[PATCH v1 4/7] net: phy: motorcomm: Add YT8531 phy support

From: Yanhong Wang
Date: Thu Dec 01 2022 - 04:02:25 EST


This adds basic support for the Motorcomm YT8531
Gigabit Ethernet PHY.

Signed-off-by: Yanhong Wang <yanhong.wang@xxxxxxxxxxxxxxxx>
---
drivers/net/phy/Kconfig | 3 +-
drivers/net/phy/motorcomm.c | 185 ++++++++++++++++++++++++++++++++++++
2 files changed, 187 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index c57a0262fb64..86399254d9ff 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -258,9 +258,10 @@ config MICROSEMI_PHY

config MOTORCOMM_PHY
tristate "Motorcomm PHYs"
+ default SOC_STARFIVE
help
Enables support for Motorcomm network PHYs.
- Currently supports the YT8511 gigabit PHY.
+ Currently supports the YT8511 and YT8531 gigabit PHYs.

config NATIONAL_PHY
tristate "National Semiconductor PHYs"
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 7e6ac2c5e27e..7f3e22879399 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -3,13 +3,17 @@
* Driver for Motorcomm PHYs
*
* Author: Peter Geis <pgwipeout@xxxxxxxxx>
+ *
*/

+#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/phy.h>

#define PHY_ID_YT8511 0x0000010a
+#define PHY_ID_YT8531 0x4f51e91b

#define YT8511_PAGE_SELECT 0x1e
#define YT8511_PAGE 0x1f
@@ -17,6 +21,10 @@
#define YT8511_EXT_DELAY_DRIVE 0x0d
#define YT8511_EXT_SLEEP_CTRL 0x27

+#define YTPHY_EXT_SMI_SDS_PHY 0xa000
+#define YTPHY_EXT_CHIP_CONFIG 0xa001
+#define YTPHY_EXT_RGMII_CONFIG1 0xa003
+
/* 2b00 25m from pll
* 2b01 25m from xtl *default*
* 2b10 62.m from pll
@@ -38,6 +46,34 @@
#define YT8511_DELAY_FE_TX_EN (0xf << 12)
#define YT8511_DELAY_FE_TX_DIS (0x2 << 12)

+struct ytphy_reg_field {
+ char *name;
+ u32 mask;
+ u8 dflt; /* Default value */
+};
+
+struct ytphy_priv_t {
+ u32 tx_inverted_1000;
+ u32 tx_inverted_100;
+ u32 tx_inverted_10;
+};
+
+static const struct ytphy_reg_field ytphy_rxtxd_grp[] = {
+ { "rx_delay_sel", GENMASK(13, 10), 0x0 },
+ { "tx_delay_sel_fe", GENMASK(7, 4), 0xf },
+ { "tx_delay_sel", GENMASK(3, 0), 0x1 }
+};
+
+static const struct ytphy_reg_field ytphy_txinver_grp[] = {
+ { "tx_inverted_1000", BIT(14), 0x0 },
+ { "tx_inverted_100", BIT(14), 0x0 },
+ { "tx_inverted_10", BIT(14), 0x0 }
+};
+
+static const struct ytphy_reg_field ytphy_rxden_grp[] = {
+ { "rxc_dly_en", BIT(8), 0x1 }
+};
+
static int yt8511_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, YT8511_PAGE_SELECT);
@@ -48,6 +84,33 @@ static int yt8511_write_page(struct phy_device *phydev, int page)
return __phy_write(phydev, YT8511_PAGE_SELECT, page);
};

+static int ytphy_read_ext(struct phy_device *phydev, u32 regnum)
+{
+ int ret;
+ int val;
+
+ ret = __phy_write(phydev, YT8511_PAGE_SELECT, regnum);
+ if (ret < 0)
+ return ret;
+
+ val = __phy_read(phydev, YT8511_PAGE);
+
+ return val;
+}
+
+static int ytphy_write_ext(struct phy_device *phydev, u32 regnum, u16 val)
+{
+ int ret;
+
+ ret = __phy_write(phydev, YT8511_PAGE_SELECT, regnum);
+ if (ret < 0)
+ return ret;
+
+ ret = __phy_write(phydev, YT8511_PAGE, val);
+
+ return ret;
+}
+
static int yt8511_config_init(struct phy_device *phydev)
{
int oldpage, ret = 0;
@@ -111,6 +174,116 @@ static int yt8511_config_init(struct phy_device *phydev)
return phy_restore_page(phydev, oldpage, ret);
}

