[PATCH RFC v2 1/4] ARM: dts: oxnas: remove obsolete device tree files

From: Neil Armstrong
Date: Mon Apr 03 2023 - 03:42:34 EST


Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 devices.

Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Acked-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 3 -
arch/arm/boot/dts/ox810se-wd-mbwe.dts | 115 -------
arch/arm/boot/dts/ox810se.dtsi | 357 ---------------------
.../dts/ox820-cloudengines-pogoplug-series-3.dts | 93 ------
arch/arm/boot/dts/ox820.dtsi | 299 -----------------
5 files changed, 867 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846..ad83faecfdc6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1033,9 +1033,6 @@ dtb-$(CONFIG_ARCH_PXA) += \
pxa300-raumfeld-speaker-m.dtb \
pxa300-raumfeld-speaker-one.dtb \
pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
- ox810se-wd-mbwe.dtb \
- ox820-cloudengines-pogoplug-series-3.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8016-sbc.dtb \
qcom-apq8026-asus-sparrow.dtb \
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index c59e06ff2423..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
- model = "Western Digital My Book World Edition";
-
- compatible = "wd,mbwe", "oxsemi,ox810se";
-
- chosen {
- bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
- };
-
- memory {
- /* 128Mbytes DDR */
- reg = <0x48000000 0x8000000>;
- };
-
- aliases {
- serial1 = &uart1;
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- power {
- label = "power";
- gpios = <&gpio0 0 1>;
- linux,code = <0x198>;
- };
-
- recovery {
- label = "recovery";
- gpios = <&gpio0 4 1>;
- linux,code = <0xab>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- a0 {
- label = "activity0";
- gpios = <&gpio0 25 0>;
- default-state = "keep";
- };
-
- a1 {
- label = "activity1";
- gpios = <&gpio0 26 0>;
- default-state = "keep";
- };
-
- a2 {
- label = "activity2";
- gpios = <&gpio0 5 0>;
- default-state = "keep";
- };
-
- a3 {
- label = "activity3";
- gpios = <&gpio0 6 0>;
- default-state = "keep";
- };
-
- a4 {
- label = "activity4";
- gpios = <&gpio0 7 0>;
- default-state = "keep";
- };
-
- a5 {
- label = "activity5";
- gpios = <&gpio1 2 0>;
- default-state = "keep";
- };
- };
-
- i2c-gpio {
- compatible = "i2c-gpio";
- gpios = <&gpio0 3 0 /* sda */
- &gpio0 2 0 /* scl */
- >;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc0: rtc@48 {
- compatible = "st,m41t00";
- reg = <0x68>;
- };
- };
-};
-
-&etha {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 96c0745f7b70..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "oxsemi,ox810se";
-
- cpus {
- #address-cells = <0>;
- #size-cells = <0>;
-
- cpu {
- device_type = "cpu";
- compatible = "arm,arm926ej-s";
- clocks = <&armclk>;
- };
- };
-
- memory {
- device_type = "memory";
- /* Max 256MB @ 0x48000000 */
- reg = <0x48000000 0x10000000>;
- };
-
- clocks {
- osc: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- gmacclk: gmacclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- };
-
- rpsclk: rpsclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&osc>;
- };
-
- pll400: pll400 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <733333333>;
- };
-
- sysclk: sysclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clocks = <&pll400>;
- };
-
- armclk: armclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- clocks = <&pll400>;
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
- interrupt-parent = <&intc>;
-
- etha: ethernet@40400000 {
- compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
- reg = <0x40400000 0x2000>;
- interrupts = <8>;
- interrupt-names = "macirq";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- phy-mode = "rgmii";
-
- clocks = <&stdclk 6>, <&gmacclk>;
- clock-names = "gmac", "stmmaceth";
- resets = <&reset 6>;
-
- /* Regmap for sys registers */
- oxsemi,sys-ctrl = <&sys>;
-
- status = "disabled";
- };
-
- apb-bridge@44000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x44000000 0x1000000>;
-
- pinctrl: pinctrl {
- compatible = "oxsemi,ox810se-pinctrl";
-
- /* Regmap for sys registers */
- oxsemi,sys-ctrl = <&sys>;
-
- pinctrl_uart0: uart0 {
- uart0a {
- pins = "gpio31";
- function = "fct3";
- };
- uart0b {
- pins = "gpio32";
- function = "fct3";
- };
- };
-
- pinctrl_uart0_modem: uart0_modem {
- uart0c {
- pins = "gpio27";
- function = "fct3";
- };
- uart0d {
- pins = "gpio28";
- function = "fct3";
- };
- uart0e {
- pins = "gpio29";
- function = "fct3";
- };
- uart0f {
- pins = "gpio30";
- function = "fct3";
- };
- uart0g {
- pins = "gpio33";
- function = "fct3";
- };
- uart0h {
- pins = "gpio34";
- function = "fct3";
- };
- };
-
- pinctrl_uart1: uart1 {
- uart1a {
- pins = "gpio20";
- function = "fct3";
- };
