Re: [PATCH] perf lock: Fix core dump in command perf lock contention

From: Arnaldo Carvalho de Melo
Date: Tue Jan 03 2023 - 13:51:09 EST


Em Tue, Jan 03, 2023 at 08:45:34AM -0800, Namhyung Kim escreveu:
> Hi Arnaldo,
>
> On Mon, Jan 2, 2023 at 7:33 AM Arnaldo Carvalho de Melo <acme@xxxxxxxxxx> wrote:
> >
> > Em Fri, Dec 30, 2022 at 11:26:27AM +0100, Thomas Richter escreveu:
> > > The test case perf lock contention dumps core on s390. Run the following
> > > commands:
> > > # ./perf lock record -- ./perf bench sched messaging
> > > # Running 'sched/messaging' benchmark:
> > > # 20 sender and receiver processes per group
> > > # 10 groups == 400 processes run
> > >
> > > Total time: 2.799 [sec]
> > > [ perf record: Woken up 1 times to write data ]
> > > [ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
> > > #
> > > # ./perf lock contention
> > > Segmentation fault (core dumped)
> > > #
> > >
> > > The function call stack is lengthy, here are the top 5 functions:
> > > # gdb ./perf core.24048
> > > GNU gdb (GDB) Fedora Linux 12.1-6.fc37
> > > Copyright (C) 2022 Free Software Foundation, Inc.
> > > Core was generated by `./perf lock contention'.
> > > Program terminated with signal SIGSEGV, Segmentation fault.
> > > #0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28,
> > > addr=1789230) at util/machine.c:3356
> > > 3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
> > >
> > > (gdb) where
> > > #0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28,\
> > > addr=1789230) at util/machine.c:3356
> > > #1 0x000000000109f244 in callchain_id (evsel=0x30313e0,\
> > > sample=0x3ffea4f77d0) at builtin-lock.c:957
> > > #2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290,\
> > > addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) \
> > > at builtin-lock.c:586
> > > #3 0x000000000109f4d0 in report_lock_contention_begin_event \
> > > (evsel=0x30313e0, sample=0x3ffea4f77d0)
> > > at builtin-lock.c:1004
> > > #4 0x00000000010a00ae in evsel__process_contention_begin \
> > > (evsel=0x30313e0, sample=0x3ffea4f77d0)
> > > at builtin-lock.c:1254
> > > #5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, \
> > > event=0x3ff85601ef8, sample=0x3ffea4f77d0,
> > > evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
> > > sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) \
> > > at util/session.c:1523
> > > .....
> > >
> > > The issue is in function machine__is_lock_function() in file
> > > ./util/machine.c lines 3355:
> > > /* should not fail from here */
> > > sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end",
> > > &kmap);
> > > machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
> > >
> > > On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
> > > resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
> > > access and generates the core dump.
> > >
> > > The reason why __sched_text_end is not in the symbol list on s390 is
> > > simple:
> > > When the symbol list is created at perf start up with function calls
> > > dso__load
> > > +--> dso__load_vmlinux_path
> > > +--> dso__load_vmlinux
> > > +--> dso__load_sym
> > > +--> dso__load_sym_internal (reads kernel symbols)
> > > +--> symbols__fixup_end
> > > +--> symbols__fixup_duplicate
> > >
> > > The issue is in function symbols__fixup_duplicate(). It deletes all
> > > symbols with have the same address. On s390
> > > # nm -g ~/linux/vmlinux| fgrep c68390
> > > 0000000000c68390 T __cpuidle_text_start
> > > 0000000000c68390 T __sched_text_end
> > > #
> > > two symbols have identical addresses and __sched_text_end is considered
> > > duplicate (in ascending sort order) and removed from the symbol list.
> > > Therefore it is missing and an invalid pointer reference occurs.
> > > The code checks for symbol __sched_text_start and when it exists assumes
> > > symbol __sched_text_end is also in the symbol table. However this is
> > > not the case on s390.
> > >
> > > Same situation exists for symbol __lock_text_start:
> > > 0000000000c68770 T __cpuidle_text_end
> > > 0000000000c68770 T __lock_text_start
> > > This symbol is also removed from the symbol table but used in function
> > > machine__is_lock_function().
> > >
> > > To fix this and keep duplicate symbols in the symbol table, set
> > > symbol_conf.allow_aliases to true. This prevents the removal of duplicate
> > > symbols in function symbols__fixup_duplicate().
> > >
> > > Output After:
> > > # ./perf lock contention
> > > contended total wait max wait avg wait type caller
> > >
> > > 48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
> > > 47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
> > > 5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
> > > 4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
> > > #
> > >
> > > Fixes: cc2367eebb0c ("machine: Adopt is_lock_function() from builtin-lock.c")
> >
> > Humm, is that really the cset that introduces the problem? It just moves
> > things around, the cset that introduced the is_lock_function() function,
> > that assumed that __sched_text_end was always available was:
> >
> > commit 0d2997f750d1de394231bc22768dab94a5b5db2f
> > Author: Namhyung Kim <namhyung@xxxxxxxxxx>
> > Date: Wed Jun 15 09:32:22 2022 -0700
> >
> > perf lock: Look up callchain for the contended locks
> >
> > ---
> >
> > Right? Namhyung? Can you spot any problem in enabling duplicates as a
> > fix?
>
> Yep, I think that's the cset introduced the problem.
> I'm fine with the fix.
>
> Acked-by: Namhyung Kim <namhyung@xxxxxxxxxx>

Thanks, applied.

- Arnaldo