Re: [PATCH 1/2] x86/pat: fix TDX guest PAT initialization

[kirill]

On Mon, Dec 05, 2022 at 09:04:32AM +0100, Juergen Gross wrote:
> With the decoupling of PAT and MTRR initialization, PAT will be used
> even with MTRRs disabled. This seems to break booting up as TDX guest,
> as the recommended sequence to set the PAT MSR across CPUs can't work
> in TDX guests due to disabling caches via setting CR0.CD isn't allowed
> in TDX mode.
> 
> This is an inconsistency in the Intel documentation between the SDM
> and the TDX specification. For now handle TDX mode the same way as Xen
> PV guest mode by just accepting the current PAT MSR setting without
> trying to modify it.
> 
> Signed-off-by: Juergen Gross <jgross@xxxxxxxx>

Good enough for now. I will follow up if something comes up from the
discussion around the topic.

Acked-by: Kirill A. Shutemov <kirill.shutemov@xxxxxxxxxxxxxxx>

> ---
>  arch/x86/mm/pat/memtype.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/mm/pat/memtype.c b/arch/x86/mm/pat/memtype.c
> index 9aab17d660cd..4e50add760ad 100644
> --- a/arch/x86/mm/pat/memtype.c
> +++ b/arch/x86/mm/pat/memtype.c
> @@ -296,8 +296,12 @@ void __init pat_bp_init(void)
>  	/*
>  	 * Xen PV doesn't allow to set PAT MSR, but all cache modes are
>  	 * supported.
> +	 * When running as TDX guest setting the PAT MSR won't work either
> +	 * due to the requirement to set CR0.CD when doing so. Rely on
> +	 * firmware to have set the PAT MSR correctly.

s/firmware/TDX module/

>  	 */
> -	if (pat_disabled || cpu_feature_enabled(X86_FEATURE_XENPV)) {
> +	if (pat_disabled || cpu_feature_enabled(X86_FEATURE_XENPV) ||
> +	    cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {
>  		init_cache_modes(pat_msr_val);
>  		return;
>  	}

-- 
  Kiryl Shutsemau / Kirill A. Shutemov