Re: [patch 00/37] cpu/hotplug, x86: Reworked parallel CPU bringup

From: Paul Menzel
Date: Mon Apr 17 2023 - 13:41:29 EST


Dear Thomas,


Am 17.04.23 um 16:48 schrieb Thomas Gleixner:

On Mon, Apr 17 2023 at 13:19, Paul Menzel wrote:
Am 15.04.23 um 01:44 schrieb Thomas Gleixner:
[ 0.258193] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD
Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[…]
[ 0.259329] smp: Bringing up secondary CPUs ...
[ 0.259527] x86: Booting SMP configuration:
[ 0.259528] .... node #0, CPUs: #1
[ 0.261007] After schedule_preempt_disabled
[ 10.260990] CPU1 failed to report alive state

Weird. CPU1 fails to come up and report that it has reached the
synchronization point.

Does it work when you add cpuhp.parallel=off on the kernel command line?

Yes, the ten seconds delay is gone with `cpuhp.parallel=off`.

There was a patch set in the past, that worked on that device. I think up to v4 it did *not* work at all and hung [1]. I need some days to collect the results again.


Kind regards,

Paul


[1]: https://lore.kernel.org/lkml/ab28d2ce-4a9c-387d-9eda-558045a0c35b@xxxxxxxxxxxxx/
[ 0.000000] Linux version 6.3.0-rc6-00311-gde8224969f66 (root@bf16f3646a84) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.40) #446 SMP PREEMPT_DYNAMIC Sat Apr 15 14:12:29 UTC 2023
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc6-00311-gde8224969f66 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0 cpuhp.parallel=off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fe4cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005fe4d000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.18-9-gb640ed51b2 04/17/2023
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Initial usec timer 9249065
[ 0.000000] tsc: Detected 3899.954 MHz processor
[ 0.000755] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000759] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000763] last_pfn = 0x17f000 max_arch_pfn = 0x400000000
[ 0.000768] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000938] last_pfn = 0x5fe4d max_arch_pfn = 0x400000000
[ 0.004000] Using GB pages for direct mapping
[ 0.004000] ACPI: Early table checksum verification disabled
[ 0.004000] ACPI: RSDP 0x00000000000F6830 000024 (v02 COREv4)
[ 0.004000] ACPI: XSDT 0x000000005FE5A0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: FACP 0x000000005FE5BBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: DSDT 0x000000005FE5A280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925)
[ 0.004000] ACPI: FACS 0x000000005FE5A240 000040
[ 0.004000] ACPI: FACS 0x000000005FE5A240 000040
[ 0.004000] ACPI: SSDT 0x000000005FE5BCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[ 0.004000] ACPI: MCFG 0x000000005FE5BD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: APIC 0x000000005FE5BDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: HPET 0x000000005FE5BE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: HEST 0x000000005FE5BE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: IVRS 0x000000005FE5C030 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.004000] ACPI: SSDT 0x000000005FE5C0A0 00051F (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.004000] ACPI: SSDT 0x000000005FE5C5C0 0006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.004000] ACPI: VFCT 0x000000005FE5CC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[ 0.004000] ACPI: Reserving FACP table memory at [mem 0x5fe5bbc0-0x5fe5bcd3]
[ 0.004000] ACPI: Reserving DSDT table memory at [mem 0x5fe5a280-0x5fe5bbb9]
[ 0.004000] ACPI: Reserving FACS table memory at [mem 0x5fe5a240-0x5fe5a27f]
[ 0.004000] ACPI: Reserving FACS table memory at [mem 0x5fe5a240-0x5fe5a27f]
[ 0.004000] ACPI: Reserving SSDT table memory at [mem 0x5fe5bce0-0x5fe5bd69]
[ 0.004000] ACPI: Reserving MCFG table memory at [mem 0x5fe5bd70-0x5fe5bdab]
[ 0.004000] ACPI: Reserving APIC table memory at [mem 0x5fe5bdb0-0x5fe5be11]
[ 0.004000] ACPI: Reserving HPET table memory at [mem 0x5fe5be20-0x5fe5be57]
[ 0.004000] ACPI: Reserving HEST table memory at [mem 0x5fe5be60-0x5fe5c02f]
[ 0.004000] ACPI: Reserving IVRS table memory at [mem 0x5fe5c030-0x5fe5c09f]
[ 0.004000] ACPI: Reserving SSDT table memory at [mem 0x5fe5c0a0-0x5fe5c5be]
[ 0.004000] ACPI: Reserving SSDT table memory at [mem 0x5fe5c5c0-0x5fe5cc71]
[ 0.004000] ACPI: Reserving VFCT table memory at [mem 0x5fe5cc80-0x5fe6bee8]
[ 0.004000] No NUMA configuration found
[ 0.004000] Faking a node at [mem 0x0000000000000000-0x000000017effffff]
[ 0.004000] NODE_DATA(0) allocated [mem 0x17efe9000-0x17effffff]
[ 0.004000] Zone ranges:
[ 0.004000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.004000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.004000] Normal [mem 0x0000000100000000-0x000000017effffff]
[ 0.004000] Device empty
[ 0.004000] Movable zone start for each node
[ 0.004000] Early memory node ranges
[ 0.004000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.004000] node 0: [mem 0x0000000000100000-0x000000005fe4cfff]
[ 0.004000] node 0: [mem 0x0000000100000000-0x000000017effffff]
[ 0.004000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff]
[ 0.004000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.004000] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.004000] On node 0, zone Normal: 435 pages in unavailable ranges
[ 0.004000] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.004000] ACPI: PM-Timer IO Port: 0x818
[ 0.004000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.004000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.004000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.004000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.004000] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.004000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.004000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.004000] smpboot: smpboot: XXX end of prefill_possible_map
