Re: [PATCH v2] Bluetooth: Fix possible deadlock in rfcomm_sk_state_change

From: Luiz Augusto von Dentz
Date: Fri Jan 06 2023 - 14:45:37 EST


Hi Saeed,

On Thu, Jan 5, 2023 at 5:18 PM Saeed Mahameed <saeed@xxxxxxxxxx> wrote:
>
> On 04 Jan 14:21, Luiz Augusto von Dentz wrote:
> >Hi Ying,
> >
> >On Wed, Jan 4, 2023 at 7:07 AM Ying Hsu <yinghsu@xxxxxxxxxxxx> wrote:
> >>
> >> There's a possible deadlock when two processes are connecting
> >> and closing a RFCOMM socket concurrently. Here's the call trace:
> >
> >Are you sure it is 2 different processes? Usually that would mean 2
> >different sockets (sk) then so they wouldn't share the same lock, so
> >this sounds more like 2 different threads, perhaps it is worth
> >creating a testing case in our rfcomm-tester so we are able to detect
> >this sort of thing in the future.
> >
> >> -> #2 (&d->lock){+.+.}-{3:3}:
> >> __mutex_lock_common kernel/locking/mutex.c:603 [inline]
> >> __mutex_lock0x12f/0x1360 kernel/locking/mutex.c:747
> >> __rfcomm_dlc_close+0x15d/0x890 net/bluetooth/rfcomm/core.c:487
> >> rfcomm_dlc_close+1e9/0x240 net/bluetooth/rfcomm/core.c:520
> >> __rfcomm_sock_close+0x13c/0x250 net/bluetooth/rfcomm/sock.c:220
> >> rfcomm_sock_shutdown+0xd8/0x230 net/bluetooth/rfcomm/sock.c:907
> >> rfcomm_sock_release+0x68/0x140 net/bluetooth/rfcomm/sock.c:928
> >> __sock_release+0xcd/0x280 net/socket.c:650
> >> sock_close+0x1c/0x20 net/socket.c:1365
> >> __fput+0x27c/0xa90 fs/file_table.c:320
> >> task_work_run+0x16f/0x270 kernel/task_work.c:179
> >> exit_task_work include/linux/task_work.h:38 [inline]
> >> do_exit+0xaa8/0x2950 kernel/exit.c:867
> >> do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
> >> get_signal+0x21c3/0x2450 kernel/signal.c:2859
> >> arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
> >> exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
> >> exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
> >> __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
> >> syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
> >> do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
> >> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> >>
> >> -> #1 (rfcomm_mutex){+.+.}-{3:3}:
> >> __mutex_lock_common kernel/locking/mutex.c:603 [inline]
> >> __mutex_lock+0x12f/0x1360 kernel/locking/mutex.c:747
> >> rfcomm_dlc_open+0x93/0xa80 net/bluetooth/rfcomm/core.c:425
> >> rfcomm_sock_connect+0x329/0x450 net/bluetooth/rfcomm/sock.c:413
> >> __sys_connect_file+0x153/0x1a0 net/socket.c:1976
> >> __sys_connect+0x165/0x1a0 net/socket.c:1993
> >> __do_sys_connect net/socket.c:2003 [inline]
> >> __se_sys_connect net/socket.c:2000 [inline]
> >> __x64_sys_connect+0x73/0xb0 net/socket.c:2000
> >> do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> >> do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
> >> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> >>
> >> -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}:
> >> check_prev_add kernel/locking/lockdep.c:3097 [inline]
> >> check_prevs_add kernel/locking/lockdep.c:3216 [inline]
> >> validate_chain kernel/locking/lockdep.c:3831 [inline]
> >> __lock_acquire+0x2a43/0x56d0 kernel/locking/lockdep.c:5055
> >> lock_acquire kernel/locking/lockdep.c:5668 [inline]
> >> lock_acquire+0x1e3/0x630 kernel/locking/lockdep.c:5633
> >> lock_sock_nested+0x3a/0xf0 net/core/sock.c:3470
> >> lock_sock include/net/sock.h:1725 [inline]
> >> rfcomm_sk_state_change+0x6d/0x3a0 net/bluetooth/rfcomm/sock.c:73
> >> __rfcomm_dlc_close+0x1b1/0x890 net/bluetooth/rfcomm/core.c:489
> >> rfcomm_dlc_close+0x1e9/0x240 net/bluetooth/rfcomm/core.c:520
> >> __rfcomm_sock_close+0x13c/0x250 net/bluetooth/rfcomm/sock.c:220
