Re: [PATCH v3 10/11] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

From: Dmitry Baryshkov
Date: Mon Dec 05 2022 - 11:46:18 EST


On 05/12/2022 18:37, Robert Foss wrote:
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..39462c659c58 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@ &cdsp {
firmware-name = "qcom/sm8350/cdsp.mbn";
};
+&dispcc {
+ status = "okay";
+};
+
+&dsi0 {

Bjorn suggested using mdss_dsi0 / mdss_dsi0_phy labels for DSI host and PHY, as it allows us to group them nicely. WDYT?

+ vdda-supply = <&vreg_l6b_1p2>;
+ status = "okay";
+};
+
+&dsi0_phy {
+ vdds-supply = <&vreg_l5b_0p88>;
+ status = "okay";
+};
+
&gpi_dma1 {
status = "okay";
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/modem.mbn";

--
With best wishes
Dmitry