[PATCH v2 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3

[Luca Weiss]

Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add
the dtsi for the PMIC and enable the notification LED on fairphone-fp3.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Changes in v2:
- Add qcom,pmi632-gpio to all the needed places in yaml
- Add patch documenting led path
- Pick up tags
- Drop vadc pre-scaling patch since it was applied
- Link to v1: https://lore.kernel.org/r/20230414-pmi632-v1-0-fe94dc414832@xxxxxxxxx

---
Luca Weiss (8):
      dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
      pinctrl: qcom: spmi-gpio: Add PMI632 support
      dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
      leds: qcom-lpg: Add support for PMI632 LPG
      dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
      arm64: dts: qcom: Add PMI632 PMIC
      arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
      Documentation: leds: Add "rgb:status" path

 .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |   1 +
 .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |   1 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           |   3 +
 Documentation/leds/well-known-leds.txt             |   1 +
 arch/arm64/boot/dts/qcom/pmi632.dtsi               | 165 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts  |  29 ++++
 drivers/leds/rgb/leds-qcom-lpg.c                   |  15 ++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |   1 +
 8 files changed, 216 insertions(+)
---
base-commit: 3f49aa65798675341eb9d4f947c40558564b2e6d
change-id: 20230414-pmi632-4ae03225ae75

Best regards,
-- 
Luca Weiss <luca@xxxxxxxxx>