Re: [PATCH 20/27] arm64: dts: mediatek: mt6795: Add tertiary PWM node

From: Matthias Brugger
Date: Wed Apr 12 2023 - 08:44:05 EST




On 12/04/2023 13:27, AngeloGioacchino Del Regno wrote:
The PWM at 0x11006000 is the tertiary PWM; unlike PWM0, PWM1, this is
not display specific and can be used as a generic PWM controller.

This node is left disabled as usage is board-specific.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Applied, thanks!

---
arch/arm64/boot/dts/mediatek/mt6795.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index cf45cb4ad3d2..50d9276d18c6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -583,6 +583,25 @@ uart3: serial@11005000 {
status = "disabled";
};
+ pwm2: pwm@11006000 {
+ compatible = "mediatek,mt6795-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM>,
+ <&pericfg CLK_PERI_PWM1>,
+ <&pericfg CLK_PERI_PWM2>,
+ <&pericfg CLK_PERI_PWM3>,
+ <&pericfg CLK_PERI_PWM4>,
+ <&pericfg CLK_PERI_PWM5>,
+ <&pericfg CLK_PERI_PWM6>,
+ <&pericfg CLK_PERI_PWM7>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+ "pwm4", "pwm5", "pwm6", "pwm7";
+ status = "disabled";
+ };
+
i2c0: i2c@11007000 {
compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;