[RFC][PATCH 0/2] LIN support for Linux

From: Christoph Fritz
Date: Sun Nov 27 2022 - 14:18:59 EST


The intention of this series is to kick off a discussion about how to
support LIN (ISO 17987) [0] in Linux.

This series consist of two patches which are two individual proposals
for adding LIN abstraction into the kernel.

One approach is to add LIN ontop of CANFD:
[RFC] can: introduce LIN abstraction

The other approach is adding a new type of CAN-socket:
[RFC] can: Add LIN proto skeleton

These patches are abstracting LIN so that actual device drivers can
make use of it.

For reference, the LIN-ontop-of-CANFD variant already has a device
driver using it (not part of this series). It is a specially built USB
LIN-BUS adapter hardware called hexLIN [1]. Its purpose is mainly to
test, adapt and discuss different LIN APIs for mainline Linux kernel.
But it can already be used productively as a Linux LIN node in
controller (master) and responder (slave) mode. By sysfs, hexLIN
supports different checksum calculations and setting up a
responder-table.

For more info about hexLIN, see link below [1].

We are looking for partners with Linux based LIN projects for funding.

[0]: https://en.wikipedia.org/wiki/Local_Interconnect_Network
[1]: https://hexdev.de/hexlin/

Christoph Fritz (1):
[RFC] can: Introduce LIN bus as CANFD abstraction

Richard Weinberger (1):
[RFC] can: Add LIN proto skeleton

drivers/net/can/Kconfig | 10 ++
drivers/net/can/Makefile | 1 +
drivers/net/can/lin.c | 181 +++++++++++++++++++++++++++
include/net/lin.h | 30 +++++
include/uapi/linux/can.h | 8 +-
include/uapi/linux/can/lin.h | 15 +++
include/uapi/linux/can/netlink.h | 1 +
net/can/Kconfig | 5 +
net/can/Makefile | 3 +
net/can/lin.c | 207 +++++++++++++++++++++++++++++++
10 files changed, 460 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/can/lin.c
create mode 100644 include/net/lin.h
create mode 100644 include/uapi/linux/can/lin.h
create mode 100644 net/can/lin.c

--
2.30.2