Re: [PATCH v8 2/2] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

From: Bhupesh Sharma
Date: Tue Apr 11 2023 - 08:18:21 EST


On Tue, 11 Apr 2023 at 13:17, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On 10/04/2023 20:10, Bhupesh Sharma wrote:
> > Add USB superspeed qmp phy node to dtsi.
> >
> > Make sure that the various board dts files (which include sm4250.dtsi file)
> > continue to work as intended.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> > .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
> > arch/arm64/boot/dts/qcom/sm6115.dtsi | 29 +++++++++++++++++--
> > .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++
> > 3 files changed, 33 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > index a1f0622db5a0..75951fd439df 100644
> > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > @@ -242,6 +242,9 @@ &usb {
> > &usb_dwc3 {
> > maximum-speed = "high-speed";
> > dr_mode = "peripheral";
> > +
> > + phys = <&usb_hsphy>;
> > + phy-names = "usb2-phy";
> > };
> >
> > &usb_hsphy {
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index 2505c815c65a..b2ea8f13e827 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -651,6 +651,31 @@ usb_hsphy: phy@1613000 {
> > status = "disabled";
> > };
> >
> > + usb_qmpphy: phy@1615000 {
> > + compatible = "qcom,sm6115-qmp-usb3-phy";
> > + reg = <0x0 0x01615000 0x0 0x200>;
> > +
> > + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> > + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> > + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> > + clock-names = "cfg_ahb",
> > + "ref",
> > + "com_aux",
> > + "pipe";
> > +
> > + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> > + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> > + reset-names = "phy", "phy_phy";
> > +
> > + #clock-cells = <0>;
> > + clock-output-names = "usb3_phy_pipe_clk_src";
> > +
> > + #phy-cells = <0>;
> > +
> > + status = "disabled";
>
>
> Please excuse me if I'm wrong, but this will not work with the current
> PHY driver. It was not updated to handle new bindings. Please provide
> relevant driver patches too.

Oh.. from your previous emails, I got the feeling that you were
already reworking the existing PHY driver as part of enabling it for
newer bindings.

No issues, I will send the PHY patches as well in the next version.

Thanks,
Bhupesh