+static int ytphy_config_init(struct phy_device *phydev)
+{
+ struct device_node *of_node;
+ u32 val;
+ u32 mask;
+ u32 cfg;
+ int ret;
+ int i = 0;
+
+ of_node = phydev->mdio.dev.of_node;
+ if (of_node) {
+ ret = of_property_read_u32(of_node, ytphy_rxden_grp[0].name, &cfg);
+ if (!ret) {
+ mask = ytphy_rxden_grp[0].mask;
+ val = ytphy_read_ext(phydev, YTPHY_EXT_CHIP_CONFIG);
+
+ /* check the cfg overflow or not */
+ cfg = cfg > mask >> (ffs(mask) - 1) ? mask : cfg;
+
+ val &= ~mask;
+ val |= FIELD_PREP(mask, cfg);
+ ytphy_write_ext(phydev, YTPHY_EXT_CHIP_CONFIG, val);
+ }
+
+ val = ytphy_read_ext(phydev, YTPHY_EXT_RGMII_CONFIG1);
+ for (i = 0; i < ARRAY_SIZE(ytphy_rxtxd_grp); i++) {
+ ret = of_property_read_u32(of_node, ytphy_rxtxd_grp[i].name, &cfg);
+ if (!ret) {
+ mask = ytphy_rxtxd_grp[i].mask;
+
+ /* check the cfg overflow or not */
+ cfg = cfg > mask >> (ffs(mask) - 1) ? mask : cfg;
+
+ val &= ~mask;
+ val |= cfg << (ffs(mask) - 1);
+ }
+ }
+ return ytphy_write_ext(phydev, YTPHY_EXT_RGMII_CONFIG1, val);
+ }
+
+ phydev_err(phydev, "Get of node fail\n");
+
+ return -EINVAL;
+}
+
+static void ytphy_link_change_notify(struct phy_device *phydev)
+{
+ u32 val;
+ struct ytphy_priv_t *ytphy_priv = phydev->priv;
+
+ if (phydev->speed < 0)
+ return;
+
+ val = ytphy_read_ext(phydev, YTPHY_EXT_RGMII_CONFIG1);
+ switch (phydev->speed) {
+ case SPEED_1000:
+ val &= ~ytphy_txinver_grp[0].mask;
+ val |= FIELD_PREP(ytphy_txinver_grp[0].mask,
+ ytphy_priv->tx_inverted_1000);
+ break;
+
+ case SPEED_100:
+ val &= ~ytphy_txinver_grp[1].mask;
+ val |= FIELD_PREP(ytphy_txinver_grp[1].mask,
+ ytphy_priv->tx_inverted_100);
+ break;
+
+ case SPEED_10:
+ val &= ~ytphy_txinver_grp[2].mask;
+ val |= FIELD_PREP(ytphy_txinver_grp[2].mask,
+ ytphy_priv->tx_inverted_10);
+ break;
+
+ default:
+ break;
+ }
+
+ ytphy_write_ext(phydev, YTPHY_EXT_RGMII_CONFIG1, val);
+}
+
+static int yt8531_probe(struct phy_device *phydev)
+{
+ struct ytphy_priv_t *priv;
+ const struct device_node *of_node;
+ u32 val;
+ int ret;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ of_node = phydev->mdio.dev.of_node;
+ if (of_node) {
+ ret = of_property_read_u32(of_node, ytphy_txinver_grp[0].name, &val);
+ if (!ret)
+ priv->tx_inverted_1000 = val;
+
+ ret = of_property_read_u32(of_node, ytphy_txinver_grp[1].name, &val);
+ if (!ret)
+ priv->tx_inverted_100 = val;
+
+ ret = of_property_read_u32(of_node, ytphy_txinver_grp[2].name, &val);
+ if (!ret)
+ priv->tx_inverted_10 = val;
+ }
+ phydev->priv = priv;
+
+ return 0;
+}
+
static struct phy_driver motorcomm_phy_drvs[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
@@ -120,6 +293,17 @@ static struct phy_driver motorcomm_phy_drvs[] = {
.resume = genphy_resume,
.read_page = yt8511_read_page,
.write_page = yt8511_write_page,
+ }, {
+ PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
+ .name = "YT8531 Gigabit Ethernet",
+ .probe = yt8531_probe,
+ .config_init = ytphy_config_init,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = yt8511_read_page,
+ .write_page = yt8511_write_page,
+ .link_change_notify = ytphy_link_change_notify,
},
};

@@ -131,6 +315,7 @@ MODULE_LICENSE("GPL");

static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
{ /* sentinal */ }
};

--
2.17.1