Re: [PATCH v4 0/8] add support MDP3 on MT8195 platform

From: Matthias Brugger
Date: Tue Dec 20 2022 - 09:55:12 EST


Hi Moudy,

On 20/12/2022 04:40, Moudy Ho (何宗原) wrote:
On Tue, 2022-12-20 at 10:14 +0800, moudy ho wrote:
On Mon, 2022-12-19 at 16:17 +0100, Matthias Brugger wrote:

On 16/12/2022 13:33, Matthias Brugger wrote:

Whole series applied, thanks!


And now, whole series reverted, please see comment in 1/8.

Regards,
Matthias


Hi Matthias,

May I send a new series without a fallback compatible like the mt8188
VDOSYS does?


https://patchwork.kernel.org/project/linux-mediatek/patch/20221206020046.11333-3-nathan.lu@xxxxxxxxxxxx/

Regards,
Moudy

Hi Matthias,

Sorry for the inaccurate information, the warning mentioned in [1/8] is
because vppsys 0/1 has already been defined in "mediatek,mt8195-
clock.yaml" as follows:

https://patchwork.kernel.org/project/linux-mediatek/patch/20210914021633.26377-2-chun-jie.chen@xxxxxxxxxxxx/

Is it possible to fix it by just removing [1/8], or should I send a new
series?


You will need to remove it from the clock binding and of course from the clock drivers. One example is this one:
https://patchwork.kernel.org/project/linux-mediatek/patch/20210914021633.26377-21-chun-jie.chen@xxxxxxxxxxxx/

In the end the mmsys will probe by the compatible and will then probe the clock driver as a platform driver.

Best regards,
Matthias


Regards,
Moudy

On 07/12/2022 10:49, Moudy Ho wrote:
From: mtk18742 <moudy.ho@xxxxxxxxxxxx>

Changes since v3:
- Rebase on linux-next

Changes since v2:
- Depend on :
[1]

https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=681097__;!!CTRNKA9wMg0ARbw!giZVy8TiFNylgWKOjI75fSmleN6UlckPuiXzFf5jbdVgFbHdIxG3d3Jvkqp7Eka73I2TmataD_d5QjzBnk6-sYY$
- Split dts settings into two patches based on belonging to
MMSYS
or MUTEX.

Changes since v1:
- Depend on :
[1]

https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=681097__;!!CTRNKA9wMg0ARbw!giZVy8TiFNylgWKOjI75fSmleN6UlckPuiXzFf5jbdVgFbHdIxG3d3Jvkqp7Eka73I2TmataD_d5QjzBnk6-sYY$
- Add compatible names to VPPSYS0 and VPPSYS1 in MMSYS binding
file.
- Fix VPPSYS's MMSYS and MUTEX dts to pass the dtsb_check.
- Rename mtk_mmsys_merge_config() and
mtk_mmsys_rsz_dcm_config()
to
mtk_mmsys_vpp_rsz_merge_config() and
mtk_mmsys_vpp_rsz_dcm_config().
- Clean up mtk_mmsys_vpp_rsz_dcm_config().
- Add a comment to mtk_mutex_write_mod() and clean it up for
use
in more
than 32 mods.

Hi,

This series add support for MT8195's two VPPSYS(Video Processor
Pipe Subsystem),
under which there will be corresponding MMSYS and MUTEX
settings
that
need to be configured.

Moudy Ho (2):
dt-bindings: arm: mediatek: mmsys: Add support for MT8195
VPPSYS
arm64: dts: mediatek: mt8195: add MUTEX configuration for
VPPSYS

Roy-CW.Yeh (6):
dt-bindings: soc: mediatek: Add support for MT8195 VPPSYS
arm64: dts: mediatek: mt8195: add MMSYS configuration for
VPPSYS
soc: mediatek: mmsys: add support for MT8195 VPPSYS
soc: mediatek: mmsys: add config api for RSZ switching and
DCM
soc: mediatek: mutex: Add mtk_mutex_set_mod support to set
MOD1
soc: mediatek: mutex: support MT8195 VPPSYS

.../bindings/arm/mediatek/mediatek,mmsys.yaml | 5 +-
.../bindings/soc/mediatek/mediatek,mutex.yaml | 1 +
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 28 +++-
drivers/soc/mediatek/mt8195-mmsys.h | 13 ++
drivers/soc/mediatek/mtk-mmsys.c | 64 +++++++++
drivers/soc/mediatek/mtk-mmsys.h | 1 +
drivers/soc/mediatek/mtk-mutex.c | 135
+++++++++++++++++-
include/linux/soc/mediatek/mtk-mmsys.h | 4 +
include/linux/soc/mediatek/mtk-mutex.h | 35 +++++
9 files changed, 274 insertions(+), 12 deletions(-)