Re: [PATCH] wifi: rtl8xxxu: fixing IQK failures for rtl8192eu

From: Bitterblue Smith
Date: Thu Dec 01 2022 - 08:10:04 EST


On 01/12/2022 04:18, Ping-Ke Shih wrote:
>
>> -----Original Message-----
>> From: Jun ASAKA <JunASAKA@xxxxxxxxxxxxx>
>> Sent: Thursday, December 1, 2022 9:39 AM
>> To: Ping-Ke Shih <pkshih@xxxxxxxxxxx>; Jes.Sorensen@xxxxxxxxx
>> Cc: kvalo@xxxxxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx;
>> linux-wireless@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH] wifi: rtl8xxxu: fixing IQK failures for rtl8192eu
>>
>> On 01/12/2022 8:54 am, Ping-Ke Shih wrote:
>>
>>>
>>>> -----Original Message-----
>>>> From: JunASAKA <JunASAKA@xxxxxxxxxxxxx>
>>>> Sent: Wednesday, November 30, 2022 10:09 PM
>>>> To: Jes.Sorensen@xxxxxxxxx
>>>> Cc: kvalo@xxxxxxxxxx; davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx; pabeni@xxxxxxxxxx;
>>>> linux-wireless@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; JunASAKA
>>>> <JunASAKA@xxxxxxxxxxxxx>
>>>> Subject: [PATCH] wifi: rtl8xxxu: fixing IQK failures for rtl8192eu
>>>>
>>>> Fixing "Path A RX IQK failed" and "Path B RX IQK failed"
>>>> issues for rtl8192eu chips by replacing the arguments with
>>>> the ones in the updated official driver.
>>> I think it would be better if you can point out which version you use, and
>>> people will not modify them back to old version suddenly.
>>>
>>>> Signed-off-by: JunASAKA <JunASAKA@xxxxxxxxxxxxx>
>>>> ---
>>>> .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 76 +++++++++++++------
>>>> 1 file changed, 54 insertions(+), 22 deletions(-)
>>>>
>>>> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>>>> b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>>>> index b06508d0cd..82346500f2 100644
>>>> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>>>> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
>>> [...]
>>>
>>>> @@ -891,22 +907,28 @@ static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv)
>>>>
>>>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>>>> rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180);
>>>> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>>>
>>>> - rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>>>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0);
>>>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x20000);
>>>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f);
>>>> + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0x07f77);
>>>> +
>>>> rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>>>
>>>> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000);
>>>> + // rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
>>>> +
>>> I think this is a test code of vendor driver. No need them here.
>>>
>>>
>>>> /* Path B IQK setting */
>>>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
>>>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
>>>> rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c);
>>>> rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
>>>>
>>>> - rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2);
>>>> + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140303);
>>>> rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000);
>>>>
>>>> /* LO calibration setting */
>>>> - rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911);
>>>> + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
>>>>
>>>> /* One shot, path A LOK & IQK */
>>>> rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000);
>>> [...]
>>>
>>> I have compared your patch with internal code, and they are the same.
>>> But, I don't have a test.
>>>
>>> Ping-Ke
>>
>> I changed those arguments into the ones here:
>> https://github.com/Mange/rtl8192eu-linux-driver which works fine with my
>> rtl8192eu wifi dongle. But forgive my ignorant that I don't have enough
>> experience on wifi drivers, I just compared those two drivers and
>> figured that those codes fixing my IQK failures.
>
> I do similar things as well. :-)
>
> The github repository mentioned
> "This branch is based on Realtek's driver versioned 4.4.1. master is based on 4.3.1.1 originally."
> So, we can add something to commit message:
> 1. https://github.com/Mange/rtl8192eu-linux-driver
> 2. vendor driver version: 4.3.1.1
>
> --
> Ping-Ke
>

That repo is confusing, unfortunately. Indeed, the "master" branch seems to
contain v4.3.1.1_11320.20140505. But the last commit is from 2017.

The "realtek-4.4.x" branch is the one being actively maintained, and at some
point it was updated to v5.6.4_35685.20191108_COEX20171113-0047. README.md
was forgotten.