[ 0.004000] After prefill_possible_map
[ 0.004000] After init_cpu_to_node
[ 0.004000] After init_gi_nodes
[ 0.004000] After io_apic_init_mappings
[ 0.004000] After x86_init.hyper.guest_late_init
[ 0.004000] [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.004000] After e820
[ 0.004000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.004000] After unwind_init
[ 0.004000] After setup_arch
[ 0.004000] After setup_command_line
[ 0.004000] After setup_nr_cpu_ids
[ 0.004000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.004000] percpu: Embedded 55 pages/cpu s188328 r8192 d28760 u1048576
[ 0.004000] pcpu-alloc: s188328 r8192 d28760 u1048576 alloc=1*2097152
[ 0.004000] pcpu-alloc: [0] 0 1
[ 0.004000] After setup_per_cpu_areas
[ 0.004000] After smp_perpare_boot_cpu
[ 0.004000] After boot_cpu_hotplug_init
[ 0.004000] Fallback order for Node 0: 0
[ 0.004000] Built 1 zonelists, mobility grouping on. Total pages: 898451
[ 0.004000] Policy zone: Normal
[ 0.004000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc6-00311-gde8224969f66 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0 cpuhp.parallel=off
[ 0.004000] Unknown kernel command line parameters "noisapnp BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc6-00311-gde8224969f66", will be passed to user space.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.004000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.004000] stackdepot: allocating hash table via alloc_large_system_hash
[ 0.004000] stackdepot hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.004000] software IO TLB: area num 2.
[ 0.004000] Memory: 3477168K/3651500K available (14336K kernel code, 2340K rwdata, 5308K rodata, 2908K init, 11060K bss, 174072K reserved, 0K cma-reserved)
[ 0.004000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] After mm_init
[ 0.004000] After poking_init
[ 0.004000] ftrace: allocating 38664 entries in 152 pages
[ 0.004000] ftrace: allocated 152 pages with 3 groups
[ 0.004000] Dynamic Preempt: full
[ 0.004000] After sched_init
[ 0.004000] rcu: Preemptible hierarchical RCU implementation.
[ 0.004000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.004000] Trampoline variant of Tasks RCU enabled.
[ 0.004000] Rude variant of Tasks RCU enabled.
[ 0.004000] Tracing variant of Tasks RCU enabled.
[ 0.004000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.004000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.004000] After rcu_init
[ 0.004000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.004000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.004000] After random_init()
[ 0.004000] After boot_init_stack_canary
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] printk: console [tty0] enabled
[ 0.004000] ACPI: Core revision 20221020
[ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[ 0.004000] APIC: Done
[ 0.004000] Before apic_bsb_setup
[ 0.004000] check_timer begin
[ 0.004000] check_timer after local_irq_disable
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.004000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706e603bb55, max_idle_ns: 881590819133 ns
[ 0.145156] Calibrating delay loop (skipped), value calculated using timer frequency.. 7799.90 BogoMIPS (lpj=15599816)
[ 0.145160] pid_max: default: 32768 minimum: 301
[ 0.145254] LSM: initializing lsm=capability
[ 0.145348] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.145365] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.145738] Bit 30 in CPUID ECX not set.
[ 0.145762] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.145764] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.145769] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.145772] Spectre V2 : Mitigation: Retpolines
[ 0.145773] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.145774] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.145774] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.145775] RETBleed: Mitigation: untrained return thunk
[ 0.145777] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.145779] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.150244] Freeing SMP alternatives memory: 32K
[ 0.150249] After check_bugs
[ 0.150250] After acpi_subsystem_init
[ 0.150251] After arch_post_acpi_subsys_init
[ 0.150252] After rcu_scheduler_starting
[ 0.150324] After find_task_by_pid_ns and PF_NO_SETAFFINITY
[ 0.150329] After numa_default_policy
[ 0.150349] After rcu_read_lock
[ 0.150350] After rcu_read_unlock
[ 0.150351] After kthreadd_done
[ 0.150363] smpboot: Start of smp_prepare_cpus_common
[ 0.150365] smpboot: smpboot: zalloc 0
[ 0.150366] smpboot: smpboot: zalloc 1
[ 0.150367] smpboot: smpboot: After set_sched_topology()
[ 0.150369] smpboot: smpboot: After smp_sanity_check()
[ 0.150369] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev()
[ 0.258381] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev()
[ 0.258382] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.258615] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.258618] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.258648] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.258675] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.258703] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.258726] ... version: 0
[ 0.258727] ... bit width: 48
[ 0.258728] ... generic registers: 6
[ 0.258729] ... value mask: 0000ffffffffffff
[ 0.258730] ... max period: 00007fffffffffff
[ 0.258731] ... fixed-purpose events: 0
[ 0.258732] ... event mask: 000000000000003f
[ 0.258852] rcu: Hierarchical SRCU implementation.
[ 0.258853] rcu: Max phase no-delay instances is 1000.
[ 0.259441] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.259515] smp: Bringing up secondary CPUs ...
