Re: [PATCH v2 0/5] PM: Fixes for Realtime systems

From: Ulf Hansson
Date: Wed Jan 04 2023 - 10:15:57 EST


On Tue, 20 Dec 2022 at 22:36, Adrien Thierry <athierry@xxxxxxxxxx> wrote:
>
> Hi Krzysztof,
> Thanks for looking into this!
>
> I tested your patchset on the QDrive3 on a CentOS Stream 9 RT kernel (I
> couldn't test it on mainline because the latest RT patchset only supports
> 6.1 which is missing some bits needed to boot QDrive3).
>
> It fixes the PSCI cpuidle issue I was encountering in [1]. However, I may
> have found another code path that triggers a similar issue:
>
> BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
> in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 113, name: kworker/4:2
> preempt_count: 1, expected: 0
> RCU nest depth: 0, expected: 0
> 4 locks held by kworker/4:2/113:
> #0: ffff09b0c2376928 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x1f4/0x7c0
> #1: ffff800008bf3dd0 ((work_completion)(&genpd->power_off_work)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x7c0
> #2: ffff09b0c2e44860 (&genpd->rslock){....}-{2:2}, at: genpd_lock_rawspin+0x20/0x30
> #3: ffff09b0c6696a20 (&dev->power.lock){+.+.}-{2:2}, at: dev_pm_qos_flags+0x2c/0x60
> irq event stamp: 170
> hardirqs last enabled at (169): [<ffffa1be822f8a78>] _raw_spin_unlock_irq+0x48/0xc4
> hardirqs last disabled at (170): [<ffffa1be822f8df4>] _raw_spin_lock_irqsave+0xb0/0xfc
> softirqs last enabled at (0): [<ffffa1be814cfff0>] copy_process+0x68c/0x1500
> softirqs last disabled at (0): [<0000000000000000>] 0x0
> Preemption disabled at:
> [<ffffa1be81d7e620>] genpd_lock_rawspin+0x20/0x30
> CPU: 4 PID: 113 Comm: kworker/4:2 Tainted: G X --------- --- 5.14.0-rt14+ #2
> Hardware name: Qualcomm SA8540 ADP (DT)
> Workqueue: pm genpd_power_off_work_fn
> Call trace:
> dump_backtrace+0xb4/0x12c
> show_stack+0x1c/0x70
> dump_stack_lvl+0x98/0xd0
> dump_stack+0x14/0x2c
> __might_resched+0x180/0x220
> rt_spin_lock+0x74/0x11c
> dev_pm_qos_flags+0x2c/0x60
> genpd_power_off.part.0.isra.0+0xac/0x2d0
> genpd_power_off_work_fn+0x68/0x8c
> process_one_work+0x2b8/0x7c0
> worker_thread+0x15c/0x44c
> kthread+0xf8/0x104
> ret_from_fork+0x10/0x20
>
> This happens consistently during boot. But on the mainline kernel, this
> code path has changed: genpd_power_off no longer calls dev_pm_qos_flags.
> So it might not happen on mainline. I hope to be able to test your
> patchset again soon on mainline with the next version of the RT patchset
> (which should be able to boot the QDrive3).

You are right, since commit 3f9ee7da724a ("PM: domains: Don't check
PM_QOS_FLAG_NO_POWER_OFF in genpd") dev_pm_qos_flags() doesn't get
called in genpd_power_off() anymore. That patch was introduced in
v5.19.
>
> Best,
> Adrien
>
> [1] https://lore.kernel.org/all/20220615203605.1068453-1-athierry@xxxxxxxxxx/
>

Kind regards
Uffe