[PATCH v2 1/2] usb: dwc2: allow platforms to prevent core phy initialisation

[Quentin Schulz]

From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>

Some USB PHYs need to be controlled dynamically on some platforms.

Let's allow platforms to define whether they should prevent core PHY
initialization by providing a "shadow" value to HCD's
skip_phy_initialization flag before HCD is actually created (e.g. from
a dwc2_set_*_params callback).

Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/dwc2/core.h | 6 ++++++
 drivers/usb/dwc2/hcd.c  | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 40cf2880d7e5..6aa9aeb374eb 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -423,6 +423,10 @@ enum dwc2_ep0_state {
  *                      0 - No
  *                      1 - Yes
  *
+ * @hcd_skip_phy_initialization: Shadow value of HCD skip_phy_initialization
+ *				 flag.
+ *				 See include/linux/usb/hcd.h for documentation.
+ *
  * The following parameters may be specified when starting the module. These
  * parameters define how the DWC_otg controller should be configured. A
  * value of -1 (or any other out of range value) for any parameter means
@@ -499,6 +503,8 @@ struct dwc2_core_params {
 	u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
 
 	bool change_speed_quirk;
+
+	unsigned hcd_skip_phy_initialization:1;
 };
 
 /**
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 657f1f659ffa..e2fa9a491cab 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5315,6 +5315,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
 	if (!IS_ERR_OR_NULL(hsotg->uphy))
 		otg_set_host(hsotg->uphy->otg, &hcd->self);
 
+	hcd->skip_phy_initialization = hsotg->params.hcd_skip_phy_initialization;
+
 	/*
 	 * Finish generic HCD initialization and start the HCD. This function
 	 * allocates the DMA buffer pool, registers the USB bus, requests the

-- 
2.38.1