[PATCH net-next v2 2/9] octeon_ep: poll for control messages

From: Veerasenareddy Burru
Date: Tue Nov 29 2022 - 08:10:08 EST


Poll for control messages until interrupts are enabled.
All the interrupts are enabled in ndo_open().
Add ability to listen for notifications from firmware before ndo_open().
Once interrupts are enabled, this polling is disabled and all the
messages are processed by bottom half of interrupt handler.

Signed-off-by: Veerasenareddy Burru <vburru@xxxxxxxxxxx>
Signed-off-by: Abhijit Ayarekar <aayarekar@xxxxxxxxxxx>
---
v1 -> v2:
* removed device status oct->status, as it is not required with the
modified implementation in 0001-xxxx.patch

.../marvell/octeon_ep/octep_cn9k_pf.c | 49 +++++++++----------
.../ethernet/marvell/octeon_ep/octep_main.c | 35 +++++++++++++
.../ethernet/marvell/octeon_ep/octep_main.h | 11 ++++-
.../marvell/octeon_ep/octep_regs_cn9k_pf.h | 4 ++
4 files changed, 71 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
index 6ad88d0fe43f..ace2dfd1e918 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
@@ -352,27 +352,36 @@ static void octep_setup_mbox_regs_cn93_pf(struct octep_device *oct, int q_no)
mbox->mbox_read_reg = oct->mmio[0].hw_addr + CN93_SDP_R_MBOX_VF_PF_DATA(q_no);
}

-/* Mailbox Interrupt handler */
-static void cn93_handle_pf_mbox_intr(struct octep_device *oct)
+/* Process non-ioq interrupts required to keep pf interface running.
+ * OEI_RINT is needed for control mailbox
+ */
+static int octep_poll_non_ioq_interrupts_cn93_pf(struct octep_device *oct)
{
- u64 mbox_int_val = 0ULL, val = 0ULL, qno = 0ULL;
+ u64 reg0;
+ int handled = 0;

- mbox_int_val = readq(oct->mbox[0]->mbox_int_reg);
- for (qno = 0; qno < OCTEP_MAX_VF; qno++) {
- val = readq(oct->mbox[qno]->mbox_read_reg);
- dev_dbg(&oct->pdev->dev,
- "PF MBOX READ: val:%llx from VF:%llx\n", val, qno);
+ /* Check for OEI INTR */
+ reg0 = octep_read_csr64(oct, CN93_SDP_EPF_OEI_RINT);
+ if (reg0) {
+ dev_info(&oct->pdev->dev,
+ "Received OEI_RINT intr: 0x%llx\n",
+ reg0);
+ octep_write_csr64(oct, CN93_SDP_EPF_OEI_RINT, reg0);
+ if (reg0 & CN93_SDP_EPF_OEI_RINT_DATA_BIT_MBOX)
+ queue_work(octep_wq, &oct->ctrl_mbox_task);
+
+ handled = 1;
}

- writeq(mbox_int_val, oct->mbox[0]->mbox_int_reg);
+ return handled;
}

/* Interrupts handler for all non-queue generic interrupts. */
static irqreturn_t octep_non_ioq_intr_handler_cn93_pf(void *dev)
{
struct octep_device *oct = (struct octep_device *)dev;
- struct pci_dev *pdev = oct->pdev;
u64 reg_val = 0;
+ struct pci_dev *pdev = oct->pdev;
int i = 0;

/* Check for IRERR INTR */
@@ -434,24 +443,9 @@ static irqreturn_t octep_non_ioq_intr_handler_cn93_pf(void *dev)
goto irq_handled;
}

- /* Check for MBOX INTR */
- reg_val = octep_read_csr64(oct, CN93_SDP_EPF_MBOX_RINT(0));
- if (reg_val) {
- dev_info(&pdev->dev,
- "Received MBOX_RINT intr: 0x%llx\n", reg_val);
- cn93_handle_pf_mbox_intr(oct);
+ /* Check for MBOX INTR and OEI INTR */
+ if (octep_poll_non_ioq_interrupts_cn93_pf(oct))
goto irq_handled;
- }
-
- /* Check for OEI INTR */
- reg_val = octep_read_csr64(oct, CN93_SDP_EPF_OEI_RINT);
- if (reg_val) {
- dev_info(&pdev->dev,
- "Received OEI_EINT intr: 0x%llx\n", reg_val);
- octep_write_csr64(oct, CN93_SDP_EPF_OEI_RINT, reg_val);
- queue_work(octep_wq, &oct->ctrl_mbox_task);
- goto irq_handled;
- }

/* Check for DMA INTR */
reg_val = octep_read_csr64(oct, CN93_SDP_EPF_DMA_RINT);
@@ -712,6 +706,7 @@ void octep_device_setup_cn93_pf(struct octep_device *oct)

oct->hw_ops.enable_interrupts = octep_enable_interrupts_cn93_pf;
oct->hw_ops.disable_interrupts = octep_disable_interrupts_cn93_pf;
+ oct->hw_ops.poll_non_ioq_interrupts = octep_poll_non_ioq_interrupts_cn93_pf;

oct->hw_ops.update_iq_read_idx = octep_update_iq_read_index_cn93_pf;