- uart1b {
- pins = "gpio22";
- function = "fct3";
- };
- };
-
- pinctrl_uart1_modem: uart1_modem {
- uart1c {
- pins = "gpio8";
- function = "fct3";
- };
- uart1d {
- pins = "gpio9";
- function = "fct3";
- };
- uart1e {
- pins = "gpio23";
- function = "fct3";
- };
- uart1f {
- pins = "gpio24";
- function = "fct3";
- };
- uart1g {
- pins = "gpio25";
- function = "fct3";
- };
- uart1h {
- pins = "gpio26";
- function = "fct3";
- };
- };
-
- pinctrl_uart2: uart2 {
- uart2a {
- pins = "gpio6";
- function = "fct3";
- };
- uart2b {
- pins = "gpio7";
- function = "fct3";
- };
- };
-
- pinctrl_uart2_modem: uart2_modem {
- uart2c {
- pins = "gpio0";
- function = "fct3";
- };
- uart2d {
- pins = "gpio1";
- function = "fct3";
- };
- uart2e {
- pins = "gpio2";
- function = "fct3";
- };
- uart2f {
- pins = "gpio3";
- function = "fct3";
- };
- uart2g {
- pins = "gpio4";
- function = "fct3";
- };
- uart2h {
- pins = "gpio5";
- function = "fct3";
- };
- };
- };
-
- gpio0: gpio@0 {
- compatible = "oxsemi,ox810se-gpio";
- reg = <0x000000 0x100000>;
- interrupts = <21>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- ngpios = <32>;
- oxsemi,gpio-bank = <0>;
- gpio-ranges = <&pinctrl 0 0 32>;
- };
-
- gpio1: gpio@100000 {
- compatible = "oxsemi,ox810se-gpio";
- reg = <0x100000 0x100000>;
- interrupts = <22>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- ngpios = <3>;
- oxsemi,gpio-bank = <1>;
- gpio-ranges = <&pinctrl 0 32 3>;
- };
-
- uart0: serial@200000 {
- compatible = "ns16550a";
- reg = <0x200000 0x100000>;
- clocks = <&sysclk>;
- interrupts = <23>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- resets = <&reset RESET_UART1>;
- };
-
- uart1: serial@300000 {
- compatible = "ns16550a";
- reg = <0x300000 0x100000>;
- clocks = <&sysclk>;
- interrupts = <24>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- resets = <&reset RESET_UART2>;
- };
-
- uart2: serial@900000 {
- compatible = "ns16550a";
- reg = <0x900000 0x100000>;
- clocks = <&sysclk>;
- interrupts = <29>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- resets = <&reset RESET_UART3>;
- };
-
- uart3: serial@a00000 {
- compatible = "ns16550a";
- reg = <0xa00000 0x100000>;
- clocks = <&sysclk>;
- interrupts = <30>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- resets = <&reset RESET_UART4>;
- };
- };
-
- apb-bridge@45000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x45000000 0x1000000>;
-
- sys: sys-ctrl@0 {
- compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
- reg = <0x000000 0x100000>;
-
- reset: reset-controller {
- compatible = "oxsemi,ox810se-reset";
- #reset-cells = <1>;
- };
-
- stdclk: stdclk {
- compatible = "oxsemi,ox810se-stdclk";
- #clock-cells = <1>;
- };
- };
-
- rps@300000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x300000 0x100000>;
-
- intc: interrupt-controller@0 {
- compatible = "oxsemi,ox810se-rps-irq";
- interrupt-controller;
- reg = <0 0x200>;
- #interrupt-cells = <1>;
- valid-mask = <0xffffffff>;
- clear-mask = <0xffffffff>;
- };
-
- timer0: timer@200 {
- compatible = "oxsemi,ox810se-rps-timer";
- reg = <0x200 0x40>;
- clocks = <&rpsclk>;
- interrupts = <4 5>;
- };
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
- model = "Cloud Engines PogoPlug Series 3";
-
- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
- chosen {
- bootargs = "earlyprintk";
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- /* 128Mbytes DDR */
- reg = <0x60000000 0x8000000>;
- };
-
- aliases {
- serial0 = &uart0;
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- };
-
- leds {
- compatible = "gpio-leds";
-
- blue {
- label = "pogoplug:blue";
- gpios = <&gpio0 2 0>;
- default-state = "keep";
- };
-
- orange {
- label = "pogoplug:orange";
- gpios = <&gpio1 16 1>;
- default-state = "keep";
- };
-
- green {
- label = "pogoplug:green";
- gpios = <&gpio1 17 1>;
- default-state = "keep";
- };
- };
-};
-
-&uart0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand>;
-
- nand@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- nand-ecc-mode = "soft";
- nand-ecc-algo = "hamming";
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
- read-only;
- };
-
- partition@e00000 {
- label = "ubi";
- reg = <0x00e00000 0x07200000>;
- };
- };
-};
-
-&etha {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index dde4364892bf..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "oxsemi,ox820";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "oxsemi,ox820-smp";
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,arm11mpcore";
- clocks = <&armclk>;
- reg = <0>;
- };
-
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,arm11mpcore";
- clocks = <&armclk>;
- reg = <1>;
- };
- };
-
- memory {
- device_type = "memory";
