Re: [PATCH] iommu: dart: Add suspend/resume support

[Sven Peter]

Hi,

On Mon, Dec 5, 2022, at 11:09, Hector Martin wrote:
> We need to save/restore the TCR/TTBR registers, since they are lost
> on power gate.
>
> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>
> ---
>  drivers/iommu/apple-dart.c | 50 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>
> diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
> index 4f4a323be0d0..ed524765ad87 100644
> --- a/drivers/iommu/apple-dart.c
> +++ b/drivers/iommu/apple-dart.c
> @@ -121,6 +121,9 @@ struct apple_dart {
> 
>  	struct iommu_group *sid2group[DART_MAX_STREAMS];
>  	struct iommu_device iommu;
> +
> +	u32 save_tcr[DART_MAX_STREAMS];
> +	u32 save_ttbr[DART_MAX_STREAMS][DART_MAX_TTBR];
>  };
> 
>  /*
> @@ -932,6 +935,50 @@ static const struct apple_dart_hw apple_dart_hw_t6000 = {
>  	.fmt = APPLE_DART2,
>  };
> 
> +#ifdef CONFIG_PM_SLEEP
> +static int apple_dart_suspend(struct device *dev)
> +{
> +	struct apple_dart *dart = dev_get_drvdata(dev);
> +	unsigned int sid, idx;
> +
> +	for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
> +		dart->save_tcr[sid] = readl_relaxed(dart->regs + DART_TCR(sid));
> +		for (idx = 0; idx < DART_MAX_TTBR; idx++)
> +			dart->save_ttbr[sid][idx] =
> +				readl_relaxed(dart->regs + DART_TTBR(sid, idx));

The rest of the driver uses the non-relaxed variants and I'd use the
same here (and further below) to be consistent.


> +	}
> +
> +	return 0;
> +}
> +
> +static int apple_dart_resume(struct device *dev)
> +{
> +	struct apple_dart *dart = dev_get_drvdata(dev);
> +	unsigned int sid, idx;
> +	int ret;
> +
> +	ret = apple_dart_hw_reset(dart);
> +	if (ret) {
> +		dev_err(dev, "Failed to reset DART on resume\n");
> +		return ret;
> +	}
> +
> +	for (sid = 0; sid < DART_MAX_STREAMS; sid++) {
> +		for (idx = 0; idx < DART_MAX_TTBR; idx++)
> +			writel_relaxed(dart->save_ttbr[sid][idx],
> +				       dart->regs + DART_TTBR(sid, idx));
> +		writel_relaxed(dart->save_tcr[sid], dart->regs + DART_TCR(sid));
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops apple_dart_pm_ops = {
> +	.suspend	= apple_dart_suspend,
> +	.resume		= apple_dart_resume,
> +};
> +#endif

You can use DEFINE_SIMPLE_DEV_PM_OPS here and then ...

> +
>  static const struct of_device_id apple_dart_of_match[] = {
>  	{ .compatible = "apple,t8103-dart", .data = &apple_dart_hw_t8103 },
>  	{ .compatible = "apple,t6000-dart", .data = &apple_dart_hw_t6000 },
> @@ -944,6 +991,9 @@ static struct platform_driver apple_dart_driver = {
>  		.name			= "apple-dart",
>  		.of_match_table		= apple_dart_of_match,
>  		.suppress_bind_attrs    = true,
> +#ifdef CONFIG_PM_SLEEP
> +		.pm			= &apple_dart_pm_ops,

... pm_sleep_ptr() here to get rid of these #ifdefs like e.g. in our nvme
driver.


With those things addressed:

Reviewed-by: Sven Peter <sven@xxxxxxxxxxxxx>


Sven