[PATCH 2/3] can: esd_usb: Improved behavior on esd CAN_ERROR_EXT event (2)

From: Frank Jungclaus
Date: Mon Dec 19 2022 - 16:27:58 EST


Started a rework initiated by Vincents remarks "You should not report
the greatest of txerr and rxerr but the one which actually increased."
[1] and "As far as I understand, those flags should be set only when
the threshold is *reached*" [2] .

Now setting the flags for CAN_ERR_CRTL_[RT]X_WARNING and
CAN_ERR_CRTL_[RT]X_PASSIVE regarding REC and TEC, when the
appropriate threshold is reached.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
Link: [1] https://lore.kernel.org/all/CAMZ6RqKGBWe15aMkf8-QLf-cOQg99GQBebSm+1wEzTqHgvmNuw@xxxxxxxxxxxxxx/
Link: [2] https://lore.kernel.org/all/CAMZ6Rq+QBO1yTX_o6GV0yhdBj-RzZSRGWDZBS0fs7zbSTy4hmA@xxxxxxxxxxxxxx/
---
drivers/net/can/usb/esd_usb.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 5e182fadd875..09745751f168 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -255,10 +255,18 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
can_bus_off(priv->netdev);
break;
case ESD_BUSSTATE_WARN:
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
priv->can.state = CAN_STATE_ERROR_WARNING;
priv->can.can_stats.error_warning++;
break;
case ESD_BUSSTATE_ERRPASSIVE:
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_PASSIVE :
+ CAN_ERR_CRTL_RX_PASSIVE;
priv->can.state = CAN_STATE_ERROR_PASSIVE;
priv->can.can_stats.error_passive++;
break;
@@ -296,12 +304,6 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
/* Bit stream position in CAN frame as the error was detected */
cf->data[3] = ecc & SJA1000_ECC_SEG;

- if (priv->can.state == CAN_STATE_ERROR_WARNING ||
- priv->can.state == CAN_STATE_ERROR_PASSIVE) {
- cf->data[1] = (txerr > rxerr) ?
- CAN_ERR_CRTL_TX_PASSIVE :
- CAN_ERR_CRTL_RX_PASSIVE;
- }
cf->data[6] = txerr;
cf->data[7] = rxerr;
}
--
2.25.1