[PATCH net 2/2] iavf: Fix out-of-bounds when setting channels on remove
From: Ding Hui
Date: Sat Apr 08 2023 - 10:01:49 EST
If we set channels greater when iavf_remove, the waiting reset done
will be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.
[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task test-iavf-1.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: test-iavf-1.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851] dump_stack+0x71/0xab
[ 3510.400860] print_address_description+0x6b/0x290
[ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868] kasan_report+0x14a/0x2b0
[ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891] ? wait_woken+0x1d0/0x1d0
[ 3510.400895] ? notifier_call_chain+0xc1/0x130
[ 3510.400903] pci_device_remove+0xa8/0x1f0
[ 3510.400910] device_release_driver_internal+0x1c6/0x460
[ 3510.400916] pci_stop_bus_device+0x101/0x150
[ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924] pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929] ? pci_get_subsys+0x90/0x90
[ 3510.400932] sriov_disable+0xed/0x3e0
[ 3510.400936] ? bus_find_device+0x12d/0x1a0
[ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968] ? pci_get_device+0x7c/0x90
[ 3510.400970] ? pci_get_subsys+0x90/0x90
[ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001] sriov_numvfs_store+0x214/0x290
[ 3510.401005] ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011] ? __check_object_size+0x15a/0x350
[ 3510.401018] kernfs_fop_write+0x280/0x3f0
[ 3510.401022] vfs_write+0x145/0x440
[ 3510.401025] ksys_write+0xab/0x160
[ 3510.401028] ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031] ? fput_many+0x1a/0x120
[ 3510.401032] ? filp_close+0xf0/0x130
[ 3510.401038] do_syscall_64+0xa0/0x370
[ 3510.401041] ? page_fault+0x8/0x30
[ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0
[ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001
[ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700
[ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001
[ 3510.401090]
[ 3510.401093] Allocated by task 76795:
[ 3510.401098] kasan_kmalloc+0xa6/0xd0
[ 3510.401099] __kmalloc+0xfb/0x200
[ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf]
[ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf]
[ 3510.401114] process_one_work+0x56a/0x11f0
[ 3510.401115] worker_thread+0x8f/0xf40
[ 3510.401117] kthread+0x2a0/0x390
[ 3510.401119] ret_from_fork+0x1f/0x40
[ 3510.401122] 0xffffffffffffffff
[ 3510.401123]
If we detected removing is in processing, we can avoid unnecessary
waiting and return error faster.
On the other hand in timeout handling, we should keep the original
num_active_queues and reset num_req_queues to 0.
Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count")
Signed-off-by: Ding Hui <dinghui@xxxxxxxxxxxxxx>
Cc: Donglin Peng <pengdonglin@xxxxxxxxxxxxxx>
CC: Huang Cun <huangcun@xxxxxxxxxxxxxx>
---
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index 6f171d1d85b7..d8a3c0cfedd0 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -1857,13 +1857,15 @@ static int iavf_set_channels(struct net_device *netdev,
/* wait for the reset is done */
for (i = 0; i < IAVF_RESET_WAIT_COMPLETE_COUNT; i++) {
msleep(IAVF_RESET_WAIT_MS);
+ if (test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section))
+ return -EOPNOTSUPP;
if (adapter->flags & IAVF_FLAG_RESET_PENDING)
continue;
break;
}
if (i == IAVF_RESET_WAIT_COMPLETE_COUNT) {
adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED;
- adapter->num_active_queues = num_req;
+ adapter->num_req_queues = 0;
return -EOPNOTSUPP;
}
--
2.17.1