RE: [PATCH v2 3/6] Drivers: hv: vmbus: Convert acpi_device to platform_device

From: Michael Kelley (LINUX)
Date: Wed Feb 01 2023 - 13:32:41 EST

From: Saurabh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx> Sent: Tuesday, January 31, 2023 10:10 AM
>
> Use more generic platform device instead of acpi device. Also rename the
> function vmbus_acpi_remove to more generic name vmbus_mmio_remove.
>
> Signed-off-by: Saurabh Sengar <ssengar@xxxxxxxxxxxxxxxxxxx>
> ---
> drivers/hv/vmbus_drv.c | 78 +++++++++++++++++++++++++-----------------
> 1 file changed, 46 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
> index d24dd65b33d4..49030e756b9f 100644
> --- a/drivers/hv/vmbus_drv.c
> +++ b/drivers/hv/vmbus_drv.c
> @@ -12,6 +12,7 @@
> #include <linux/init.h>
> #include <linux/module.h>
> #include <linux/device.h>
> +#include <linux/platform_device.h>
> #include <linux/interrupt.h>
> #include <linux/sysctl.h>
> #include <linux/slab.h>
> @@ -44,7 +45,7 @@ struct vmbus_dynid {
> struct hv_vmbus_device_id id;
> };
>
> -static struct acpi_device *hv_acpi_dev;
> +static struct platform_device *hv_dev;
>
> static int hyperv_cpuhp_online;
>
> @@ -143,7 +144,7 @@ static DEFINE_MUTEX(hyperv_mmio_lock);
>
> static int vmbus_exists(void)
> {
> - if (hv_acpi_dev == NULL)
> + if (hv_dev == NULL)
> return -ENODEV;
>
> return 0;
> @@ -932,7 +933,7 @@ static int vmbus_dma_configure(struct device *child_device)
> * On x86/x64 coherence is assumed and these calls have no effect.
> */
> hv_setup_dma_ops(child_device,
> - device_get_dma_attr(&hv_acpi_dev->dev) == DEV_DMA_COHERENT);
> + device_get_dma_attr(&hv_dev->dev) == DEV_DMA_COHERENT);
> return 0;
> }
>
> @@ -2090,7 +2091,7 @@ int vmbus_device_register(struct hv_device
> *child_device_obj)
> &child_device_obj->channel->offermsg.offer.if_instance);
>
> child_device_obj->device.bus = &hv_bus;
> - child_device_obj->device.parent = &hv_acpi_dev->dev;
> + child_device_obj->device.parent = &hv_dev->dev;
> child_device_obj->device.release = vmbus_device_release;
>
> child_device_obj->device.dma_parms = &child_device_obj->dma_parms;
> @@ -2262,7 +2263,7 @@ static acpi_status vmbus_walk_resources(struct
> acpi_resource *res, void *ctx)
> return AE_OK;
> }
>
> -static void vmbus_acpi_remove(struct acpi_device *device)
> +static void vmbus_mmio_remove(void)
> {
> struct resource *cur_res;
> struct resource *next_res;
> @@ -2441,13 +2442,15 @@ void vmbus_free_mmio(resource_size_t start,
> resource_size_t size)
> }
> EXPORT_SYMBOL_GPL(vmbus_free_mmio);
>
> -static int vmbus_acpi_add(struct acpi_device *device)
> +static int vmbus_acpi_add(struct platform_device *pdev)
> {
> acpi_status result;
> int ret_val = -ENODEV;
> - struct acpi_device *ancestor;
> + struct platform_device *ancestor;
> + struct acpi_device *adev = to_acpi_device(&pdev->dev);

This doesn't work. The argument to vmbus_acpi_add() is a struct
platform_device, which has a struct device embedded in it (not a
pointer). to_acpi_device() takes a struct device as an argument,
assuming that the struct device is embedded in a struct
acpi_device, which is not the case here. The resulting local
variable adev is actually pointing to some (perhaps negative)
offset within the struct platform_device, and uses of adev are
getting unknown random data from within (or before) the
struct platform_device.

>
> - hv_acpi_dev = device;
> + hv_dev = pdev;
> + adev->fwnode.dev = &pdev->dev;
>
> /*
> * Older versions of Hyper-V for ARM64 fail to include the _CCA
> @@ -2456,15 +2459,16 @@ static int vmbus_acpi_add(struct acpi_device *device)
> * up the ACPI device to behave as if _CCA is present and indicates
> * hardware coherence.
> */
> - ACPI_COMPANION_SET(&device->dev, device);
> + ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pdev->dev));

This statement seems tautological. If ACPI_COMPANION(&pdev->dev)
returns a valid result, why would the ACPI companion for &pdev->dev
need to be set? The original code was setting the ACPI companion for the
embedded struct device to be the struct acpi_device. I forget why this
wasn't already done for the VMBus device when it was originally parsed
from the ACPI DSDT ...