[ 0.259714] x86: Booting SMP configuration:
[ 0.259715] .... node #0, CPUs: #1
[ 0.121151] Bit 30 in CPUID ECX not set.
[ 0.259844] After schedule_preempt_disabled
[ 0.259849] smp: Brought up 1 node, 2 CPUs
[ 0.259849] smpboot: Max logical packages: 1
[ 0.259849] smpboot: Total of 2 processors activated (15599.81 BogoMIPS)
[ 0.261311] devtmpfs: initialized
[ 0.261311] x86/mm: Memory block size: 128MB
[ 0.262220] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.262220] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.262220] pinctrl core: initialized pinctrl subsystem
[ 0.262220] PM: RTC time: 17:24:09, date: 2023-04-17
[ 0.262220] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.262434] audit: initializing netlink subsys (disabled)
[ 0.262453] audit: type=2000 audit(1681752249.140:1): state=initialized audit_enabled=0 res=1
[ 0.262453] thermal_sys: Registered thermal governor 'fair_share'
[ 0.262453] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.262453] thermal_sys: Registered thermal governor 'step_wise'
[ 0.262453] thermal_sys: Registered thermal governor 'user_space'
[ 0.262453] cpuidle: using governor ladder
[ 0.262453] cpuidle: using governor menu
[ 0.262453] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.262453] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[ 0.262453] PCI: Using configuration type 1 for base access
[ 0.262453] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.273235] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.273235] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.273235] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.273235] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.275428] cryptd: max_cpu_qlen set to 1000
[ 0.275428] ACPI: Added _OSI(Module Device)
[ 0.275428] ACPI: Added _OSI(Processor Device)
[ 0.275428] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.275428] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.280879] ACPI: DSDT successfully acquired and loaded

[ 0.281154] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.281649] ACPI: Interpreter enabled
[ 0.281669] ACPI: PM: (supports S0 S1 S3 S5)
[ 0.281671] ACPI: Using IOAPIC for interrupt routing
[ 0.281724] HEST: Table parsing has been initialized.
[ 0.281743] GHES: Failed to enable APEI firmware first mode.
[ 0.281745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.281746] PCI: Ignoring E820 reservations for host bridge windows
[ 0.282003] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.286735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.286746] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.286838] acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.286852] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.286942] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.287197] PCI host bridge to bus 0000:00
[ 0.287199] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.287201] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.287203] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff]
[ 0.287205] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.287210] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.287234] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.287388] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.287479] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[ 0.287488] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.287493] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff]
[ 0.287498] pci 0000:00:01.0: reg 0x18: [mem 0xf0180000-0xf01bffff]
[ 0.287514] pci 0000:00:01.0: enabling Extended Tags
[ 0.287524] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.287541] pci 0000:00:01.0: supports D1 D2
[ 0.287611] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.287618] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff]
[ 0.287640] pci 0000:00:01.1: enabling Extended Tags
[ 0.287663] pci 0000:00:01.1: supports D1 D2
[ 0.287750] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.287763] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417]
[ 0.287771] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423]
[ 0.287778] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f]
[ 0.287785] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427]
[ 0.287793] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f]
[ 0.287800] pci 0000:00:11.0: reg 0x24: [mem 0xf01cc000-0xf01cc7ff]
[ 0.287954] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.287967] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff]
[ 0.288152] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.288165] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff]
[ 0.288230] pci 0000:00:12.2: supports D1 D2
[ 0.288231] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.288233] pci 0000:00:12.2: pme_poll = true
[ 0.288234] pci 0000:00:12.2: after device_set_wakeup_capable()
[ 0.288237] pci 0000:00:12.2: after pci_pme_active()
[ 0.288373] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.288387] pci 0000:00:13.0: reg 0x10: [mem 0xf01c9000-0xf01c9fff]
[ 0.288570] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.288583] pci 0000:00:13.2: reg 0x10: [mem 0xf01ce000-0xf01ce0ff]
[ 0.288650] pci 0000:00:13.2: supports D1 D2
[ 0.288652] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.288653] pci 0000:00:13.2: pme_poll = true
[ 0.288654] pci 0000:00:13.2: after device_set_wakeup_capable()
[ 0.288657] pci 0000:00:13.2: after pci_pme_active()
[ 0.288798] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.288980] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.288997] pci 0000:00:14.2: reg 0x10: [mem 0xf01c4000-0xf01c7fff 64bit]
[ 0.289052] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.289054] pci 0000:00:14.2: pme_poll = true
[ 0.289055] pci 0000:00:14.2: after device_set_wakeup_capable()
[ 0.289058] pci 0000:00:14.2: after pci_pme_active()
[ 0.290131] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.290335] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.290490] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.290504] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff]
