[PATCH 6/9] spi: mtk-snfi: add snfi sample delay and read latency adjustment

From: Xiangsheng Hou
Date: Sun Nov 27 2022 - 21:08:18 EST


Add snfi sample delay and read latency adjustment which can get
from dts property.

Signed-off-by: Xiangsheng Hou <xiangsheng.hou@xxxxxxxxxxxx>
---
drivers/spi/spi-mtk-snfi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c
index 85644308df23..e8587cf2aff2 100644
--- a/drivers/spi/spi-mtk-snfi.c
+++ b/drivers/spi/spi-mtk-snfi.c
@@ -195,6 +195,8 @@
#define DATA_READ_MODE_X4 2
#define DATA_READ_MODE_DUAL 5
#define DATA_READ_MODE_QUAD 6
+#define DATA_READ_LATCH_LAT GENMASK(9, 8)
+#define DATA_READ_LATCH_LAT_S 8
#define PG_LOAD_CUSTOM_EN BIT(7)
#define DATARD_CUSTOM_EN BIT(6)
#define CS_DESELECT_CYC_S 0
@@ -205,6 +207,7 @@

#define SNF_DLY_CTL3 0x548
#define SFCK_SAM_DLY_S 0
+#define SFCK_SAM_DLY GENMASK(5, 0)

#define SNF_STA_CTL1 0x550
#define CUS_PG_DONE BIT(28)
@@ -1368,6 +1371,7 @@ static int mtk_snand_probe(struct platform_device *pdev)
const struct of_device_id *dev_id;
struct spi_controller *ctlr;
struct mtk_snand *ms;
+ u32 val = 0;
int ret;

dev_id = of_match_node(mtk_snand_ids, np);
@@ -1446,6 +1450,15 @@ static int mtk_snand_probe(struct platform_device *pdev)
// switch to SNFI mode
nfi_write32(ms, SNF_CFG, SPI_MODE);

+ ret = of_property_read_u32(np, "rx-sample-delay", &val);
+ if (!ret)
+ nfi_rmw32(ms, SNF_DLY_CTL3, SFCK_SAM_DLY, val);
+
+ ret = of_property_read_u32(np, "rx-latch-latency", &val);
+ if (!ret)
+ nfi_rmw32(ms, SNF_MISC_CTL, DATA_READ_LATCH_LAT,
+ val << DATA_READ_LATCH_LAT_S);
+
// setup an initial page format for ops matching page_cache_op template
// before ECC is called.
ret = mtk_snand_setup_pagefmt(ms, SZ_2K, SZ_64);
--
2.25.1