[PATCH v5 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED

From: Andreas Kemnade
Date: Sun Apr 16 2023 - 17:16:47 EST


Document ROHM BD2606MVV LED driver devicetree bindings.

Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Reviewed-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
.../bindings/leds/rohm,bd2606mvv.yaml | 81 +++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml

diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 0000000000000..14700a2e5feaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD2606MVV LED controller
+
+maintainers:
+ - Andreas Kemnade <andreas@xxxxxxxxxxxx>
+
+description:
+ The BD2606 MVV is a programmable LED controller connected via I2C that can
+ drive 6 separate lines. Each of them can be individually switched on and off,
+ but the brightness setting is shared between pairs of them.
+
+ Datasheet is available at
+ https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+ compatible:
+ const: rohm,bd2606mvv
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO pin to enable/disable the device.
+
+patternProperties:
+ "^led@[0-6]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 6
+
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@66 {
+ compatible = "rohm,bd2606mvv";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+ };
+ };
+ };
+
+...
--
2.39.2