[PATCH 0/8] Add PMI632 PMIC and RGB LED on sdm632-fairphone-fp3

[Luca Weiss]

Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add
the dtsi for the PMIC and enable the notification LED on fairphone-fp3.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
Luca Weiss (8):
      dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
      pinctrl: qcom: spmi-gpio: Add PMI632 support
      dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block
      leds: qcom-lpg: Add support for PMI632 LPG
      dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scaling
      dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible
      arm64: dts: qcom: Add PMI632 PMIC
      arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED

 .../bindings/iio/adc/qcom,spmi-vadc.yaml           |   2 +-
 .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |   1 +
 .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |   1 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           |   2 +
 arch/arm64/boot/dts/qcom/pmi632.dtsi               | 165 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts  |  29 ++++
 drivers/leds/rgb/leds-qcom-lpg.c                   |  15 ++
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c           |   1 +
 8 files changed, 215 insertions(+), 1 deletion(-)
---
base-commit: c83fb1e4acf528c29b0729525cf23544f8121b3d
change-id: 20230414-pmi632-4ae03225ae75

Best regards,
-- 
Luca Weiss <luca@xxxxxxxxx>