Re: [PATCH v4 00/16] Qcom: LLCC/EDAC: Fix base address used for LLCC banks

[Andrew Halaney]

On Thu, Dec 22, 2022 at 06:46:40PM +0530, Manivannan Sadhasivam wrote:
> The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
> accessing the (Control and Status Regsiters) CSRs of each LLCC bank.
> This offset only works for some SoCs like SDM845 for which driver support
> was initially added.
>     
> But the later SoCs use different register stride that vary between the
> banks with holes in-between. So it is not possible to use a single register
> stride for accessing the CSRs of each bank. By doing so could result in a
> crash with the current drivers. So far this crash is not reported since
> EDAC_QCOM driver is not enabled in ARM64 defconfig and no one tested the
> driver extensively by triggering the EDAC IRQ (that's where each bank
> CSRs are accessed).
>     
> For fixing this issue, let's obtain the base address of each LLCC bank from
> devicetree and get rid of the fixed stride.
> 
> This series affects multiple platforms but I have only tested this on
> SM8250, SM8450, and SM6350. Testing on other platforms is welcomed.
> 
> Thanks,
> Mani

Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sa8540p-ride

With this series applied:
  1. The module loads automatically
  2. I get the edac driver setup in interrupt mode
  3. unloading/loading the module repeatedly works without issue

Thanks Mani!

> 
> Changes in v4:
> 
> * Added a patch that fixes the use-after-free bug in qcom_edac driver
> 
> Changes in v3:
> 
> * Brought back reg-names property for compatibility (Krzysztof)
> * Removed Fixes tag and stable list as backporting the drivers/binding/dts
>   patches alone would break (Krzysztof)
> * Fixed the uninitialized variable issue (Kbot)
> * Added a patch to make use of driver supplied polling interval (Luca)
> * Added a patch for module autoloading (Andrew)
> * Didn't collect Review tags from Sai as the dts patches were changed.
> 
> Changes in v2:
> 
> * Removed reg-names property and used index of reg property to parse LLCC
>   bank base address (Bjorn)
> * Collected Ack from Sai for binding
> * Added a new patch for polling mode (Luca)
> * Renamed subject of patches targeting SC7180 and SM6350
> 
> Manivannan Sadhasivam (16):
>   dt-bindings: arm: msm: Update the maintainers for LLCC
>   dt-bindings: arm: msm: Fix register regions used for LLCC banks
>   arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sc7180: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sc7280: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sc8280xp: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sm8150: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sm8250: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sm8350: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sm8450: Fix the base addresses of LLCC banks
>   arm64: dts: qcom: sm6350: Fix the base addresses of LLCC banks
>   EDAC/device: Make use of poll_msec value in edac_device_ctl_info
>     struct
>   EDAC/qcom: Add platform_device_id table for module autoloading
>   EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's
>     pvt_info
>   qcom: llcc/edac: Fix the base address used for accessing LLCC banks
>   qcom: llcc/edac: Support polling mode for ECC handling
> 
>  .../bindings/arm/msm/qcom,llcc.yaml           | 128 ++++++++++++++++--
>  arch/arm64/boot/dts/qcom/sc7180.dtsi          |   2 +-
>  arch/arm64/boot/dts/qcom/sc7280.dtsi          |   5 +-
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  10 +-
>  arch/arm64/boot/dts/qcom/sdm845.dtsi          |   7 +-
>  arch/arm64/boot/dts/qcom/sm6350.dtsi          |   2 +-
>  arch/arm64/boot/dts/qcom/sm8150.dtsi          |   7 +-
>  arch/arm64/boot/dts/qcom/sm8250.dtsi          |   7 +-
>  arch/arm64/boot/dts/qcom/sm8350.dtsi          |   7 +-
>  arch/arm64/boot/dts/qcom/sm8450.dtsi          |   7 +-
>  drivers/edac/edac_device.c                    |   2 +-
>  drivers/edac/qcom_edac.c                      |  63 +++++----
>  drivers/soc/qcom/llcc-qcom.c                  |  85 ++++++------
>  include/linux/soc/qcom/llcc-qcom.h            |   6 +-
>  14 files changed, 243 insertions(+), 95 deletions(-)
> 
> -- 
> 2.25.1
>