- /* Max 512MB @ 0x60000000 */
- reg = <0x60000000 0x20000000>;
- };
-
- clocks {
- osc: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- gmacclk: gmacclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- };
-
- sysclk: sysclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clocks = <&osc>;
- };
-
- plla: plla {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <850000000>;
- };
-
- armclk: armclk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <2>;
- clock-mult = <1>;
- clocks = <&plla>;
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
- interrupt-parent = <&gic>;
-
- nandc: nand-controller@41000000 {
- compatible = "oxsemi,ox820-nand";
- reg = <0x41000000 0x100000>;
- clocks = <&stdclk CLK_820_NAND>;
- resets = <&reset RESET_NAND>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- etha: ethernet@40400000 {
- compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
- reg = <0x40400000 0x2000>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_wake_irq";
- mac-address = [000000000000]; /* Filled in by U-Boot */
- phy-mode = "rgmii";
-
- clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
- clock-names = "gmac", "stmmaceth";
- resets = <&reset RESET_MAC>;
-
- /* Regmap for sys registers */
- oxsemi,sys-ctrl = <&sys>;
-
- status = "disabled";
- };
-
- apb-bridge@44000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x44000000 0x1000000>;
-
- pinctrl: pinctrl {
- compatible = "oxsemi,ox820-pinctrl";
-
- /* Regmap for sys registers */
- oxsemi,sys-ctrl = <&sys>;
-
- pinctrl_uart0: uart0 {
- uart0 {
- pins = "gpio30", "gpio31";
- function = "fct5";
- };
- };
-
- pinctrl_uart0_modem: uart0_modem {
- uart0_modem_a {
- pins = "gpio24", "gpio24", "gpio26", "gpio27";
- function = "fct4";
- };
- uart0_modem_b {
- pins = "gpio28", "gpio29";
- function = "fct5";
- };
- };
-
- pinctrl_uart1: uart1 {
- uart1 {
- pins = "gpio7", "gpio8";
- function = "fct4";
- };
- };
-
- pinctrl_uart1_modem: uart1_modem {
- uart1_modem {
- pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
- function = "fct4";
- };
- };
-
- pinctrl_etha_mdio: etha_mdio {
- etha_mdio {
- pins = "gpio3", "gpio4";
- function = "fct1";
- };
- };
-
- pinctrl_nand: nand {
- nand {
- pins = "gpio12", "gpio13", "gpio14", "gpio15",
- "gpio16", "gpio17", "gpio18", "gpio19",
- "gpio20", "gpio21", "gpio22", "gpio23",
- "gpio24";
- function = "fct1";
- };
- };
- };
-
- gpio0: gpio@0 {
- compatible = "oxsemi,ox820-gpio";
- reg = <0x000000 0x100000>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- ngpios = <32>;
- oxsemi,gpio-bank = <0>;
- gpio-ranges = <&pinctrl 0 0 32>;
- };
-
- gpio1: gpio@100000 {
- compatible = "oxsemi,ox820-gpio";
- reg = <0x100000 0x100000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- ngpios = <18>;
- oxsemi,gpio-bank = <1>;
- gpio-ranges = <&pinctrl 0 32 18>;
- };
-
- uart0: serial@200000 {
- compatible = "ns16550a";
- reg = <0x200000 0x100000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- clocks = <&sysclk>;
- resets = <&reset RESET_UART1>;
- };
-
- uart1: serial@300000 {
- compatible = "ns16550a";
- reg = <0x200000 0x100000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <0>;
- fifo-size = <16>;
- reg-io-width = <1>;
- current-speed = <115200>;
- no-loopback-test;
- status = "disabled";
- clocks = <&sysclk>;
- resets = <&reset RESET_UART2>;
- };
-
- rps@400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x400000 0x100000>;
-
- intc: interrupt-controller@0 {
- compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
- interrupt-controller;
- reg = <0 0x200>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <1>;
- valid-mask = <0xffffffff>;
- clear-mask = <0xffffffff>;
- };
-
- timer0: timer@200 {
- compatible = "oxsemi,ox820-rps-timer";
- reg = <0x200 0x40>;
- clocks = <&sysclk>;
- interrupt-parent = <&intc>;
- interrupts = <4>;
- };
- };
-
- sys: sys-ctrl@e00000 {
- compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
- reg = <0xe00000 0x200000>;
-
- reset: reset-controller {
- compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
- #reset-cells = <1>;
- };
-
- stdclk: stdclk {
- compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
- #clock-cells = <1>;
- };
- };
- };
-
- apb-bridge@47000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0x47000000 0x1000000>;
-
- scu: scu@0 {
- compatible = "arm,arm11mp-scu";
- reg = <0x0 0x100>;
- };
-
- local-timer@600 {
- compatible = "arm,arm11mp-twd-timer";
- reg = <0x600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
- clocks = <&armclk>;
- };
-
- gic: interrupt-controller@1000 {
- compatible = "arm,arm11mp-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1000 0x1000>,
- <0x100 0x500>;
- };
- };
- };
-};

--
2.34.1