[PATCH v2 1/5] 9p: Fix probe failed when modprobe 9pnet_virtio

From: Li Zetao
Date: Tue Nov 29 2022 - 10:19:15 EST


When doing the following test steps, an error was found:
step 1: modprobe 9pnet_virtio succeeded
# modprobe 9pnet_virtio <-- OK

step 2: fault injection in sysfs_create_file()
# modprobe -r 9pnet_virtio <-- OK
# ...
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 3790 Comm: modprobe Tainted: G W
6.1.0-rc6-00285-g6a1e40c4b995-dirty #108
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
...
should_failslab+0xa/0x20
...
sysfs_create_file_ns+0x130/0x1d0
p9_virtio_probe+0x662/0xb30 [9pnet_virtio]
virtio_dev_probe+0x608/0xae0
...
</TASK>
9pnet_virtio: probe of virtio3 failed with error -12

step 3: modprobe 9pnet_virtio failed
# modprobe 9pnet_virtio <-- failed
9pnet_virtio: probe of virtio3 failed with error -2

The root cause of the problem is that the virtqueues are not
stopped on the error handling path when sysfs_create_file()
fails in p9_virtio_probe(), resulting in an error "-ENOENT"
returned in the next modprobe call in setup_vq().

virtio_pci_modern_device uses virtqueues to send or
receive message, and "queue_enable" records whether the
queues are available. In vp_modern_find_vqs(), all queues
will be selected and activated, but once queues are enabled
there is no way to go back except reset.

Fix it by reset virtio device on error handling path. After
virtio_find_single_vq() succeeded, all virtqueues should be
stopped on error handling path.

Fixes: ea52bf8eda98 ("9p/trans_virtio: reset virtio device on remove")
Signed-off-by: Li Zetao <lizetao1@xxxxxxxxxx>
Reviewed-by: Christian Schoenebeck <linux_oss@xxxxxxxxxxxxx>
---
v1 -> v2: modify the description error of the test case in step 3 and
modify the fixes tag information.

net/9p/trans_virtio.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index e757f0601304..39933187284b 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -668,6 +668,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
out_free_tag:
kfree(tag);
out_free_vq:
+ virtio_reset_device(vdev);
vdev->config->del_vqs(vdev);
out_free_chan:
kfree(chan);
--
2.25.1