Re: [PATCH v2 1/5] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions

From: Jianlong Huang
Date: Sun Nov 27 2022 - 19:52:59 EST


On Mon, 21 Nov 2022 09:39:46 +0100, Krzysztof Kozlowski wrote:
> On 21/11/2022 09:38, Krzysztof Kozlowski wrote:
>> On 18/11/2022 02:11, Hal Feng wrote:
>>> From: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
>>>
>>> Add pinctrl definitions for StarFive JH7110 SoC.
>>>
>>> Co-developed-by: Emil Renner Berthing <kernel@xxxxxxxx>
>>> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
>>> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
>>> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
>>> ---
>>> .../pinctrl/pinctrl-starfive-jh7110.h | 427 ++++++++++++++++++
>>> 1 file changed, 427 insertions(+)
>>> create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
>>>
>>> diff --git a/include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h b/include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
>>> new file mode 100644
>>> index 000000000000..fb02345caa27
>>> --- /dev/null
>>> +++ b/include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h
>>> @@ -0,0 +1,427 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 OR MIT */
>>> +/*
>>> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
>>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>>> + */
>>> +
>>> +#ifndef __DT_BINDINGS_PINCTRL_STARFIVE_JH7110_H__
>>> +#define __DT_BINDINGS_PINCTRL_STARFIVE_JH7110_H__
>>> +
>>> +/*
>>> + * mux bits:
>>> + * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 |
>>> + * | din | dout | doen | function | gpio nr |
>>> + *
>>> + * dout: output signal
>>> + * doen: output enable signal
>>> + * din: optional input signal, 0xff = none
>>> + * function:
>>> + * gpio nr: gpio number, 0 - 63
>>> + */
>>> +#define GPIOMUX(n, dout, doen, din) ( \
>>> + (((din) & 0xff) << 24) | \
>>> + (((dout) & 0xff) << 16) | \
>>> + (((doen) & 0x3f) << 10) | \
>>> + ((n) & 0x3f))
>>> +
>>
>>
>> (...)
>>
>>> +/* sys_iomux doen */
>>> +#define GPOEN_ENABLE 0
>>> +#define GPOEN_DISABLE 1
>>> +#define GPOEN_SYS_HDMI_CEC_SDA 2
>>> +#define GPOEN_SYS_HDMI_DDC_SCL 3
>>> +#define GPOEN_SYS_HDMI_DDC_SDA 4
>>> +#define GPOEN_SYS_I2C0_CLK 5
>>> +#define GPOEN_SYS_I2C0_DATA 6
>>> +#define GPOEN_SYS_HIFI4_JTAG_TDO 7
>>> +#define GPOEN_SYS_JTAG_TDO 8
>>> +#define GPOEN_SYS_PWM0_CHANNEL0 9
>>> +#define GPOEN_SYS_PWM0_CHANNEL1 10
>>> +#define GPOEN_SYS_PWM0_CHANNEL2 11
>>> +#define GPOEN_SYS_PWM0_CHANNEL3 12
>>> +#define GPOEN_SYS_SPI0_NSSPCTL 13
>>> +#define GPOEN_SYS_SPI0_NSSP 14
>>> +#define GPOEN_SYS_TDM_SYNC 15
>>> +#define GPOEN_SYS_TDM_TXD 16
>>> +#define GPOEN_SYS_I2C1_CLK 17
>>> +#define GPOEN_SYS_I2C1_DATA 18
>>> +#define GPOEN_SYS_SDIO1_CMD 19
>>> +#define GPOEN_SYS_SDIO1_DATA0 20
>>> +#define GPOEN_SYS_SDIO1_DATA1 21
>>> +#define GPOEN_SYS_SDIO1_DATA2 22
>>> +#define GPOEN_SYS_SDIO1_DATA3 23
>>> +#define GPOEN_SYS_SDIO1_DATA4 24
>>> +#define GPOEN_SYS_SDIO1_DATA5 25
>>> +#define GPOEN_SYS_SDIO1_DATA6 26
>>> +#define GPOEN_SYS_SDIO1_DATA7 27
>>> +#define GPOEN_SYS_SPI1_NSSPCTL 28
>>> +#define GPOEN_SYS_SPI1_NSSP 29
>>> +#define GPOEN_SYS_I2C2_CLK 30
>>> +#define GPOEN_SYS_I2C2_DATA 31
>>> +#define GPOEN_SYS_SPI2_NSSPCTL 32
>>> +#define GPOEN_SYS_SPI2_NSSP 33
>>> +#define GPOEN_SYS_I2C3_CLK 34
>>> +#define GPOEN_SYS_I2C3_DATA 35
>>> +#define GPOEN_SYS_SPI3_NSSPCTL 36
>>> +#define GPOEN_SYS_SPI3_NSSP 37
>>> +#define GPOEN_SYS_I2C4_CLK 38
>>> +#define GPOEN_SYS_I2C4_DATA 39
>>> +#define GPOEN_SYS_SPI4_NSSPCTL 40
>>> +#define GPOEN_SYS_SPI4_NSSP 41
>>> +#define GPOEN_SYS_I2C5_CLK 42
>>> +#define GPOEN_SYS_I2C5_DATA 43
>>> +#define GPOEN_SYS_SPI5_NSSPCTL 44
>>> +#define GPOEN_SYS_SPI5_NSSP 45
>>> +#define GPOEN_SYS_I2C6_CLK 46
>>> +#define GPOEN_SYS_I2C6_DATA 47
>>> +#define GPOEN_SYS_SPI6_NSSPCTL 48
>>> +#define GPOEN_SYS_SPI6_NSSP 49
>>> +
>>> +/* aon_iomux doen */
>>> +#define GPOEN_AON_PTC0_OE_N_4 2
>>> +#define GPOEN_AON_PTC0_OE_N_5 3
>>> +#define GPOEN_AON_PTC0_OE_N_6 4
>>> +#define GPOEN_AON_PTC0_OE_N_7 5
>>> +
>>
>> It looks like you add register constants to the bindings. Why? The
>> bindings are not the place to represent hardware programming model. Not
>> mentioning that there is no benefit in this.
>
> Also: this entire file should be dropped, but if it stays, you have to
> name it matching bindings or compatible (vendor,device.h).

Thanks your comments.
These macros are used to configure pinctrl in dts, so the file should stay,
and will change the name as "starfive,jh7110-pinctrl.h" to match bindings or compatible.

Best regards,
Jianlong Huang