Re: [PATCH v2 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval

[Srinivas Kandagatla]

On 03/04/2023 14:24, Krzysztof Kozlowski wrote:
> The port sample interval was always 16-bit, split into low and high
> bytes.  This split was unnecessary, although harmless for older devices
> because all of them used only lower byte (so values < 0xff).  With
> support for Soundwire controller on Qualcomm SM8550 and its devices,
> both bytes will be used, thus add a new 'qcom,ports-sinterval' property
> to allow 16-bit sample intervals.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>   .../bindings/soundwire/qcom,soundwire.yaml    | 22 +++++++++++++++++--
>   1 file changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> index c283c594fb5c..883b8be9be1b 100644
> --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
> @@ -86,7 +86,7 @@ properties:
>     qcom,ports-sinterval-low:
>       $ref: /schemas/types.yaml#/definitions/uint8-array
>       description:
> -      Sample interval low of each data port.
> +      Sample interval (only lowest byte) of each data port.
>         Out ports followed by In ports. Used for Sample Interval calculation.
>         Value of 0xff indicates that this option is not implemented
>         or applicable for the respective data port.
> @@ -94,6 +94,19 @@ properties:
>       minItems: 3
>       maxItems: 16
>   
> +  qcom,ports-sinterval:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array

Should this not be ref: /schemas/types.yaml#/definitions/uint16-array ?


--srini
> +    description:
> +      Sample interval of each data port.
> +      Out ports followed by In ports. Used for Sample Interval calculation.
> +      Value of 0xffff indicates that this option is not implemented
> +      or applicable for the respective data port.
> +      More info in MIPI Alliance SoundWire 1.0 Specifications.
> +    minItems: 3
> +    maxItems: 16
> +    items:
> +      maximum: 0xffff
> +
>     qcom,ports-offset1:
>       $ref: /schemas/types.yaml#/definitions/uint8-array
>       description:
> @@ -219,10 +232,15 @@ required:
>     - '#size-cells'
>     - qcom,dout-ports
>     - qcom,din-ports
> -  - qcom,ports-sinterval-low
>     - qcom,ports-offset1
>     - qcom,ports-offset2
>   
> +oneOf:
> +  - required:
> +      - qcom,ports-sinterval-low
> +  - required:
> +      - qcom,ports-sinterval
> +
>   additionalProperties: false
>   
>   examples: