Re: [PATCH net-next v3 1/2] net: micrel: Add support for lan8841 PHY

[Andrew Lunn]

> +#define LAN8841_MMD_TIMER_REG			0
> +#define LAN8841_MMD0_REGISTER_17		17
> +#define LAN8841_MMD0_REGISTER_17_DROP_OPT(x)	((x) & 0x3)
> +#define LAN8841_MMD0_REGISTER_17_XMIT_TOG_TX_DIS	BIT(3)
> +#define LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG	2
> +#define LAN8841_OPERATION_MODE_STRAP_OVERRIDE_LOW_REG_MAGJACK	BIT(14)
> +#define LAN8841_MMD_ANALOG_REG			28
> +#define LAN8841_ANALOG_CONTROL_1		1
> +#define LAN8841_ANALOG_CONTROL_1_PLL_TRIM(x)	(((x) & 0x3) << 5)
> +#define LAN8841_ANALOG_CONTROL_10		13
> +#define LAN8841_ANALOG_CONTROL_10_PLL_DIV(x)	((x) & 0x3)
> +#define LAN8841_ANALOG_CONTROL_11		14
> +#define LAN8841_ANALOG_CONTROL_11_LDO_REF(x)	(((x) & 0x7) << 12)
> +#define LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT	69
> +#define LAN8841_TX_LOW_I_CH_C_D_POWER_MANAGMENT_VAL 0xbffc
> +#define LAN8841_BTRX_POWER_DOWN			70
> +#define LAN8841_BTRX_POWER_DOWN_QBIAS_CH_A	BIT(0)
> +#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_A	BIT(1)
> +#define LAN8841_BTRX_POWER_DOWN_QBIAS_CH_B	BIT(2)
> +#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_B	BIT(3)
> +#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_C	BIT(5)
> +#define LAN8841_BTRX_POWER_DOWN_BTRX_CH_D	BIT(7)
> +#define LAN8841_ADC_CHANNEL_MASK		198
> +static int lan8841_config_init(struct phy_device *phydev)
> +{
> +	int err;

It would be good to add a blank line before the function.

> +	int ret;

I don't think you need both err and ret. But i expect the compiler is
optimising one of them out anyway.

> +
> +#define LAN8841_OUTPUT_CTRL			25
> +#define LAN8841_OUTPUT_CTRL_INT_BUFFER		BIT(14)
> +static int lan8841_config_intr(struct phy_device *phydev)
> +{

Blank line again, it helpers make the functions stand out.


> +#define LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER 3
> +#define LAN8841_OPERATION_MODE_STRAP_LOW_REGISTER_STRAP_RGMII_EN BIT(0)
> +static int lan8841_probe(struct phy_device *phydev)
> +{
> +	int err;

...

	Andrew