[PATCH 05/17] iommu/vt-d: Move PRI handling to IOPF feature path

From: Lu Baolu
Date: Tue Apr 11 2023 - 02:49:41 EST


PRI is only used for IOPF. With this move, the PCI/PRI feature could be
controlled by the device driver through iommu_dev_enable/disable_feature()
interfaces.

Reviewed-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230324120234.313643-6-baolu.lu@xxxxxxxxxxxxxxx
---
drivers/iommu/intel/iommu.c | 53 ++++++++++++++++++++++++++++---------
1 file changed, 41 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 6d77b4072fdd..cd3a3c4b5e64 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1415,11 +1415,6 @@ static void iommu_enable_pci_caps(struct device_domain_info *info)
if (info->pasid_supported && !pci_enable_pasid(pdev, info->pasid_supported & ~1))
info->pasid_enabled = 1;

- if (info->pri_supported &&
- (info->pasid_enabled ? pci_prg_resp_pasid_required(pdev) : 1) &&
- !pci_reset_pri(pdev) && !pci_enable_pri(pdev, PRQ_DEPTH))
- info->pri_enabled = 1;
-
if (info->ats_supported && pci_ats_page_aligned(pdev) &&
!pci_enable_ats(pdev, VTD_PAGE_SHIFT)) {
info->ats_enabled = 1;
@@ -1442,11 +1437,6 @@ static void iommu_disable_pci_caps(struct device_domain_info *info)
domain_update_iotlb(info->domain);
}

- if (info->pri_enabled) {
- pci_disable_pri(pdev);
- info->pri_enabled = 0;
- }
-
if (info->pasid_enabled) {
pci_disable_pasid(pdev);
info->pasid_enabled = 0;
@@ -4667,23 +4657,48 @@ static int intel_iommu_enable_sva(struct device *dev)

static int intel_iommu_enable_iopf(struct device *dev)
{
+ struct pci_dev *pdev = dev_is_pci(dev) ? to_pci_dev(dev) : NULL;
struct device_domain_info *info = dev_iommu_priv_get(dev);
struct intel_iommu *iommu;
int ret;

- if (!info || !info->ats_enabled || !info->pri_enabled)
+ if (!pdev || !info || !info->ats_enabled || !info->pri_supported)
return -ENODEV;
+
+ if (info->pri_enabled)
+ return -EBUSY;
+
iommu = info->iommu;
if (!iommu)
return -EINVAL;

+ /* PASID is required in PRG Response Message. */
+ if (info->pasid_enabled && !pci_prg_resp_pasid_required(pdev))
+ return -EINVAL;
+
+ ret = pci_reset_pri(pdev);
+ if (ret)
+ return ret;
+
ret = iopf_queue_add_device(iommu->iopf_queue, dev);
if (ret)
return ret;

ret = iommu_register_device_fault_handler(dev, iommu_queue_iopf, dev);
if (ret)
- iopf_queue_remove_device(iommu->iopf_queue, dev);
+ goto iopf_remove_device;
+
+ ret = pci_enable_pri(pdev, PRQ_DEPTH);
+ if (ret)
+ goto iopf_unregister_handler;
+ info->pri_enabled = 1;
+
+ return 0;
+
+iopf_unregister_handler:
+ iommu_unregister_device_fault_handler(dev);
+iopf_remove_device:
+ iopf_queue_remove_device(iommu->iopf_queue, dev);

return ret;
}
@@ -4694,6 +4709,20 @@ static int intel_iommu_disable_iopf(struct device *dev)
struct intel_iommu *iommu = info->iommu;
int ret;

+ if (!info->pri_enabled)
+ return -EINVAL;
+
+ /*
+ * PCIe spec states that by clearing PRI enable bit, the Page
+ * Request Interface will not issue new page requests, but has
+ * outstanding page requests that have been transmitted or are
+ * queued for transmission. This is supposed to be called after
+ * the device driver has stopped DMA, all PASIDs have been
+ * unbound and the outstanding PRQs have been drained.
+ */
+ pci_disable_pri(to_pci_dev(dev));
+ info->pri_enabled = 0;
+
ret = iommu_unregister_device_fault_handler(dev);
if (ret)
return ret;
--
2.34.1