[PATCH v2 00/15] Add support for enhanced SPI for Designware SPI controllers

[Sudip Mukherjee]

The is v2 of the patch series adding enhanced SPI support. Some Synopsys SSI
controllers support enhanced SPI which includes Dual mode, Quad mode and
Octal mode. DWC_ssi includes clock stretching feature in enhanced SPI modes
which can be used to prevent FIFO underflow and overflow conditions while
transmitting or receiving the data respectively.

This is almost a complete rework based on the review from Serge.


-- 
Regards
Sudip

Sudip Mukherjee (15):
  spi: dw: Introduce spi_frf and STD_SPI
  spi: dw: update NDF while using enhanced spi mode
  spi: dw: update SPI_CTRLR0 register
  spi: dw: add check for support of enhanced spi
  spi: dw: Introduce enhanced mem_op
  spi: dw: Introduce dual/quad/octal spi
  spi: dw: send cmd and addr to start the spi transfer
  spi: dw: update irq setup to use multiple handler
  spi: dw: use irq handler for enhanced spi
  spi: dw: Calculate Receive FIFO Threshold Level
  spi: dw: adjust size of mem_op
  spi: dw: Add retry for enhanced spi mode
  spi: dw: detect enhanced spi mode
  spi: dt-bindings: snps,dw-ahb-ssi: Add generic dw-ahb-ssi version
  spi: dw: initialize dwc-ssi controller

 .../bindings/spi/snps,dw-apb-ssi.yaml         |   1 +
 drivers/spi/spi-dw-core.c                     | 347 +++++++++++++++++-
 drivers/spi/spi-dw-mmio.c                     |   1 +
 drivers/spi/spi-dw.h                          |  27 ++
 4 files changed, 364 insertions(+), 12 deletions(-)

-- 
2.30.2