Re: [PATCH 3/3] spi: dw: Write chip configuration before cs is set

[Serge Semin]

On Fri, Dec 02, 2022 at 10:49:34AM +0100, Edmund Berenson wrote:
> Using chips with different cpol, causes first communication
> to fail on cpol change.
> To avoid this issue write cr0 register before cs is set.

I need more details on the problem otherwise this patch seems more
like a hack than a fix. The dw_spi_update_config() method already
updates the mode before start to execute each SPI-transfer.  Basically
what you suggest here is the double CR0 register update before the
first transfer submission. This doesn't seem like a proper solution.
Moreover updating the device setting in the set_cs callback makes it
less coherent. So there must be a firm justification why the update is
supposed to be done in the dw_spi_set_cs method.

> 
> Suggested-by: Lukasz Zemla <Lukasz.Zemla@xxxxxxxxxxxx>
> Signed-off-by: Edmund Berenson <edmund.berenson@xxxxxxxxx>
> ---
>  drivers/spi/spi-dw-core.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index 57c9e384d6d4..c3da4fe3e510 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -93,6 +93,7 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
>  void dw_spi_set_cs(struct spi_device *spi, bool enable)
>  {
>  	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
> +	struct dw_spi_chip_data *chip = spi_get_ctldata(spi);
>  	bool cs_high = !!(spi->mode & SPI_CS_HIGH);
>  	u8 enable_cs = 0;
>  
> @@ -106,8 +107,13 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
>  	 * Enable register no matter whether the SPI core is configured to
>  	 * support active-high or active-low CS level.
>  	 */
> -	if (cs_high == enable)
> +	if (cs_high == enable) {
> +		dw_spi_enable_chip(dws, 0);
> +		dw_writel(dws, DW_SPI_CTRLR0, chip->cr0);
> +		dw_spi_enable_chip(dws, 1);
> +
>  		dw_writel(dws, DW_SPI_SER, BIT(enable_cs));

> +	}
>  	else

Documentation/process/coding-style.rst: 3) Placing Braces and Spaces

-Sergey

>  		dw_writel(dws, DW_SPI_SER, 0);
>  }
> -- 
> 2.37.4
>