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index aa7d0ced9807..c07588461030 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -18,6 +18,7 @@
#include "octep_main.h"
#include "octep_ctrl_net.h"

+#define OCTEP_INTR_POLL_TIME_MSECS 100
struct workqueue_struct *octep_wq;

/* Supported Devices */
@@ -512,6 +513,7 @@ static int octep_open(struct net_device *netdev)
ret = octep_get_link_status(oct);
if (!ret)
octep_set_link_status(oct, true);
+ oct->poll_non_ioq_intr = false;

/* Enable the input and output queues for this Octeon device */
oct->hw_ops.enable_io_queues(oct);
@@ -573,6 +575,11 @@ static int octep_stop(struct net_device *netdev)
oct->hw_ops.reset_io_queues(oct);
octep_free_oqs(oct);
octep_free_iqs(oct);
+
+ oct->poll_non_ioq_intr = true;
+ queue_delayed_work(octep_wq, &oct->intr_poll_task,
+ msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS));
+
netdev_info(netdev, "Device stopped !!\n");
return 0;
}
@@ -865,6 +872,28 @@ static const struct net_device_ops octep_netdev_ops = {
.ndo_change_mtu = octep_change_mtu,
};

+/**
+ * octep_intr_poll_task - work queue task to process non-ioq interrupts.
+ *
+ * @work: pointer to mbox work_struct
+ *
+ * Process non-ioq interrupts to handle control mailbox, pfvf mailbox.
+ **/
+static void octep_intr_poll_task(struct work_struct *work)
+{
+ struct octep_device *oct = container_of(work, struct octep_device,
+ intr_poll_task.work);
+
+ if (!oct->poll_non_ioq_intr) {
+ dev_info(&oct->pdev->dev, "Interrupt poll task stopped.\n");
+ return;
+ }
+
+ oct->hw_ops.poll_non_ioq_interrupts(oct);
+ queue_delayed_work(octep_wq, &oct->intr_poll_task,
+ msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS));
+}
+
/**
* octep_ctrl_mbox_task - work queue task to handle ctrl mbox messages.
*
@@ -1101,6 +1130,10 @@ static int octep_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
INIT_WORK(&octep_dev->tx_timeout_task, octep_tx_timeout_task);
INIT_WORK(&octep_dev->ctrl_mbox_task, octep_ctrl_mbox_task);
+ INIT_DELAYED_WORK(&octep_dev->intr_poll_task, octep_intr_poll_task);
+ octep_dev->poll_non_ioq_intr = true;
+ queue_delayed_work(octep_wq, &octep_dev->intr_poll_task,
+ msecs_to_jiffies(OCTEP_INTR_POLL_TIME_MSECS));

netdev->netdev_ops = &octep_netdev_ops;
octep_set_ethtool_ops(netdev);
@@ -1162,6 +1195,8 @@ static void octep_remove(struct pci_dev *pdev)
if (netdev->reg_state == NETREG_REGISTERED)
unregister_netdev(netdev);

+ oct->poll_non_ioq_intr = false;
+ cancel_delayed_work_sync(&oct->intr_poll_task);
octep_device_cleanup(oct);
pci_release_mem_regions(pdev);
free_netdev(netdev);
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
index 123ffc13754d..70cc3e236cb4 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.h
@@ -73,6 +73,7 @@ struct octep_hw_ops {

void (*enable_interrupts)(struct octep_device *oct);
void (*disable_interrupts)(struct octep_device *oct);
+ int (*poll_non_ioq_interrupts)(struct octep_device *oct);

void (*enable_io_queues)(struct octep_device *oct);
void (*disable_io_queues)(struct octep_device *oct);
@@ -270,7 +271,15 @@ struct octep_device {

/* Work entry to handle ctrl mbox interrupt */
struct work_struct ctrl_mbox_task;
-
+ /* Wait queue for host to firmware requests */
+ wait_queue_head_t ctrl_req_wait_q;
+ /* List of objects waiting for h2f response */
+ struct list_head ctrl_req_wait_list;
+
+ /* Enable non-ioq interrupt polling */
+ bool poll_non_ioq_intr;
+ /* Work entry to poll non-ioq interrupts */
+ struct delayed_work intr_poll_task;
};

static inline u16 OCTEP_MAJOR_REV(struct octep_device *oct)
diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
index 3d5d39a52fe6..0466fd9a002d 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_regs_cn9k_pf.h
@@ -364,4 +364,8 @@

/* Number of non-queue interrupts in CN93xx */
#define CN93_NUM_NON_IOQ_INTR 16
+
+/* bit 0 for control mbox interrupt */
+#define CN93_SDP_EPF_OEI_RINT_DATA_BIT_MBOX BIT_ULL(0)
+
#endif /* _OCTEP_REGS_CN9K_PF_H_ */
--
2.36.0