Re: [PATCH V2] arm64: dts: marvell: add DTS for GL.iNet GL-MV1000

From: Pali Rohár
Date: Fri Feb 03 2023 - 12:47:26 EST

On Thursday 02 February 2023 10:37:06 Enrico Mioso wrote:
> The GL-MV1000 (Brume) is a small form-factor gateway router.
> It is based on the Marvell Armada 88F3720 SOC (1GHz), has 3 gigabit ethernet ports, 1 GB RAM, 16M SPI flash, 8GB eMMC and an uSD slot, as well as an USB 2.0 type A and an USB 3.0 type C port.
>
> Signed-off-by: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
> CC: Pali <pali@xxxxxxxxxx>

Looks good,

Reviewed-by: Pali Rohár <pali@xxxxxxxxxx>

> ---
> arch/arm64/boot/dts/marvell/Makefile | 1 +
> .../dts/marvell/armada-3720-gl-mv1000.dts | 239 ++++++++++++++++++
> 2 files changed, 240 insertions(+)
> create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
>
> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
> index 058237681fe5..79ac09b58a89 100644
> --- a/arch/arm64/boot/dts/marvell/Makefile
> +++ b/arch/arm64/boot/dts/marvell/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
> new file mode 100644
> index 000000000000..b1b45b4fa9d4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
> @@ -0,0 +1,239 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "armada-372x.dtsi"
> +
> +/ {
> + model = "GL.iNet GL-MV1000";
> + compatible = "glinet,gl-mv1000", "marvell,armada3720";
> +
> + aliases {
> + led-boot = &led_power;
> + led-failsafe = &led_power;
> + led-running = &led_power;
> + led-upgrade = &led_power;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
> + };
> +
> + vcc_sd_reg1: regulator {
> + compatible = "regulator-gpio";
> + regulator-name = "vcc_sd1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> +
> + gpios-states = <0>;
> + states = <1800000 0x1
> + 3300000 0x0>;
> + enable-active-high;
> + };
> +
> + keys {
> + compatible = "gpio-keys";
> +
> + reset {
> + label = "reset";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + switch {
> + label = "switch";
> + linux,code = <BTN_0>;
> + gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + vpn {
> + label = "green:vpn";
> + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
> + };
> +
> + wan {
> + label = "green:wan";
> + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
> + };
> +
> + led_power: power {
> + label = "green:power";
> + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
> + default-state = "on";
> + };
> + };
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + flash@0 {
> + reg = <0>;
> + compatible = "jedec,spi-nor";
> + spi-max-frequency = <104000000>;
> + m25p,fast-read;
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "firmware";
> + reg = <0 0xf0000>;
> + };
> +
> + partition@f0000 {
> + label = "u-boot-env";
> + reg = <0xf0000 0x8000>;
> + };
> +
> + factory: partition@f8000 {
> + label = "factory";
> + reg = <0xf8000 0x8000>;
> + read-only;
> + };
> +
> + partition@100000 {
> + label = "dtb";
> + reg = <0x100000 0x10000>;
> + read-only;
> + };
> +
> + partition@110000 {
> + label = "rescue";
> + reg = <0x110000 0x1000000>;
> + };
> + };
> + };
> +};
> +
> +&sdhci1 {
> + wp-inverted;
> + bus-width = <4>;
> + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
> + marvell,pad-type = "sd";
> + no-1-8-v;
> + vqmmc-supply = <&vcc_sd_reg1>;
> + status = "okay";
> +};
> +
> +&sdhci0 {
> + bus-width = <8>;
> + mmc-ddr-1_8v;
> + mmc-hs400-1_8v;
> + non-removable;
> + no-sd;
> + no-sdio;
> + marvell,pad-type = "fixed-1-8v";
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&mdio {
> + switch0: switch0@1 {
> + compatible = "marvell,mv88e6085";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + dsa,member = <0 0>;
> +
> + ports: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + label = "cpu";
> + ethernet = <&eth0>;
> + };
> +
> + port@1 {
> + reg = <1>;
> + label = "wan";
> + phy-handle = <&switch0phy0>;
> + };
> +
> + port@2 {
> + reg = <2>;
> + label = "lan0";
> + phy-handle = <&switch0phy1>;
> +
> + nvmem-cells = <&macaddr_factory_6>;
> + nvmem-cell-names = "mac-address";
> + };
> +
> + port@3 {
> + reg = <3>;
> + label = "lan1";
> + phy-handle = <&switch0phy2>;
> +
> + nvmem-cells = <&macaddr_factory_6>;
> + nvmem-cell-names = "mac-address";
> + };
> + };
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + switch0phy0: switch0phy0@11 {
> + reg = <0x11>;
> + };
> + switch0phy1: switch0phy1@12 {
> + reg = <0x12>;
> + };
> + switch0phy2: switch0phy2@13 {
> + reg = <0x13>;
> + };
> + };
> + };
> +};
> +
> +&eth0 {
> + nvmem-cells = <&macaddr_factory_0>;
> + nvmem-cell-names = "mac-address";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> +};
> +
> +&factory {
> + compatible = "nvmem-cells";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + macaddr_factory_0: macaddr@0 {
> + reg = <0x0 0x6>;
> + };
> +
> + macaddr_factory_6: macaddr@6 {
> + reg = <0x6 0x6>;
> + };
> +};
> --
> 2.39.1
>