[PATCH AUTOSEL 6.1 21/26] xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage

From: Sasha Levin
Date: Fri Dec 23 2022 - 20:32:37 EST


From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>

[ Upstream commit c3bbacd61baace2f4fbab17012c3d149df2d50f1 ]

Disable U3 suspended ports in hibernate S4 poweroff_late for systems
with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled.

This reduces the number of self-powered usb devices from surviving in
U3 suspended state into next reboot.

Bootloader/firmware on these systems can't handle usb ports in U3, and
will timeout, causing extra delay during reboot/restore from S4.

Add pci_poweroff_late() callback to struct usb_hcd to get this done at
the correct stage in hibernate.

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/usb/core/hcd-pci.c | 13 ++++++++++
drivers/usb/host/xhci-pci.c | 52 +++++++++++++++++++++++++++++++++++++
include/linux/usb/hcd.h | 3 +++
3 files changed, 68 insertions(+)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 9b77f49b3560..ab2f3737764e 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -558,6 +558,17 @@ static int hcd_pci_suspend_noirq(struct device *dev)
return retval;
}

+static int hcd_pci_poweroff_late(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+
+ if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
+ return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
+
+ return 0;
+}
+
static int hcd_pci_resume_noirq(struct device *dev)
{
powermac_set_asic(to_pci_dev(dev), 1);
@@ -578,6 +589,7 @@ static int hcd_pci_restore(struct device *dev)

#define hcd_pci_suspend NULL
#define hcd_pci_suspend_noirq NULL
+#define hcd_pci_poweroff_late NULL
#define hcd_pci_resume_noirq NULL
#define hcd_pci_resume NULL
#define hcd_pci_restore NULL
@@ -615,6 +627,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.thaw_noirq = NULL,
.thaw = hcd_pci_resume,
.poweroff = hcd_pci_suspend,
+ .poweroff_late = hcd_pci_poweroff_late,
.poweroff_noirq = hcd_pci_suspend_noirq,
.restore_noirq = hcd_pci_resume_noirq,
.restore = hcd_pci_restore,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7bccbe50bab1..f8100aa2f5d0 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -620,6 +620,57 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
return retval;
}

+static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_port *port;
+ struct usb_device *udev;
+ unsigned int slot_id;
+ u32 portsc;
+ int i;
+
+ /*
+ * Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
+ * cause significant boot delay if usb ports are in suspended U3 state
+ * during boot. Some USB devices survive in U3 state over S4 hibernate
+ *
+ * Disable ports that are in U3 if remote wake is not enabled for either
+ * host controller or connected device
+ */
+
+ if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
+ return 0;
+
+ for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+ port = &xhci->hw_ports[i];
+ portsc = readl(port->addr);
+
+ if ((portsc & PORT_PLS_MASK) != XDEV_U3)
+ continue;
+
+ slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
+ port->hcd_portnum + 1);
+ if (!slot_id || !xhci->devs[slot_id]) {
+ xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
+ slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+ continue;
+ }
+
+ udev = xhci->devs[slot_id]->udev;
+
+ /* if wakeup is enabled then don't disable the port */
+ if (udev->do_remote_wakeup && do_wakeup)
+ continue;
+
+ xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
+ port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+ portsc = xhci_port_state_to_neutral(portsc);
+ writel(portsc | PORT_PE, port->addr);
+ }
+
+ return 0;
+}
+
static void xhci_pci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -686,6 +737,7 @@ static int __init xhci_pci_init(void)
#ifdef CONFIG_PM
xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+ xhci_pci_hc_driver.pci_poweroff_late = xhci_pci_poweroff_late;
xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
#endif
return pci_register_driver(&xhci_pci_driver);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 78cd566ee238..b51c07111729 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -269,6 +269,9 @@ struct hc_driver {
/* called after entering D0 (etc), before resuming the hub */
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);

+ /* called just before hibernate final D3 state, allows host to poweroff parts */
+ int (*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup);
+
/* cleanly make HCD stop writing memory and doing I/O */
void (*stop) (struct usb_hcd *hcd);

--
2.35.1