[ 0.290677] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.290705] pci 0000:00:15.0: enabling Extended Tags
[ 0.290746] pci 0000:00:15.0: supports D1 D2
[ 0.290907] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.290939] pci 0000:00:15.1: enabling Extended Tags
[ 0.290978] pci 0000:00:15.1: supports D1 D2
[ 0.291146] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.291174] pci 0000:00:15.2: enabling Extended Tags
[ 0.291214] pci 0000:00:15.2: supports D1 D2
[ 0.291289] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.291303] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff]
[ 0.291473] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.291486] pci 0000:00:16.2: reg 0x10: [mem 0xf01cf000-0xf01cf0ff]
[ 0.291551] pci 0000:00:16.2: supports D1 D2
[ 0.291552] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.291554] pci 0000:00:16.2: pme_poll = true
[ 0.291555] pci 0000:00:16.2: after device_set_wakeup_capable()
[ 0.291558] pci 0000:00:16.2: after pci_pme_active()
[ 0.291684] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.291748] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.291806] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.291866] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.291998] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.292064] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.292136] pci_bus 0000:01: extended config space not accessible
[ 0.292200] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.292208] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.292211] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.292214] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff] (subtractive decode)
[ 0.292216] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.292261] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.292345] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.292382] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit]
[ 0.292559] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.292560] pci 0000:03:00.0: pme_poll = true
[ 0.292562] pci 0000:03:00.0: after device_set_wakeup_capable()
[ 0.292567] pci 0000:03:00.0: after pci_pme_active()
[ 0.292605] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.305215] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.305228] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.305237] pci 0000:00:15.2: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.305359] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.305378] pci 0000:04:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 0.305399] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[ 0.305413] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 0.305520] pci 0000:04:00.0: supports D1 D2
[ 0.305522] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305524] pci 0000:04:00.0: pme_poll = true
[ 0.305525] pci 0000:04:00.0: after device_set_wakeup_capable()
[ 0.305529] pci 0000:04:00.0: after pci_pme_active()
[ 0.321217] pci 0000:00:15.2: PCI bridge to [bus 04-ff]
[ 0.321228] pci 0000:00:15.2: bridge window [io 0x0000-0x0fff]
[ 0.321232] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.321237] pci 0000:00:15.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.321240] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.321759] ACPI: PCI: Interrupt link INTA configured for IRQ 0
[ 0.321855] ACPI: PCI: Interrupt link INTB configured for IRQ 0
[ 0.321949] ACPI: PCI: Interrupt link INTC configured for IRQ 0
[ 0.322041] ACPI: PCI: Interrupt link INTD configured for IRQ 0
[ 0.322134] ACPI: PCI: Interrupt link INTE configured for IRQ 0
[ 0.322232] ACPI: PCI: Interrupt link INTF configured for IRQ 0
[ 0.322325] ACPI: PCI: Interrupt link INTG configured for IRQ 0
[ 0.322418] ACPI: PCI: Interrupt link INTH configured for IRQ 0
[ 0.322640] iommu: Default domain type: Translated
[ 0.322642] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.322839] SCSI subsystem initialized
[ 0.325159] libata version 3.00 loaded.
[ 0.325159] ACPI: bus type USB registered
[ 0.325159] usbcore: registered new interface driver usbfs
[ 0.325159] usbcore: registered new interface driver hub
[ 0.325159] usbcore: registered new device driver usb
[ 0.325159] PCI: Using ACPI for IRQ routing
[ 0.325159] PCI: pci_cache_line_size set to 64 bytes
[ 0.325159] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.325159] e820: reserve RAM buffer [mem 0x5fe4d000-0x5fffffff]
[ 0.325159] e820: reserve RAM buffer [mem 0x17f000000-0x17fffffff]
[ 0.325159] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.325159] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.330232] clocksource: Switched to clocksource tsc-early
[ 0.330474] VFS: Disk quotas dquot_6.6.0
[ 0.330500] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.330620] pnp: PnP ACPI init
[ 0.330969] system 00:00: [mem 0xfec10002-0xfec11001] could not be reserved
[ 0.331362] pnp: PnP ACPI: found 2 devices
[ 0.337986] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.338186] NET: Registered PF_INET protocol family
[ 0.338359] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.340153] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.340169] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.340177] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.340251] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.340614] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.340685] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.340711] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.340827] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.340862] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[ 0.340869] pci 0000:00:15.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.340874] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.340886] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.340894] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.340898] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.340908] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref]
