Re: [PATCH v2] KVM: x86: Fix poll command

From: Sean Christopherson
Date: Mon Apr 17 2023 - 12:52:04 EST


On Sat, Apr 15, 2023, alexjlzheng@xxxxxxxxx wrote:
> On Fri, 14 Apr 2023, Sean Christopherson <seanjc@xxxxxxxxxx> wrote:
> > On Thu, Apr 13, 2023, alexjlzheng@xxxxxxxxx wrote:
> > > Fix the implementation of pic_poll_read():
> > > 1. Set Bit 7 when there is an interrupt
> > > 2. Return 0 when there is no interrupt
> >
> > I don't think #2 is justified. The spec says:
> >
> > The interrupt requests are ordered in priority from 0 through 7 (0 highest).
>
> This is only true when don't use rotation for priority or just reset the 8259a.
> It's prossible to change priorities, i.e. Specific Rotation Mode or Automatic
> Rotation Mode.
>
> >
> > I.e. the current code enumerates the _lowest_ priority when there is no interrupt,
> > which seems more correct than reporting the highest priority possible.
>
> The practice and interpretation of returning to the lowest priority interrupt
> when there are no active interrupts in the PIC doesn't seem reasonable, as far as I
> understand. For #2, in my opinion, the correct interpretation of the current code
> may be that a spurious interrupt is returned(IRQ 7 is used for that according to
> the 8259 hardware manual).
>
> For #2, the main purpose of returning 0 is to set Bit 7 of the return value to 0
> to indicate that there is no interrupt.

Is there an actual real world chunk of guest code that is broken by KVM's behavior
for the "no interrupt" case? Because if not, my strong preference is to leave the
code as-is.

I have no objection to setting bit 7 when there is an interrupt, as that behavior
is explicitly called out and KVM is clearly in the wrong.

But for the "no interrupt" case, there are a lot of "mays" and "seems" in both of
our responses, i.e. it's not obvious that the current code is outright wrong, nor
that it is correct either. Given the lack of clarity, unless there's a guest that's
actually broken by KVM's current implementation, I see no benefit to changing KVM's
behavior, only the potential for breaking existing KVM guests.

And if the "no interrupt" case really does need to be fixed, please split it to
a separate patch.