Re: [PATCH v7 09/12] clk: nuvoton: Add clock driver for ma35d1 clock controller

[Stephen Boyd]

Quoting Jacky Huang (2023-04-11 22:38:21)
> diff --git a/drivers/clk/nuvoton/clk-ma35d1-divider.c b/drivers/clk/nuvoton/clk-ma35d1-divider.c
> new file mode 100644
> index 000000000000..8d573ba3dfd3
> --- /dev/null
> +++ b/drivers/clk/nuvoton/clk-ma35d1-divider.c
> @@ -0,0 +1,134 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
[...]
> +struct clk_hw *ma35d1_reg_adc_clkdiv(struct device *dev, const char *name,
> +                                    const char *parent_name,
> +                                    spinlock_t *lock,
> +                                    unsigned long flags, void __iomem *reg,
> +                                    u8 shift, u8 width, u32 mask_bit)
> +{
> +       struct ma35d1_adc_clk_div *div;
> +       struct clk_init_data init;
> +       struct clk_div_table *table;
> +       u32 max_div, min_div;
> +       struct clk_hw *hw;
> +       int ret;
> +       int i;
> +
> +       div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
> +       if (!div)
> +               return ERR_PTR(-ENOMEM);
> +
> +       max_div = clk_div_mask(width) + 1;
> +       min_div = 1;
> +
> +       table = devm_kcalloc(dev, max_div + 1, sizeof(*table), GFP_KERNEL);
> +       if (!table)
> +               return ERR_PTR(-ENOMEM);
> +
> +       for (i = 0; i < max_div; i++) {
> +               table[i].val = min_div + i;
> +               table[i].div = 2 * table[i].val;
> +       }
> +       table[max_div].val = 0;
> +       table[max_div].div = 0;
> +
> +       init.name = name;
> +       init.ops = &ma35d1_adc_clkdiv_ops;
> +       init.flags |= flags;
> +       init.parent_names = parent_name ? &parent_name : NULL;

Can you use parent_data instead?

> +       init.num_parents = parent_name ? 1 : 0;
> +
> +       div->reg = reg;
> +       div->shift = shift;
> +       div->width = width;
> +       div->mask = mask_bit ? BIT(mask_bit) : 0;
> +       div->lock = lock;
> +       div->hw.init = &init;
> +       div->table = table;
> +
> +       hw = &div->hw;
> +       ret = devm_clk_hw_register(dev, hw);
> +       if (ret)
> +               return ERR_PTR(ret);
> +       return hw;
> +}
> diff --git a/drivers/clk/nuvoton/clk-ma35d1-pll.c b/drivers/clk/nuvoton/clk-ma35d1-pll.c
> new file mode 100644
> index 000000000000..6de67c964a2d
> --- /dev/null
> +++ b/drivers/clk/nuvoton/clk-ma35d1-pll.c
> @@ -0,0 +1,315 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
> + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk-provider.h>
> +#include <linux/container_of.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +
> +#include "clk-ma35d1.h"
> +
> +struct ma35d1_clk_pll {
> +       struct clk_hw hw;
> +       u8 type;
> +       u8 mode;
> +       void __iomem *ctl0_base;
> +       void __iomem *ctl1_base;
> +       void __iomem *ctl2_base;
> +};
> +
[..]
> +struct clk_hw *ma35d1_reg_clk_pll(enum ma35d1_pll_type type,
> +                                 struct device *dev,
> +                                 u8 u8mode, const char *name,
> +                                 const char *parent,
> +                                 void __iomem *base)
> +{
> +       struct ma35d1_clk_pll *pll;
> +       struct clk_hw *hw;
> +       struct clk_init_data init = {};
> +       int ret;
> +
> +       pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
> +       if (!pll)
> +               return ERR_PTR(-ENOMEM);
> +
> +       pll->type = type;
> +       pll->mode = u8mode;
> +       pll->ctl0_base = base + REG_PLL_CTL0_OFFSET;
> +       pll->ctl1_base = base + REG_PLL_CTL1_OFFSET;
> +       pll->ctl2_base = base + REG_PLL_CTL2_OFFSET;
> +
> +       init.name = name;
> +       init.flags = 0;
> +       init.parent_names = &parent;

Can you use parent_data instead?

> +       init.num_parents = 1;
> +
> +       if (type == MA35D1_CAPLL || type == MA35D1_DDRPLL)
> +               init.ops = &ma35d1_clk_fixed_pll_ops;
> +       else
> +               init.ops = &ma35d1_clk_pll_ops;
> +
> +       pll->hw.init = &init;
> +       hw = &pll->hw;
> +
> +       ret = devm_clk_hw_register(dev, hw);
> +       if (ret)
> +               return ERR_PTR(ret);
> +       return hw;
> +}
> diff --git a/drivers/clk/nuvoton/clk-ma35d1.c b/drivers/clk/nuvoton/clk-ma35d1.c
> new file mode 100644
> index 000000000000..066e1c6f2d35
> --- /dev/null
> +++ b/drivers/clk/nuvoton/clk-ma35d1.c
> @@ -0,0 +1,897 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
> + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> +
> +#include "clk-ma35d1.h"
> +
> +static DEFINE_SPINLOCK(ma35d1_lock);
> +
> +static const struct clk_parent_data ca35clk_sel_clks[] = {
> +       { .fw_name = "hxt", .name = "hxt" },
> +       { .fw_name = "capll", .name = "capll" },
> +       { .fw_name = "ddrpll", .name = "ddrpll" },
> +       { .fw_name = "dummy", .name = "dummy" }

What is 'dummy'? Is that in the binding? Note, don't put both .fw_name
and .name in the binding. For new drivers, prefer to use .index or .hw
and never use .name to describe parents.

> +};
> +
> +static const char *const sysclk0_sel_clks[] = {
> +       "epll_div2", "syspll"
[...]
> diff --git a/drivers/clk/nuvoton/clk-ma35d1.h b/drivers/clk/nuvoton/clk-ma35d1.h
> new file mode 100644
> index 000000000000..28c60f081788
> --- /dev/null
> +++ b/drivers/clk/nuvoton/clk-ma35d1.h
> @@ -0,0 +1,123 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2023 Nuvoton Technology Corp.
> + * Author: Chi-Fang Li <cfli0@xxxxxxxxxxx>
> + */
> +
> +#ifndef __DRV_CLK_NUVOTON_MA35D1_H
> +#define __DRV_CLK_NUVOTON_MA35D1_H

Is this header included in one C file? If so, remove the header file and
put the contents in the C file.