Re: [PATCH v2 4/5] arm64: dts: Add DT node for the VIPNano-QI on the A311D

[Neil Armstrong]

On 28/11/2022 12:17, Tomeu Vizoso wrote:
> This "NPU" is very similar to the Vivante GPUs and Etnaviv works well
> with it with just a few small changes.
>
> v2: Add reference to RESET_NNA (Neil)
>
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi     | 11 +++++++++++
>   .../boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts |  4 ++++
>   2 files changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 45947c1031c4..aaa629816e41 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -11,6 +11,7 @@
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
>   #include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/power/meson-g12a-power.h>
>   
>   / {
>   	interrupt-parent = <&gic>;
> @@ -2484,4 +2485,14 @@ xtal: xtal-clk {
>   		#clock-cells = <0>;
>   	};
>   
> +	npu: npu@ff100000 {
> +		compatible = "vivante,gc";
> +		reg = <0x0 0xff100000 0x0 0x20000>;
> +		interrupts = <0 147 4>;
> +		clocks = <&clkc CLKID_NNA_CORE_CLK>,
> +			<&clkc CLKID_NNA_AXI_CLK>;

Nit pick, but this should be aligned.

> +		clock-names = "core", "bus";
> +		resets = <&reset RESET_NNA>;
> +		power-domains = <&pwrc PWRC_G12A_NNA_ID>;
> +	};
>   };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
> index 124a80901084..73f3d87dcefd 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
> @@ -15,6 +15,10 @@ / {
>   	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
>   };
>   
> +&npu {
> +	status = "okay";
> +};
> +
>   /*
>    * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
>    * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between

With that fixed:
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>