[ 0.340922] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref]
[ 0.340934] pci 0000:04:00.0: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.340941] pci 0000:00:15.2: PCI bridge to [bus 04]
[ 0.340943] pci 0000:00:15.2: bridge window [io 0x2000-0x2fff]
[ 0.340949] pci 0000:00:15.2: bridge window [mem 0x80000000-0x800fffff 64bit pref]
[ 0.340956] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.340958] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.340960] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.340964] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
[ 0.340966] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.340968] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.340970] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff]
[ 0.340973] pci_bus 0000:01: resource 7 [mem 0x80000000-0xffffffff]
[ 0.340975] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.340977] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.340979] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref]
[ 0.341104] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.341412] pci 0000:00:12.0: AMD USB device
[ 0.341436] pci 0000:00:12.0: AMD USB ohci handoff
[ 0.341833] pci 0000:00:12.2: AMD USB device
[ 0.341847] pci 0000:00:12.2: AMD USB ehci handoff
[ 0.342032] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.342235] pci 0000:00:13.0: AMD USB device
[ 0.342250] pci 0000:00:13.0: AMD USB ohci handoff
[ 0.342633] pci 0000:00:13.2: AMD USB device
[ 0.342650] pci 0000:00:13.2: AMD USB ehci handoff
[ 0.342830] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.343041] pci 0000:00:14.5: AMD USB device
[ 0.343057] pci 0000:00:14.5: AMD USB ohci handoff
[ 0.343577] pci 0000:00:16.0: AMD USB device
[ 0.343598] pci 0000:00:16.0: AMD USB ohci handoff
[ 0.343993] pci 0000:00:16.2: AMD USB device
[ 0.344008] pci 0000:00:16.2: AMD USB ehci handoff
[ 0.344202] pci 0000:00:16.2: PME# does not work under D3, disabling it
[ 0.344510] pci 0000:03:00.0: AMD USB xhci handoff
[ 0.344577] PCI: CLS 64 bytes, default 64
[ 0.344678] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround
[ 0.344790] pci 0000:00:01.0: Adding to iommu group 0
[ 0.344813] pci 0000:00:01.1: Adding to iommu group 0
[ 0.344844] pci 0000:00:11.0: Adding to iommu group 1
[ 0.344885] pci 0000:00:12.0: Adding to iommu group 2
[ 0.344905] pci 0000:00:12.2: Adding to iommu group 2
[ 0.344949] pci 0000:00:13.0: Adding to iommu group 3
[ 0.344970] pci 0000:00:13.2: Adding to iommu group 3
[ 0.345020] pci 0000:00:14.0: Adding to iommu group 4
[ 0.345043] pci 0000:00:14.2: Adding to iommu group 4
[ 0.345066] pci 0000:00:14.3: Adding to iommu group 4
[ 0.345102] pci 0000:00:14.4: Adding to iommu group 5
[ 0.345128] pci 0000:00:14.5: Adding to iommu group 6
[ 0.345172] pci 0000:00:15.0: Adding to iommu group 7
[ 0.345198] pci 0000:00:15.1: Adding to iommu group 7
[ 0.345219] pci 0000:00:15.2: Adding to iommu group 7
[ 0.345261] pci 0000:00:16.0: Adding to iommu group 8
[ 0.345285] pci 0000:00:16.2: Adding to iommu group 8
[ 0.345349] pci 0000:00:18.0: Adding to iommu group 9
[ 0.345374] pci 0000:00:18.1: Adding to iommu group 9
[ 0.345400] pci 0000:00:18.2: Adding to iommu group 9
[ 0.345428] pci 0000:00:18.3: Adding to iommu group 9
[ 0.345451] pci 0000:00:18.4: Adding to iommu group 9
[ 0.345479] pci 0000:00:18.5: Adding to iommu group 9
[ 0.345489] pci 0000:03:00.0: Adding to iommu group 7
[ 0.345499] pci 0000:04:00.0: Adding to iommu group 7
[ 0.348265] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.348272] AMD-Vi: Extended features (0x800000853, 0x0): PreF PPR GT IA
[ 0.348279] AMD-Vi: Interrupt remapping enabled
[ 0.348484] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.348486] software IO TLB: mapped [mem 0x000000005be4d000-0x000000005fe4d000] (64MB)
[ 0.348547] LVT offset 0 assigned for vector 0x400
[ 0.348595] perf: AMD IBS detected (0x000000ff)
[ 0.348602] amd_uncore: 4 amd_nb counters detected
[ 0.352225] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[ 0.352259] zbud: loaded
[ 0.352752] NET: Registered PF_ALG protocol family
[ 0.352758] Key type asymmetric registered
[ 0.352759] Asymmetric key parser 'x509' registered
[ 0.353113] alg: self-tests disabled
[ 0.353209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.353263] io scheduler mq-deadline registered
[ 0.353265] io scheduler kyber registered
[ 0.354479] pcieport 0000:00:15.0: PME: Signaling with IRQ 25
[ 0.354644] pcieport 0000:00:15.1: PME: Signaling with IRQ 26
[ 0.354712] pcieport 0000:00:15.2: enabling device (0000 -> 0003)
[ 0.354941] pcieport 0000:00:15.2: PME: Signaling with IRQ 27
[ 0.355211] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.355298] ACPI: button: Power Button [PWRF]
[ 0.355363] ACPI: \_SB_.P000: Found 2 idle states
[ 0.355495] ACPI: \_SB_.P001: Found 2 idle states
[ 0.356442] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.356445] ACPI: thermal: Thermal Zone [TZ00] (21 C)
[ 0.356797] Non-volatile memory driver v1.3
[ 0.356864] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 0.357065] ahci 0000:00:11.0: version 3.0
[ 0.357356] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode
[ 0.357360] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 0.358785] scsi host0: ahci
[ 0.358999] scsi host1: ahci
[ 0.359215] scsi host2: ahci
[ 0.359424] scsi host3: ahci
[ 0.359624] scsi host4: ahci
[ 0.359836] scsi host5: ahci
[ 0.360048] scsi host6: ahci
[ 0.360243] scsi host7: ahci
[ 0.360336] ata port1: DUMMY
[ 0.360338] ata port2: DUMMY
[ 0.360339] ata port3: DUMMY
[ 0.360341] ata port4: DUMMY
[ 0.360342] ata port5: DUMMY
[ 0.360343] ata port6: DUMMY
[ 0.360345] ata port7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19
[ 0.360347] ata port8: DUMMY
[ 0.360431] ACPI: bus type drm_connector registered
[ 0.360734] i8042: PNP: No PS/2 controller found.
[ 0.360736] i8042: Probing ports directly.