> >> rfcomm_sock_shutdown+0xd8/0x230 net/bluetooth/rfcomm/sock.c:907
> >> rfcomm_sock_release+0x68/0x140 net/bluetooth/rfcomm/sock.c:928
> >> __sock_release+0xcd/0x280 net/socket.c:650
> >> sock_close+0x1c/0x20 net/socket.c:1365
> >> __fput+0x27c/0xa90 fs/file_table.c:320
> >> task_work_run+0x16f/0x270 kernel/task_work.c:179
> >> exit_task_work include/linux/task_work.h:38 [inline]
> >> do_exit+0xaa8/0x2950 kernel/exit.c:867
> >> do_group_exit+0xd4/0x2a0 kernel/exit.c:1012
> >> get_signal+0x21c3/0x2450 kernel/signal.c:2859
> >> arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306
> >> exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
> >> exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
> >> __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
> >> syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
> >> do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
> >> entry_SYSCALL_64_after_hwframe+0x63/0xcd
> >>
> >> Signed-off-by: Ying Hsu <yinghsu@xxxxxxxxxxxx>
> >> ---
> >> This commit has been tested with a C reproducer on qemu-x86_64
> >> and a ChromeOS device.
> >>
> >> Changes in v2:
> >> - Fix potential use-after-free in rfc_comm_sock_connect.
> >>
> >> net/bluetooth/rfcomm/sock.c | 7 ++++++-
> >> 1 file changed, 6 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
> >> index 21e24da4847f..4397e14ff560 100644
> >> --- a/net/bluetooth/rfcomm/sock.c
> >> +++ b/net/bluetooth/rfcomm/sock.c
> >> @@ -391,6 +391,7 @@ static int rfcomm_sock_connect(struct socket *sock, struct sockaddr *addr, int a
> >> addr->sa_family != AF_BLUETOOTH)
> >> return -EINVAL;
> >>
> >> + sock_hold(sk);
> >> lock_sock(sk);
> >>
> >> if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND) {
> >> @@ -410,14 +411,18 @@ static int rfcomm_sock_connect(struct socket *sock, struct sockaddr *addr, int a
> >> d->sec_level = rfcomm_pi(sk)->sec_level;
> >> d->role_switch = rfcomm_pi(sk)->role_switch;
> >>
> >> + /* Drop sock lock to avoid potential deadlock with the RFCOMM lock */
> >> + release_sock(sk);
> >> err = rfcomm_dlc_open(d, &rfcomm_pi(sk)->src, &sa->rc_bdaddr,
> >> sa->rc_channel);
> >> - if (!err)
> >> + lock_sock(sk);
> >> + if (!err && !sock_flag(sk, SOCK_ZAPPED))
> >> err = bt_sock_wait_state(sk, BT_CONNECTED,
> >> sock_sndtimeo(sk, flags & O_NONBLOCK));
> >>
> >> done:
> >> release_sock(sk);
> >> + sock_put(sk);
> >> return err;
> >> }
> >
> >This sounds like a great solution to hold the reference and then
>
> Why do you need sock_hold/put in the same proto_ops.callback sock opts ?
> it should be guaranteed by the caller the sk will remain valid
> or if you are paranoid then sock_hold() on your proto_ops.bind() and put()
> on your proto_ops.release()

It doesn't looks like there is a sock_hold done in the likes of
__sys_connect/__sys_connect_file so afaik it is possible that the sk
is freed in the meantime if we attempt to release and lock afterward,
and about being paranoid I guess we are past that already since with
the likes of fuzzing testing is already paranoid in itself.

> >checking if the socket has been zapped when attempting to lock_sock,
> >so Ive been thinking on generalize this into something like
> >bt_sock_connect(sock, addr, alen, callback) so we make sure the
> >callback is done while holding a reference but with the socket
> >unlocked since typically the underline procedure only needs to access
> >the pi(sk) information without changing it e.g. rfcomm_dlc_open,
> >anyway Im fine if you don't want to pursue doing it right now but I'm
> >afraid these type of locking problem is no restricted to RFCOMM only.
> >
> >> --
> >> 2.39.0.314.g84b9a713c41-goog
> >>
> >
> >
> >--
> >Luiz Augusto von Dentz



--
Luiz Augusto von Dentz