[PATCH V4 0/3] AM68 SK: Add initial support

From: Sinthu Raja
Date: Thu Jan 05 2023 - 10:19:47 EST


From: Sinthu Raja <sinthu.raja@xxxxxx>

Hi All,
Respinning this series after rebasing to 6.2.rc1.
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s AM68 SoC.

Refer below link to AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28

Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Changes in V4:
=============
Repost after rebasing to 6.2 rc1

Changes in V3:
==============
Addressed all the review comments and the changes are captured in separate patches.
- Removed the unused nodes that are disabled by default.
- Updated the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".

V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@xxxxxx/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@xxxxxx/
V3: https://lore.kernel.org/linux-arm-kernel/20221115154832.19759-1-sinthu.raja@xxxxxx/

Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 31 ++
4 files changed, 369 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi

--
2.36.1