Re: [PATCH V3 1/2] PCI/DOE: Remove the pci_doe_flush_mb() call

[Ira Weiny]

On Mon, Nov 28, 2022 at 09:51:47AM -0800, Alison Schofield wrote:
> On Sun, Nov 27, 2022 at 08:03:37PM -0800, Ira Weiny wrote:
> > From: Ira Weiny <ira.weiny@xxxxxxxxx>
> > 
> > pci_doe_flush_mb() does not work and is currently unused.
> > 
> > It does not work because each struct doe_mb is managed as part of the
> > PCI device.  They can't go away as long as the PCI device exists.
> > pci_doe_flush_mb() was set up to flush the workqueue and prevent any
> > further submissions to the mailboxes when the PCI device goes away.
> > Unfortunately, this was fundamentally flawed.  There was no guarantee
> > that a struct doe_mb remained after pci_doe_flush_mb() returned.
> > Therefore, the doe_mb state could be invalid when those threads waiting
> > on the workqueue were flushed.
> > 
> > Fortunately the current code is safe because all callers make a
> > synchronous call to pci_doe_submit_task() and maintain a reference on
> > the PCI device.  Therefore pci_doe_flush_mb() is effectively unused.
> > 
> > Rather than attempt to fix pci_doe_flush_mb() just remove the dead code
> > around pci_doe_flush_mb().
> 
> The commit message says "Remove ...." and the commit log only
> talks about removing code, yet an msleep() is added.
> Can those be clearer?

:-/

I'm struggling a bit with this comment.  The patch focus is on removing an
unneeded and effectively unused function.  (It is called but not in a way that
would cause any running task to be aborted.)  The replacement of pci_doe_wait()
with msleep_interruptible() is a side effect and I don't think belongs in the
one liner.

I suppose something like this might work?

PCI/DOE: Replace broken task cancellation with msleep

I guess that makes some sense.  Combined with Ming's suggestion we are still
allowing task cancellation but from a signal rather than PCI device removal.

Ira

> 
> > 
> > Cc: Lukas Wunner <lukas@xxxxxxxxx>
> > Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
> > 
> > ---
> > Changes from V2:
> > 	Lukas
> > 		Clarify commit message.
> > 	Jonathan
> > 		Add comment for changed poll interval.
> > ---
> >  drivers/pci/doe.c | 49 +++++------------------------------------------
> >  1 file changed, 5 insertions(+), 44 deletions(-)
> > 
> > diff --git a/drivers/pci/doe.c b/drivers/pci/doe.c
> > index e402f05068a5..685e7d26c7eb 100644
> > --- a/drivers/pci/doe.c
> > +++ b/drivers/pci/doe.c
> > @@ -24,10 +24,10 @@
> >  
> >  /* Timeout of 1 second from 6.30.2 Operation, PCI Spec r6.0 */
> >  #define PCI_DOE_TIMEOUT HZ
> > -#define PCI_DOE_POLL_INTERVAL	(PCI_DOE_TIMEOUT / 128)
> > +/* Interval to poll mailbox status */
> > +#define PCI_DOE_POLL_INTERVAL_MSECS	8
> >  
> > -#define PCI_DOE_FLAG_CANCEL	0
> > -#define PCI_DOE_FLAG_DEAD	1
> > +#define PCI_DOE_FLAG_DEAD	0
> >  
> >  /**
> >   * struct pci_doe_mb - State for a single DOE mailbox
> > @@ -53,15 +53,6 @@ struct pci_doe_mb {
> >  	unsigned long flags;
> >  };
> >  
> > -static int pci_doe_wait(struct pci_doe_mb *doe_mb, unsigned long timeout)
> > -{
> > -	if (wait_event_timeout(doe_mb->wq,
> > -			       test_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags),
> > -			       timeout))
> > -		return -EIO;
> > -	return 0;
> > -}
> > -
> >  static void pci_doe_write_ctrl(struct pci_doe_mb *doe_mb, u32 val)
> >  {
> >  	struct pci_dev *pdev = doe_mb->pdev;
> > @@ -82,12 +73,9 @@ static int pci_doe_abort(struct pci_doe_mb *doe_mb)
> >  	pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_ABORT);
> >  
> >  	do {
> > -		int rc;
> >  		u32 val;
> >  
> > -		rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
> > -		if (rc)
> > -			return rc;
> > +		msleep_interruptible(PCI_DOE_POLL_INTERVAL_MSECS);
> >  		pci_read_config_dword(pdev, offset + PCI_DOE_STATUS, &val);
> >  
> >  		/* Abort success! */
> > @@ -278,11 +266,7 @@ static void doe_statemachine_work(struct work_struct *work)
> >  			signal_task_abort(task, -EIO);
> >  			return;
> >  		}
> > -		rc = pci_doe_wait(doe_mb, PCI_DOE_POLL_INTERVAL);
> > -		if (rc) {
> > -			signal_task_abort(task, rc);
> > -			return;
> > -		}
> > +		msleep_interruptible(PCI_DOE_POLL_INTERVAL_MSECS);
> >  		goto retry_resp;
> >  	}
> >  
> > @@ -383,21 +367,6 @@ static void pci_doe_destroy_workqueue(void *mb)
> >  	destroy_workqueue(doe_mb->work_queue);
> >  }
> >  
> > -static void pci_doe_flush_mb(void *mb)
> > -{
> > -	struct pci_doe_mb *doe_mb = mb;
> > -
> > -	/* Stop all pending work items from starting */
> > -	set_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags);
> > -
> > -	/* Cancel an in progress work item, if necessary */
> > -	set_bit(PCI_DOE_FLAG_CANCEL, &doe_mb->flags);
> > -	wake_up(&doe_mb->wq);
> > -
> > -	/* Flush all work items */
> > -	flush_workqueue(doe_mb->work_queue);
> > -}
> > -
> >  /**
> >   * pcim_doe_create_mb() - Create a DOE mailbox object
> >   *
> > @@ -450,14 +419,6 @@ struct pci_doe_mb *pcim_doe_create_mb(struct pci_dev *pdev, u16 cap_offset)
> >  		return ERR_PTR(rc);
> >  	}
> >  
> > -	/*
> > -	 * The state machine and the mailbox should be in sync now;
> > -	 * Set up mailbox flush prior to using the mailbox to query protocols.
> > -	 */
> > -	rc = devm_add_action_or_reset(dev, pci_doe_flush_mb, doe_mb);
> > -	if (rc)
> > -		return ERR_PTR(rc);
> > -
> >  	rc = pci_doe_cache_protocols(doe_mb);
> >  	if (rc) {
> >  		pci_err(pdev, "[%x] failed to cache protocols : %d\n",
> > -- 
> > 2.37.2
> >