Re: [PATCH v3 00/17] dt-bindings: soc: Introduce UniPhier miscellaneous register blocks and fix examples

[Kunihiko Hayashi]

Hi Rob,

On 2022/12/20 0:49, Rob Herring wrote:
> On Tue, Dec 13, 2022 at 05:24:32PM +0900, Kunihiko Hayashi wrote:
> > This series introduces dt-bindings documents for miscellaneous register
> > blocks implemented in Socionext UniPhier SoCs.
> >
> > These are previously defined in the devicetree and used in the examples
> > of subnodes' dt-bindings, however, not documented.
> >
> > These include two types of the blocks
> >
> > * independent block including miscellaneous registers and functions for
> >    the whole SoC (system controller and SoC-glue logic)
> >
> > * sideband logic including control registers in the component (others)
> >
> > And prior to adding these dt-bindings, fix examples in the existing
> > dt-bindings.
> >
> > This series is part of the previous series shown below:
> https://lore.kernel.org/linux-arm-kernel/20221107103410.3443-2-hayashi.kun
> ihiko@xxxxxxxxxxxxx
> > Changes since v2:
> > - Drop redundant nodes in examples (clock, reset, soc-glue-debug)
> > - Drop parent node in examples
> > - Add more properties to examples for pinctrl
> > - Add a patch for regulator change
> > - Use consistent quotes
> > - Drop unit address patterns of patternProperties
> > - Mandatory unit address pattern for efuse (soc-glue-debug)
> > - Fix additionalProperties (ahci-glue)
> >
> > Changes since v1:
> > - Fix examples in the existing dt-bindings (Add PATCH 1-7)
> > - Add dt-bindings for SoC-glue logic debug part (Add PATCH 10)
> > - Drop generic and ld6b compatible strings
> > - Change "usb-controller" node in soc-glue to "usb-hub"
> > - Change "usb-controller" node in USB glue layer example to "usb"
> > - Add negation of child properties by compatible string
> >
> > Kunihiko Hayashi (17):
> >    dt-bindings: clock: Fix node descriptions in uniphier-clock example
> >    dt-bindings: reset: Fix node descriptions in uniphier-reset example
> >    dt-bindings: pinctrl: Fix node descriptions in uniphier-pinctrl
> >      example
> >    dt-bindings: regulator: Fix node descriptions in uniphier-regulator
> >      example
> >    dt-bindings: watchdog: Fix node descriptions in uniphier-wdt example
> >    dt-bindings: thermal: Fix node descriptions in uniphier-thermal
> >      example
> >    dt-bindings: phy: Fix node descriptions in uniphier-phy example
> >    dt-bindings: nvmem: Fix node descriptions in uniphier-efuse example
> >    dt-bindings: soc: socionext: Add UniPhier system controller
> >    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic
> >    dt-bindings: soc: socionext: Add UniPhier SoC-glue logic debug part
> >    dt-bindings: soc: socionext: Add UniPhier peripheral block
> >    dt-bindings: soc: socionext: Add UniPhier media I/O block
> >    dt-bindings: soc: socionext: Add UniPhier SD interface block
> >    dt-bindings: soc: socionext: Add UniPhier ADAMV block
> >    dt-bindings: soc: socionext: Add UniPhier DWC3 USB glue layer
> >    dt-bindings: soc: socionext: Add UniPhier AHCI glue layer
>
> You sent this To me, so I'm assuming you want me to apply it?
> Otherwise, it can go via the Socionext tree. Let me know and I can fix
> up Krzysztof's comments and apply the series.

Currently I don't have the Socionext tree for pull-request,
so I'd be happy if you could fix up the comments and apply the series.

Thank you,

---
Best Regards
Kunihiko Hayashi