[ 0.363078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.363185] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.363347] mousedev: PS/2 mouse device common for all mice
[ 0.363420] rtc_cmos 00:01: RTC can wake from S4
[ 0.363924] rtc_cmos 00:01: registered as rtc0
[ 0.363950] rtc_cmos 00:01: setting system clock to 2023-04-17T17:24:09 UTC (1681752249)
[ 0.364011] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 0.364048] device-mapper: uevent: version 1.0.3
[ 0.364136] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@xxxxxxxxxx
[ 0.364301] hid: raw HID events driver (C) Jiri Kosina
[ 0.364335] usbcore: registered new interface driver usbhid
[ 0.364336] usbhid: USB HID core driver
[ 0.364427] Initializing XFRM netlink socket
[ 0.364436] NET: Registered PF_PACKET protocol family
[ 0.364438] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 0.364652] microcode: CPU1: patch_level=0x0600111f
[ 0.364652] microcode: CPU0: patch_level=0x0600111f
[ 0.364664] microcode: Microcode Update Driver: v2.2.
[ 0.364668] IPI shorthand broadcast: enabled
[ 0.364678] AVX version of gcm_enc/dec engaged.
[ 0.364710] AES CTR mode by8 optimization enabled
[ 0.368578] sched_clock: Marking stable (249972593, 117151517)->(369867515, -2743405)
[ 0.368823] registered taskstats version 1
[ 0.369080] zswap: loaded using pool lzo/zbud
[ 0.371663] ata link7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.371939] ata dev7.0: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 0.371942] ata dev7.0: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[ 0.372148] ata dev7.0: configured for UDMA/133
[ 0.372283] scsi 6:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 0.373496] kmemleak: Kernel memory leak detector initialized (mem pool available: 15679)
[ 0.373501] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 0.373959] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 0.373982] sd 6:0:0:0: [sda] Write Protect is off
[ 0.373987] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.374015] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.374059] sd 6:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.380407] kmemleak: Automatic memory scanning thread started
[ 0.380633] sda: sda1 sda2 sda3
[ 0.381120] Key type encrypted registered
[ 0.381248] sd 6:0:0:0: [sda] Attached SCSI disk
[ 0.384294] PM: Magic number: 3:443:441
[ 0.396721] EXT4-fs (sda3): mounted filesystem fe29e0dc-6303-4401-987c-8472bc1b9516 with ordered data mode. Quota mode: none.
[ 0.396766] VFS: Mounted root (ext4 filesystem) on device 8:3.
[ 0.398650] devtmpfs: mounted
[ 0.398668] After kernel_init_freeable
[ 0.403170] Freeing unused kernel image (initmem) memory: 2908K
[ 0.415639] Write protecting the kernel read-only data: 20480k
[ 0.415922] Freeing unused kernel image (rodata/data gap) memory: 836K
[ 0.453024] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.453030] rodata_test: all tests were successful
[ 0.453031] After mark_readonly
[ 0.453031] After pti_finalize
[ 0.453045] rcu_end_inkernel_boot
[ 0.453054] Run /sbin/init as init process
[ 0.453055] with arguments:
[ 0.453057] /sbin/init
[ 0.453058] noisapnp
[ 0.453059] with environment:
[ 0.453060] HOME=/
[ 0.453060] TERM=linux
[ 0.453061] BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc6-00311-gde8224969f66
[ 0.629518] systemd[1]: Inserted module 'autofs4'
[ 0.656601] NET: Registered PF_INET6 protocol family
[ 0.657495] Segment Routing with IPv6
[ 0.657523] In-situ OAM (IOAM) with IPv6
[ 0.683745] systemd[1]: systemd 252.6-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 0.683756] systemd[1]: Detected architecture x86-64.
[ 0.688485] systemd[1]: Hostname set to <kodi>.
[ 0.959071] systemd[1]: Queued start job for default target graphical.target.
[ 0.982198] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 0.983286] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 0.984123] systemd[1]: Created slice user.slice - User and Session Slice.
[ 0.984302] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 0.984417] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 0.984855] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 0.984894] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 0.984934] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 0.984972] systemd[1]: Reached target paths.target - Path Units.
[ 0.985006] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 0.985038] systemd[1]: Reached target slices.target - Slice Units.
[ 0.985078] systemd[1]: Reached target swap.target - Swaps.
[ 0.985116] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 0.987550] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
[ 0.987802] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 0.987975] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 0.988274] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 0.988543] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 0.988822] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 0.989072] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
[ 0.989946] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 0.990210] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 0.992904] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 0.995944] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 0.999142] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 1.002682] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 1.007256] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 1.014276] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 1.017399] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 1.020657] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 1.024006] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 1.027278] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 1.036066] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 1.036151] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 1.036237] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 1.036279] systemd[1]: Reached target local-fs.target - Local File Systems.
[ 1.036362] systemd[1]: apparmor.service - Load AppArmor profiles was skipped because of an unmet condition check (ConditionSecurity=apparmor).
[ 1.041356] loop: module loaded
[ 1.043749] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
[ 1.048983] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 1.050740] fuse: init (API version 7.38)
[ 1.052824] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 1.063924] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 1.068061] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 1.071328] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 1.093517] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 1.094134] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 1.094447] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 1.094985] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 1.095974] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 1.096888] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 1.097257] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 1.098001] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 1.098339] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 1.099077] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 1.099446] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 1.100518] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 1.100846] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 1.101749] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 1.102064] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 1.102810] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 1.103142] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 1.103830] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 138 (systemd-binfmt)
[ 1.123242] systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
[ 1.140028] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 1.148223] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 1.148346] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 1.148515] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 1.159909] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 1.184529] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 1.186000] systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
[ 1.186357] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 1.186600] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 1.209823] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 1.210512] systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
[ 1.254273] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 1.273469] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 1.313286] systemd[1]: Started systemd-journald.service - Journal Service.