> if (IS_ENABLED(CONFIG_ACPI_CCA_REQUIRED) &&
> - device_get_dma_attr(&device->dev) == DEV_DMA_NOT_SUPPORTED) {
> + device_get_dma_attr(&pdev->dev) == DEV_DMA_NOT_SUPPORTED) {
> + struct acpi_device *adev_node = ACPI_COMPANION(&pdev->dev);

If earlier code in this function can get a correct pointer to the struct acpi_device,
then this statement shouldn't be necessary. You already have it.

> pr_info("No ACPI _CCA found; assuming coherent device I/O\n");
> - device->flags.cca_seen = true;
> - device->flags.coherent_dma = true;
> + adev_node->flags.cca_seen = true;
> + adev_node->flags.coherent_dma = true;
> }
>
> - result = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
> + result = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), METHOD_NAME__CRS,

Again, if you have a correct pointer to the struct acpi_device, then adev->handle
(like the original code) should be simpler than looking it up again with ACPI_HANDLE().

> vmbus_walk_resources, NULL);
>
> if (ACPI_FAILURE(result))
> @@ -2473,9 +2477,9 @@ static int vmbus_acpi_add(struct acpi_device *device)
> * Some ancestor of the vmbus acpi device (Gen1 or Gen2
> * firmware) is the VMOD that has the mmio ranges. Get that.
> */
> - for (ancestor = acpi_dev_parent(device); ancestor;
> - ancestor = acpi_dev_parent(ancestor)) {
> - result = acpi_walk_resources(ancestor->handle, METHOD_NAME__CRS,
> + for (ancestor = to_platform_device(pdev->dev.parent); ancestor;
> + ancestor = to_platform_device(ancestor->dev.parent)) {
> + result = acpi_walk_resources(ACPI_HANDLE(&ancestor->dev), METHOD_NAME__CRS,

Similarly, if you get a correct pointer to the struct acpi_device, does the above
code need any changes? I'm hoping not.

> vmbus_walk_resources, NULL);
>
> if (ACPI_FAILURE(result))
> @@ -2489,10 +2493,21 @@ static int vmbus_acpi_add(struct acpi_device *device)
>
> acpi_walk_err:
> if (ret_val)
> - vmbus_acpi_remove(device);
> + vmbus_mmio_remove();
> return ret_val;
> }
>
> +static int vmbus_platform_driver_probe(struct platform_device *pdev)
> +{
> + return vmbus_acpi_add(pdev);
> +}
> +
> +static int vmbus_platform_driver_remove(struct platform_device *pdev)
> +{
> + vmbus_mmio_remove();
> + return 0;
> +}
> +
> #ifdef CONFIG_PM_SLEEP
> static int vmbus_bus_suspend(struct device *dev)
> {
> @@ -2658,15 +2673,15 @@ static const struct dev_pm_ops vmbus_bus_pm = {
> .restore_noirq = vmbus_bus_resume
> };
>
> -static struct acpi_driver vmbus_acpi_driver = {
> - .name = "vmbus",
> - .ids = vmbus_acpi_device_ids,
> - .ops = {
> - .add = vmbus_acpi_add,
> - .remove = vmbus_acpi_remove,
> - },
> - .drv.pm = &vmbus_bus_pm,
> - .drv.probe_type = PROBE_FORCE_SYNCHRONOUS,
> +static struct platform_driver vmbus_platform_driver = {
> + .probe = vmbus_platform_driver_probe,
> + .remove = vmbus_platform_driver_remove,
> + .driver = {
> + .name = "vmbus",
> + .acpi_match_table = ACPI_PTR(vmbus_acpi_device_ids),
> + .pm = &vmbus_bus_pm,
> + .probe_type = PROBE_FORCE_SYNCHRONOUS,
> + }
> };
>
> static void hv_kexec_handler(void)
> @@ -2750,12 +2765,11 @@ static int __init hv_acpi_init(void)
> /*
> * Get ACPI resources first.
> */
> - ret = acpi_bus_register_driver(&vmbus_acpi_driver);
> -
> + ret = platform_driver_register(&vmbus_platform_driver);
> if (ret)
> return ret;
>
> - if (!hv_acpi_dev) {
> + if (!hv_dev) {
> ret = -ENODEV;
> goto cleanup;
> }
> @@ -2785,8 +2799,8 @@ static int __init hv_acpi_init(void)
> return 0;
>
> cleanup:
> - acpi_bus_unregister_driver(&vmbus_acpi_driver);
> - hv_acpi_dev = NULL;
> + platform_driver_unregister(&vmbus_platform_driver);
> + hv_dev = NULL;
> return ret;
> }
>
> @@ -2839,7 +2853,7 @@ static void __exit vmbus_exit(void)
>
> cpuhp_remove_state(hyperv_cpuhp_online);
> hv_synic_free();
> - acpi_bus_unregister_driver(&vmbus_acpi_driver);
> + platform_driver_unregister(&vmbus_platform_driver);
> }
>
>
> --
> 2.25.1