RE: [PATCH v4 8/9] cpufreq: amd_pstate: add driver working mode status sysfs entry

From: Yuan, Perry
Date: Wed Nov 30 2022 - 12:15:32 EST


[AMD Official Use Only - General]



> -----Original Message-----
> From: Limonciello, Mario <Mario.Limonciello@xxxxxxx>
> Sent: Tuesday, November 15, 2022 6:30 AM
> To: Yuan, Perry <Perry.Yuan@xxxxxxx>; rafael.j.wysocki@xxxxxxxxx; Huang,
> Ray <Ray.Huang@xxxxxxx>; viresh.kumar@xxxxxxxxxx
> Cc: Sharma, Deepak <Deepak.Sharma@xxxxxxx>; Fontenot, Nathan
> <Nathan.Fontenot@xxxxxxx>; Deucher, Alexander
> <Alexander.Deucher@xxxxxxx>; Huang, Shimmer
> <Shimmer.Huang@xxxxxxx>; Du, Xiaojian <Xiaojian.Du@xxxxxxx>; Meng,
> Li (Jassmine) <Li.Meng@xxxxxxx>; Karny, Wyes <Wyes.Karny@xxxxxxx>;
> linux-pm@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v4 8/9] cpufreq: amd_pstate: add driver working mode
> status sysfs entry
>
> On 11/10/2022 11:58, Perry Yuan wrote:
> > While amd-pstate driver was loaded with specific driver mode, it will
> > need to check which mode is enabled for the pstate driver,add this
> > sysfs entry to show the current status
> >
> > $ cat /sys/devices/system/cpu/amd-pstate/status
> > active
> >
> > Signed-off-by: Perry Yuan <Perry.Yuan@xxxxxxx>
> > ---
> > drivers/cpufreq/amd-pstate.c | 44
> ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/cpufreq/amd-pstate.c
> > b/drivers/cpufreq/amd-pstate.c index b71bfbbb7639..6a3b610cb084
> 100644
> > --- a/drivers/cpufreq/amd-pstate.c
> > +++ b/drivers/cpufreq/amd-pstate.c
> > @@ -65,6 +65,8 @@ static int cppc_load __initdata;
> > static int epp_off __initdata;
> >
> > static struct cpufreq_driver *default_pstate_driver;
> > +static struct cpufreq_driver amd_pstate_epp_driver; static struct
> > +cpufreq_driver amd_pstate_driver;
> > static struct amd_cpudata **all_cpu_data;
> >
> > static struct amd_pstate_params global_params; @@ -798,6 +800,46 @@
> > static ssize_t store_boost(struct kobject *a,
> > return count;
> > }
> >
> > +static ssize_t amd_pstate_show_status(char *buf) {
> > + if (!default_pstate_driver)
> > + return sprintf(buf, "off\n");
> > +
> > + return sprintf(buf, "%s\n", default_pstate_driver ==
> &amd_pstate_epp_driver ?
> > + "active" : "passive");
> > +}
>
> For new code I believe you should use the new helper sysfs_emit() instead.

Make sense, changed in v5.
Thanks .

Perry.

>
> > +
> > +static int amd_pstate_update_status(const char *buf, size_t size) {
> > + /* FIXME! */
> > + return -EOPNOTSUPP;
> > +}
> > +
> > +static ssize_t show_status(struct kobject *kobj,
> > + struct kobj_attribute *attr, char *buf) {
> > + ssize_t ret;
> > +
> > + mutex_lock(&amd_pstate_driver_lock);
> > + ret = amd_pstate_show_status(buf);
> > + mutex_unlock(&amd_pstate_driver_lock);
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t store_status(struct kobject *a, struct kobj_attribute *b,
> > + const char *buf, size_t count) {
> > + char *p = memchr(buf, '\n', count);
> > + int ret;
> > +
> > + mutex_lock(&amd_pstate_driver_lock);
> > + ret = amd_pstate_update_status(buf, p ? p - buf : count);
> > + mutex_unlock(&amd_pstate_driver_lock);
> > +
> > + return ret < 0 ? ret : count;
> > +}
> > +
> > cpufreq_freq_attr_ro(amd_pstate_max_freq);
> > cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq);
> >
> > @@ -805,6 +847,7 @@ cpufreq_freq_attr_ro(amd_pstate_highest_perf);
> > cpufreq_freq_attr_rw(energy_performance_preference);
> > cpufreq_freq_attr_ro(energy_performance_available_preferences);
> > define_one_global_rw(boost);
> > +define_one_global_rw(status);
> >
> > static struct freq_attr *amd_pstate_attr[] = {
> > &amd_pstate_max_freq,
> > @@ -824,6 +867,7 @@ static struct freq_attr *amd_pstate_epp_attr[] = {
> >
> > static struct attribute *pstate_global_attributes[] = {
> > &boost.attr,
> > + &status.attr,
> > NULL
> > };
> >

<<attachment: winmail.dat>>