Re: [PATCH 1/5] drm/rockchip: rgb: embed drm_encoder into rockchip_encoder

From: Sascha Hauer
Date: Wed Dec 07 2022 - 01:45:51 EST


On Wed, Nov 30, 2022 at 03:02:13PM +0100, Michael Riesch wrote:
> Commit 540b8f271e53 ("drm/rockchip: Embed drm_encoder into
> rockchip_decoder") provides the means to pass the endpoint ID to the
> VOP2 driver, which sets the interface MUX accordingly. However, this
> step has not yet been carried out for the RGB output block. Embed the
> drm_encoder structure into the rockchip_encoder structure and set the
> endpoint ID correctly.
>
> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/rockchip/rockchip_rgb.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_rgb.c b/drivers/gpu/drm/rockchip/rockchip_rgb.c
> index 75eb7cca3d82..16201a5cf1e8 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_rgb.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_rgb.c
> @@ -18,17 +18,17 @@
> #include <drm/drm_probe_helper.h>
> #include <drm/drm_simple_kms_helper.h>
>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +
> #include "rockchip_drm_drv.h"
> #include "rockchip_drm_vop.h"
> #include "rockchip_rgb.h"
>
> -#define encoder_to_rgb(c) container_of(c, struct rockchip_rgb, encoder)
> -
> struct rockchip_rgb {
> struct device *dev;
> struct drm_device *drm_dev;
> struct drm_bridge *bridge;
> - struct drm_encoder encoder;
> + struct rockchip_encoder encoder;
> struct drm_connector connector;
> int output_mode;
> };
> @@ -125,7 +125,7 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
> return ERR_PTR(ret);
> }
>
> - encoder = &rgb->encoder;
> + encoder = &rgb->encoder.encoder;
> encoder->possible_crtcs = drm_crtc_mask(crtc);
>
> ret = drm_simple_encoder_init(drm_dev, encoder, DRM_MODE_ENCODER_NONE);
> @@ -161,6 +161,8 @@ struct rockchip_rgb *rockchip_rgb_init(struct device *dev,
> goto err_free_encoder;
> }
>
> + rgb->encoder.crtc_endpoint_id = ROCKCHIP_VOP2_EP_RGB0;

This is vop2 specific. This code is used with the vop1 as well, so it
doesn't look like it belongs here, at least not hidden in a patch titled
"embed drm_encoder into rockchip_encoder".

Normally the crtc_endpoint_id is set by the encoder, coming from the
encoder node, asking the question "To which port on the VOP am I
connected to?"

Here the situation is different. We are called from the VOP and the
question instead is: "Is there something connected to VPx endpoint id
ROCKCHIP_VOP2_EP_RGB0?"

You might need a vop2 specific entry to this code.

Sascha

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |