Re: [PATCH 1/2] tee: system invocation

[Sumit Garg]

Hi Etienne,

On Mon, 30 Jan 2023 at 15:12, Etienne Carriere
<etienne.carriere@xxxxxxxxxx> wrote:
>
> Adds TEE context flag sys_service to be enabled for invocation contexts
> that should used TEE provisioned system resources. OP-TEE SMC ABI entry

s/used/use/

> rely this information to use a dedicated entry function to request
> allocation of a system thread from a dedicated system context pool.
>
> This feature is needed when a TEE invocation cannot afford to wait for
> a free TEE thread when all TEE threads context are used and suspended
> as these may be suspended waiting for a system service, as an SCMI clock
> or voltage regulator, to be enabled. An example is when OP-TEE invokes
> a Linux OS remove service (RPC) to access an eMMC RPMB partition and

s/remove/remote/

> the eMMC device is supplied by an OP-TEE SCMI regulator.
>
> Signed-off-by: Etienne Carriere <etienne.carriere@xxxxxxxxxx>
> ---
>  drivers/tee/optee/optee_smc.h | 14 +++++++++++---
>  drivers/tee/optee/smc_abi.c   |  6 +++++-
>  include/linux/tee_drv.h       |  4 ++++
>  3 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h
> index 73b5e7760d10..7c7eedf183c5 100644
> --- a/drivers/tee/optee/optee_smc.h
> +++ b/drivers/tee/optee/optee_smc.h
> @@ -108,7 +108,8 @@ struct optee_smc_call_get_os_revision_result {
>   * Call with struct optee_msg_arg as argument
>   *
>   * When called with OPTEE_SMC_CALL_WITH_RPC_ARG or
> - * OPTEE_SMC_CALL_WITH_REGD_ARG in a0 there is one RPC struct optee_msg_arg
> + * OPTEE_SMC_CALL_WITH_REGD_ARG or OPTEE_SMC_FUNCID_CALL_SYSTEM_WITH_REGD_ARG
> + * in a0 there is one RPC struct optee_msg_arg
>   * following after the first struct optee_msg_arg. The RPC struct
>   * optee_msg_arg has reserved space for the number of RPC parameters as
>   * returned by OPTEE_SMC_EXCHANGE_CAPABILITIES.
> @@ -130,8 +131,8 @@ struct optee_smc_call_get_os_revision_result {
>   * a4-6        Not used
>   * a7  Hypervisor Client ID register
>   *
> - * Call register usage, OPTEE_SMC_CALL_WITH_REGD_ARG:
> - * a0  SMC Function ID, OPTEE_SMC_CALL_WITH_REGD_ARG
> + * Call register usage, OPTEE_SMC_CALL_WITH_REGD_ARG and OPTEE_SMC_FUNCID_CALL_SYSTEM_WITH_REGD_ARG:
> + * a0  SMC Function ID, OPTEE_SMC_CALL_WITH_REGD_ARG or OPTEE_SMC_FUNCID_CALL_SYSTEM_WITH_REGD_ARG
>   * a1  Upper 32 bits of a 64-bit shared memory cookie
>   * a2  Lower 32 bits of a 64-bit shared memory cookie
>   * a3  Offset of the struct optee_msg_arg in the shared memory with the
> @@ -175,6 +176,8 @@ struct optee_smc_call_get_os_revision_result {
>         OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_RPC_ARG)
>  #define OPTEE_SMC_CALL_WITH_REGD_ARG \
>         OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG)
> +#define OPTEE_SMC_CALL_SYSTEM_WITH_REGD_ARG \
> +       OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_SYSTEM_WITH_REGD_ARG)
>
>  /*
>   * Get Shared Memory Config
> @@ -254,6 +257,8 @@ struct optee_smc_get_shm_config_result {
>  #define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF          BIT(5)
>  /* Secure world supports pre-allocating RPC arg struct */
>  #define OPTEE_SMC_SEC_CAP_RPC_ARG              BIT(6)
> +/* Secure world provisions thread for system service invocation */
> +#define OPTEE_SMC_SEC_CAP_SYSTEM_THREAD                BIT(7)
>
>  #define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9
>  #define OPTEE_SMC_EXCHANGE_CAPABILITIES \
> @@ -426,6 +431,9 @@ struct optee_smc_disable_shm_cache_result {
>  /* See OPTEE_SMC_CALL_WITH_REGD_ARG above */
>  #define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG    19
>
> +/* See OPTEE_SMC_CALL_SYSTEM_WITH_REGD_ARG above */
> +#define OPTEE_SMC_FUNCID_CALL_SYSTEM_WITH_REGD_ARG     20
> +
>  /*
>   * Resume from RPC (for example after processing a foreign interrupt)
>   *
> diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> index a1c1fa1a9c28..513038a138f6 100644
> --- a/drivers/tee/optee/smc_abi.c
> +++ b/drivers/tee/optee/smc_abi.c
> @@ -889,7 +889,11 @@ static int optee_smc_do_call_with_arg(struct tee_context *ctx,
>         }
>
>         if  (rpc_arg && tee_shm_is_dynamic(shm)) {
> -               param.a0 = OPTEE_SMC_CALL_WITH_REGD_ARG;
> +               if (ctx->sys_service &&
> +                   (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_SYSTEM_THREAD))
> +                       param.a0 = OPTEE_SMC_CALL_SYSTEM_WITH_REGD_ARG;
> +               else
> +                       param.a0 = OPTEE_SMC_CALL_WITH_REGD_ARG;

This system thread flag should also be applicable to platforms without
registered arguments support. IOW, we need similar equivalents for
OPTEE_SMC_FUNCID_CALL_WITH_ARG and OPTEE_SMC_FUNCID_CALL_WITH_RPC_ARG
too. So I would rather suggest that we add following flag to all 3
call types:

#define OPTEE_SMC_CALL_SYSTEM_THREAD_FLAG    0x8000

-Sumit

>                 reg_pair_from_64(&param.a1, &param.a2, (u_long)shm);
>                 param.a3 = offs;
>         } else {
> diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h
> index 17eb1c5205d3..1ff292ba7679 100644
> --- a/include/linux/tee_drv.h
> +++ b/include/linux/tee_drv.h
> @@ -47,6 +47,9 @@ struct tee_shm_pool;
>   *              non-blocking in nature.
>   * @cap_memref_null: flag indicating if the TEE Client support shared
>   *                   memory buffer with a NULL pointer.
> + * @sys_service: flag set by the TEE Client to indicate that it is part of
> + *              a system service and that the TEE may use resources reserved
> + *              for this.
>   */
>  struct tee_context {
>         struct tee_device *teedev;
> @@ -55,6 +58,7 @@ struct tee_context {
>         bool releasing;
>         bool supp_nowait;
>         bool cap_memref_null;
> +       bool sys_service;
>  };
>
>  struct tee_param_memref {
> --
> 2.25.1
>