[ 1.359636] systemd-journald[139]: Received client request to flush runtime journal.
[ 1.369173] tsc: Refined TSC clocksource calibration: 3900.223 MHz
[ 1.369184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705a6472c, max_idle_ns: 881590586812 ns
[ 1.369200] clocksource: Switched to clocksource tsc
[ 1.594559] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.731704] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.953174] random: crng init done
[ 1.992654] QUIRK: Enable AMD PLL fix
[ 1.992706] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.992738] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.992751] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.992760] ehci-pci 0000:00:12.2: debug port 1
[ 1.992971] ehci-pci 0000:00:12.2: irq 17, io mem 0xf01cd000
[ 2.005197] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.005468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 2.005471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.005474] usb usb1: Product: EHCI Host Controller
[ 2.005476] usb usb1: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ehci_hcd
[ 2.005478] usb usb1: SerialNumber: 0000:00:12.2
[ 2.006279] hub 1-0:1.0: USB hub found
[ 2.006321] hub 1-0:1.0: 5 ports detected
[ 2.007319] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.007345] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.007360] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.007369] ehci-pci 0000:00:13.2: debug port 1
[ 2.007523] ehci-pci 0000:00:13.2: irq 17, io mem 0xf01ce000
[ 2.016141] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.016147] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 2.016788] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.021184] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.021523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 2.021527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.021529] usb usb2: Product: EHCI Host Controller
[ 2.021531] usb usb2: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ehci_hcd
[ 2.021533] usb usb2: SerialNumber: 0000:00:13.2
[ 2.032086] hub 2-0:1.0: USB hub found
[ 2.032171] hub 2-0:1.0: 5 ports detected
[ 2.033420] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.033455] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.033470] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.033479] ehci-pci 0000:00:16.2: debug port 1
[ 2.033641] ehci-pci 0000:00:16.2: irq 17, io mem 0xf01cf000
[ 2.049177] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.049454] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 2.049459] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.049461] usb usb3: Product: EHCI Host Controller
[ 2.049463] usb usb3: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ehci_hcd
[ 2.049465] usb usb3: SerialNumber: 0000:00:16.2
[ 2.050025] hub 3-0:1.0: USB hub found
[ 2.050070] hub 3-0:1.0: 4 ports detected
[ 2.050881] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.050910] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
[ 2.050999] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.051021] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 2.051110] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000
[ 2.051111] ohci-pci 0000:00:12.0: irq 18, io mem 0xf01c8000
[ 2.051120] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.051141] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 2.051240] ohci-pci 0000:00:13.0: irq 18, io mem 0xf01c9000
[ 2.051250] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.051268] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.051356] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000
[ 2.113579] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[ 2.113586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.113589] usb usb4: Product: OHCI PCI host controller
[ 2.113591] usb usb4: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ohci_hcd
[ 2.113593] usb usb4: SerialNumber: 0000:00:16.0
[ 2.114096] hub 4-0:1.0: USB hub found
[ 2.114127] hub 4-0:1.0: 4 ports detected
[ 2.126194] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[ 2.126202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.126204] usb usb5: Product: OHCI PCI host controller
[ 2.126207] usb usb5: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ohci_hcd
[ 2.126209] usb usb5: SerialNumber: 0000:00:12.0
[ 2.127341] hub 5-0:1.0: USB hub found
[ 2.127380] hub 5-0:1.0: 5 ports detected
[ 2.128522] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[ 2.128528] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.128531] usb usb6: Product: OHCI PCI host controller
[ 2.128533] usb usb6: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ohci_hcd
[ 2.128535] usb usb6: SerialNumber: 0000:00:13.0
[ 2.129049] hub 6-0:1.0: USB hub found
[ 2.129082] hub 6-0:1.0: 5 ports detected
[ 2.130311] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[ 2.130316] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.130319] usb usb7: Product: OHCI PCI host controller
[ 2.130321] usb usb7: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 ohci_hcd
[ 2.130323] usb usb7: SerialNumber: 0000:00:14.5
[ 2.130855] hub 7-0:1.0: USB hub found
[ 2.130895] hub 7-0:1.0: 2 ports detected
[ 2.148137] 1
[ 2.148196] 2
[ 2.148820] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 2.148832] 3
[ 2.148833] 4
[ 2.148834] 5
[ 2.148835] 7
[ 2.148837] 8
[ 2.148837] 9
[ 2.148929] 1
[ 2.148979] 2
[ 2.149637] 3
[ 2.149641] 4
[ 2.149642] 5
[ 2.149643] 7
[ 2.149645] 8
[ 2.149646] 9
[ 2.166674] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.166707] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[ 2.206853] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[ 2.208133] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[ 2.221615] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 2.222377] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 2.222384] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.222387] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.222390] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.222392] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 2.222393] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.222395] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.222398] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.222399] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.222401] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
[ 2.231811] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080010
[ 2.235245] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[ 2.265051] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.265076] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[ 2.265092] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 2.266951] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 2.266958] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.266961] usb usb8: Product: xHCI Host Controller
[ 2.266963] usb usb8: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 xhci-hcd
[ 2.266965] usb usb8: SerialNumber: 0000:03:00.0
[ 2.267014] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3
[ 2.267354] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[ 2.267750] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 2.268089] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 2.268437] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 2.268783] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 2.269132] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 2.269714] hub 8-0:1.0: USB hub found
[ 2.269815] hub 8-0:1.0: 2 ports detected
[ 2.269956] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 2.272826] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.273006] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[ 2.273010] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273012] usb usb9: Product: xHCI Host Controller
[ 2.273014] usb usb9: Manufacturer: Linux 6.3.0-rc6-00311-gde8224969f66 xhci-hcd
[ 2.273016] usb usb9: SerialNumber: 0000:03:00.0
[ 2.275521] hub 9-0:1.0: USB hub found
[ 2.275649] hub 9-0:1.0: 2 ports detected
[ 2.295318] r8169 0000:04:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 32
[ 2.295327] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 2.311845] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 2.421403] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[ 2.421415] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2)
[ 2.421903] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 2.465163] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.472735] [drm] radeon kernel modesetting enabled.
