[PATCH 3/3] dt-bindings: leds: irled: ir-spi-led: convert to DT schema

From: Krzysztof Kozlowski
Date: Sun Dec 04 2022 - 05:43:41 EST


Convert the SPI IR LED bindings to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/leds/irled/ir-spi-led.yaml | 61 +++++++++++++++++++
.../bindings/leds/irled/spi-ir-led.txt | 29 ---------
2 files changed, 61 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
delete mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt

diff --git a/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
new file mode 100644
index 000000000000..72cadebf6e3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through SPI bus
+
+maintainers:
+ - Sean Young <sean@xxxxxxxx>
+
+description:
+ IR LED switch is connected to the MOSI line of the SPI device and the data
+ is delivered through that.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: ir-spi-led
+
+ reg:
+ maxItems: 1
+
+ duty-cycle:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [50, 60, 70, 75, 80, 90]
+ description:
+ Percentage of one period in which the signal is active.
+
+ led-active-low:
+ type: boolean
+ description:
+ Output is negated with a NOT gate.
+
+ power-supply: true
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ irled@0 {
+ compatible = "ir-spi-led";
+ reg = <0x0>;
+
+ duty-cycle = /bits/ 8 <60>;
+ led-active-low;
+ power-supply = <&irda_regulator>;
+ spi-max-frequency = <5000000>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
deleted file mode 100644
index 83ff1b4d70a6..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device tree bindings for IR LED connected through SPI bus which is used as
-remote controller.
-
-The IR LED switch is connected to the MOSI line of the SPI device and the data
-are delivered thourgh that.
-
-Required properties:
- - compatible: should be "ir-spi-led".
-
-Optional properties:
- - duty-cycle: 8 bit value that represents the percentage of one period
- in which the signal is active. It can be 50, 60, 70, 75, 80 or 90.
- - led-active-low: boolean value that specifies whether the output is
- negated with a NOT gate.
- - power-supply: specifies the power source. It can either be a regulator
- or a gpio which enables a regulator, i.e. a regulator-fixed as
- described in
- Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
-
-Example:
-
- irled@0 {
- compatible = "ir-spi-led";
- reg = <0x0>;
- spi-max-frequency = <5000000>;
- power-supply = <&vdd_led>;
- led-active-low;
- duty-cycle = /bits/ 8 <60>;
- };
--
2.34.1