[PATCH v5 2/8] ARM: dts: at91: sam9x60: move flexcom definitions

[Durai Manickam KR]

From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>

Move the flexcom definitions from board specific DTS file
to the SoC specific DTSI file for sam9x60ek.

Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
[durai.manickamkr@xxxxxxxxxxxxx: Logical split-up of this patch and added
 missing UART5 compatibles]
Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/at91-sam9x60ek.dts | 33 +------------------
 arch/arm/boot/dts/sam9x60.dtsi       | 49 ++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index cf5d786531f2..4ff84633dd43 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -207,15 +207,10 @@ &flx0 {
 	status = "okay";
 
 	i2c0: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
@@ -235,14 +230,8 @@ &flx4 {
 	status = "disabled";
 
 	spi4: spi@400 {
-		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-		clock-names = "spi_clk";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
-		atmel,fifo-size = <16>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
@@ -254,23 +243,8 @@ &flx5 {
 	status = "okay";
 
 	uart5: serial@200 {
-		compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(10))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(11))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-		clock-names = "usart";
-		pinctrl-0 = <&pinctrl_flx5_default>;
 		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
+		pinctrl-0 = <&pinctrl_flx5_default>;
 		status = "okay";
 	};
 };
@@ -280,15 +254,10 @@ &flx6 {
 	status = "okay";
 
 	i2c6: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx6_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 8f5477e307dd..ee6cc4329ae4 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -170,6 +170,16 @@ flx4: flexcom@f0000000 {
 				#size-cells = <1>;
 				ranges = <0x0 0xf0000000 0x800>;
 				status = "disabled";
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx5: flexcom@f0004000 {
@@ -180,6 +190,27 @@ flx5: flexcom@f0004000 {
 				#size-cells = <1>;
 				ranges = <0x0 0xf0004000 0x800>;
 				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					status = "disabled";
+				};
 			};
 
 			dma0: dma-controller@f0008000 {
@@ -379,6 +410,15 @@ flx6: flexcom@f8010000 {
 				#size-cells = <1>;
 				ranges = <0x0 0xf8010000 0x800>;
 				status = "disabled";
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx7: flexcom@f8014000 {
@@ -409,6 +449,15 @@ flx0: flexcom@f801c000 {
 				#size-cells = <1>;
 				ranges = <0x0 0xf801c000 0x800>;
 				status = "disabled";
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx1: flexcom@f8020000 {
-- 
2.25.1