[ 2.474200] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1002:0x9996 0x00).
[ 2.474271] ATOM BIOS: 113
[ 2.474372] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 2.474376] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 2.474384] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.474385] [drm] RAM width 64bits DDR
[ 2.474589] [drm] radeon: 512M of VRAM memory ready
[ 2.474595] [drm] radeon: 1024M of GTT memory ready.
[ 2.474642] [drm] Loading ARUBA Microcode
[ 2.481608] [drm] Internal thermal controller without fan control
[ 2.481974] [drm] radeon: dpm initialized
[ 2.486664] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 2.486711] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.492402] r8169 0000:04:00.0 enp4s0: Link is Down
[ 2.526396] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[ 2.529843] [drm] GART: Done restoring entries
[ 2.529847] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 2.530087] radeon 0000:00:01.0: WB enabled
[ 2.530090] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[ 2.530468] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 2.550526] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
[ 2.550531] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
[ 2.550533] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
[ 2.550535] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
[ 2.550536] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[ 2.550538] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
[ 2.550809] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 2.551003] radeon 0000:00:01.0: radeon: using MSI.
[ 2.551071] [drm] radeon: irq initialized.
[ 2.569579] [drm] ring test on 0 succeeded in 3 usecs
[ 2.569589] [drm] ring test on 3 succeeded in 4 usecs
[ 2.569596] [drm] ring test on 4 succeeded in 4 usecs
[ 2.583595] [drm] ring test on 5 succeeded in 2 usecs
[ 2.585593] [drm] UVD initialized successfully.
[ 2.670213] usb 5-1: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[ 2.670218] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.670220] usb 5-1: Product: Dell QuietKey Keyboard
[ 2.670222] usb 5-1: Manufacturer: DELL
[ 2.678027] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:413C:2106.0001/input/input11
[ 2.694994] [drm] ring test on 6 succeeded in 18 usecs
[ 2.695006] [drm] ring test on 7 succeeded in 3 usecs
[ 2.695007] [drm] VCE initialized successfully.
[ 2.695174] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops radeon_audio_component_bind_ops [radeon])
[ 2.695346] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.695400] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.695449] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.713280] [drm] ib test on ring 5 succeeded
[ 2.729270] [drm] ib test on ring 6 succeeded in 1 usecs
[ 2.737964] hid-generic 0003:413C:2106.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-1/input0
[ 2.745270] [drm] ib test on ring 7 succeeded in 1 usecs
[ 2.748783] [drm] Radeon Display Connectors
[ 2.748789] [drm] Connector 0:
[ 2.748790] [drm] DP-1
[ 2.748791] [drm] HPD1
[ 2.748792] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 2.748795] [drm] Encoders:
[ 2.748796] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.748797] [drm] Connector 1:
[ 2.748798] [drm] VGA-1
[ 2.748799] [drm] HPD2
[ 2.748800] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 2.748802] [drm] Encoders:
[ 2.748803] [drm] CRT1: INTERNAL_UNIPHY2
[ 2.748804] [drm] CRT1: NUTMEG
[ 2.748805] [drm] Connector 2:
[ 2.748806] [drm] HDMI-A-1
[ 2.748807] [drm] HPD3
[ 2.748808] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 2.748811] [drm] Encoders:
[ 2.748811] [drm] DFP2: INTERNAL_UNIPHY
[ 3.019999] [drm] fb mappable at 0xE03E9000
[ 3.020006] [drm] vram apper at 0xE0000000
[ 3.020009] [drm] size 5242880
[ 3.020011] [drm] fb depth is 24
[ 3.020012] [drm] pitch is 5120
[ 3.020508] fbcon: radeondrmfb (fb0) is primary device
[ 3.201239] usb 5-2: new low-speed USB device number 3 using ohci-pci
[ 3.215988] Console: switching to colour frame buffer device 160x64
[ 3.217767] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 3.237462] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 3.397485] usb 5-2: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[ 3.397493] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.397495] usb 5-2: Product: Optical USB Mouse
[ 3.397497] usb 5-2: Manufacturer: Logitech
[ 3.406006] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:046D:C016.0002/input/input12
[ 3.406790] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-2/input0
[ 5.100538] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 5.100555] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 5.945432] [drm] amdgpu kernel modesetting enabled.
[ 10.066361] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=258 'systemd'