[kernel PATCH v1] Bluetooth: hci_qca: get wakeup status from serdev device handle

[Zhengping Jiang]

Bluetooth controller attached via the UART is handled by the serdev driver.
Get the wakeup status from the device handle through serdev, instead of the
parent path.

Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Signed-off-by: Zhengping Jiang <jiangzp@xxxxxxxxxx>
---

Changes in v1:
- Get wakeup status from device handle of serdev driver

 drivers/bluetooth/hci_qca.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a5c19f32926b..3df8c3606e93 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1588,10 +1588,11 @@ static bool qca_wakeup(struct hci_dev *hdev)
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	bool wakeup;
 
-	/* UART driver handles the interrupt from BT SoC.So we need to use
-	 * device handle of UART driver to get the status of device may wakeup.
+	/* BT SoC attached through the serial bus is handled by the serdev driver.
+	 * So we need to use the device handle of the serdev driver to get the
+	 * status of device may wakeup.
 	 */
-	wakeup = device_may_wakeup(hu->serdev->ctrl->dev.parent);
+	wakeup = device_may_wakeup(&hu->serdev->ctrl->dev);
 	bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
 
 	return wakeup;
-- 
2.39.1.519.gcb327c4b5f-goog