Re: [RESEND PATCH v5 0/2] Add LED driver for flash module in QCOM PMICs

From: Lee Jones
Date: Thu Jan 05 2023 - 09:12:13 EST


On Thu, 05 Jan 2023, Fenglin Wu wrote:

> Hi Pavel, Jones,
>
> Can you help to review the new flash LED driver changes for Qcom flash LED
> module when you are available? It's pending for while.
> Thanks

The patches I have in my inbox are from last week.

Please be patient - my backlog is presently very large.

You're 'on the list'.

> On 2022/12/27 16:15, Fenglin Wu wrote:
> > Initial driver and binding document changes for supporting flash LED
> > module in Qualcomm Technologies, Inc. PMICs.
> >
> > Changes in V5:
> > 1. Add MODULE_DEVICE_TABLE for auto-loading.
> >
> > Changes in V4:
> > 1. Added Tested-By tag.
> > 2. Addressed review comments in the binding change and added
> > Reviewed-by tag.
> >
> > Changes in V3:
> > 1. Updated the driver to use regmap_field for register access.
> > 2. Adressed the review comments in binding document change.
> >
> > Changes in V2:
> > 1. Addressed review comments in binding change, thanks Krzysztof!
> > 2. Updated driver to address the compilation issue reported by
> > kernel test robot.
> >
> > Fenglin Wu (2):
> > leds: flash: add driver to support flash LED module in QCOM PMICs
> > dt-bindings: leds: add QCOM flash LED controller
> >
> > .../bindings/leds/qcom,spmi-flash-led.yaml | 116 +++
> > drivers/leds/flash/Kconfig | 15 +
> > drivers/leds/flash/Makefile | 1 +
> > drivers/leds/flash/leds-qcom-flash.c | 701 ++++++++++++++++++
> > 4 files changed, 833 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
> > create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> >

--
Lee Jones [李琼斯]