Re: [PATCH v5 1/2] dt-bindings: i2c: Add support for ASPEED i2Cv2

From: Krzysztof Kozlowski
Date: Mon Feb 20 2023 - 05:44:03 EST


On 20/02/2023 10:50, Ryan Chen wrote:
>> These are common to all i2c controllers, but I see that i2c-controller.yaml
>> doesn't include them (while i2c.text does).
>>
>> I assume we're OK to include these in the device bindings in the meantime.
>> But in that case, you may also want to include the common "smbus-alert"
>> property, which you consume in your driver.
>>
> Since i2c.text have multi-master, smbus-alert. I don't need those two right?

Yes, these should be dropped.

>
>>> +  timeout:
>>> +    type: boolean
>>> +    description: Enable i2c bus timeout for master/slave (35ms)
>>> +
>>> +  byte-mode:
>>> +    type: boolean
>>> +    description: Force i2c driver use byte mode transmit
>>> +
>>> +  buff-mode:
>>> +    type: boolean
>>> +    description: Force i2c driver use buffer mode transmit
>>
>> These three aren't really a property of the hardware, more of the intended
>> driver configuration. Do they really belong in the DT?
>>
> Sorry, I am confused.
> This is hardware controller mode setting for each i2c transfer.
> So I add it in property for change different i2c transfer mode.
> Is my mis-understand the property setting?

You described the property as "Force I2C driver", so it is a not correct
description. DTS is not for controlling driver. You must describe here
hardware feature/property, not driver behavior. Also, it must be clear
for us why this is being customized per each board.

>
>> [and how would a DT author know which modes to choose?]

Exactly.


Best regards,
Krzysztof