Re: [PATCH v6] hwmon: (pmbus/core): Implement regulator get_status

[Naresh Solanki]

On 25-11-2022 09:21 pm, Guenter Roeck wrote:
> On Thu, Nov 24, 2022 at 08:36:42PM +0100, Naresh Solanki wrote:
> > From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> >
> > Add get_status for pmbus_regulator_ops.
> > ---
>
> Adding "---" into the commit description causes everything afterwards
> to get lost when applying the patch, including the signatures.
> I fixed it up and applied it, but please don't do that in the future.
Sure. Thanks
> Guenter
>
> > Changes:
> > - use lock throughout the function
> > - Avoid line continuation upto 100 column
> > - Optimize use of & and | operator
> > - Check for VOUT, IOUT, TEMPERATURE bit in status word before checking
> >    respective status register for fault.
> > - Report regulator current status.
> > - Utilize get_error_flag to check for regulator errors.
> > - Check for return value of function get_error_flag
> > - Use function pmbus_regulator_get_error_flags directly
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> > ---
> >   drivers/hwmon/pmbus/pmbus_core.c | 44 ++++++++++++++++++++++++++++++++
> >   1 file changed, 44 insertions(+)
> >
> >
> > base-commit: 2c71b3246ec3246522e8cb7c8191dc7a5d62cc70
> >
> > diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> > index 20ca26e19db7..95e95783972a 100644
> > --- a/drivers/hwmon/pmbus/pmbus_core.c
> > +++ b/drivers/hwmon/pmbus/pmbus_core.c
> > @@ -2855,6 +2855,49 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
> >   	return 0;
> >   }
> >   
> > +static int pmbus_regulator_get_status(struct regulator_dev *rdev)
> > +{
> > +	struct device *dev = rdev_get_dev(rdev);
> > +	struct i2c_client *client = to_i2c_client(dev->parent);
> > +	struct pmbus_data *data = i2c_get_clientdata(client);
> > +	u8 page = rdev_get_id(rdev);
> > +	int status, ret;
> > +
> > +	mutex_lock(&data->update_lock);
> > +	status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
> > +	if (status < 0) {
> > +		ret = status;
> > +		goto unlock;
> > +	}
> > +
> > +	if (status & PB_STATUS_OFF) {
> > +		ret = REGULATOR_STATUS_OFF;
> > +		goto unlock;
> > +	}
> > +
> > +	/* If regulator is ON & reports power good then return ON */
> > +	if (!(status & PB_STATUS_POWER_GOOD_N)) {
> > +		ret = REGULATOR_STATUS_ON;
> > +		goto unlock;
> > +	}
> > +
> > +	ret = pmbus_regulator_get_error_flags(rdev, &status);
> > +	if (ret)
> > +		goto unlock;
> > +
> > +	if (status & (REGULATOR_ERROR_UNDER_VOLTAGE | REGULATOR_ERROR_OVER_CURRENT |
> > +	   REGULATOR_ERROR_REGULATION_OUT | REGULATOR_ERROR_FAIL | REGULATOR_ERROR_OVER_TEMP)) {
> > +		ret = REGULATOR_STATUS_ERROR;
> > +		goto unlock;
> > +	}
> > +
> > +	ret = REGULATOR_STATUS_UNDEFINED;
> > +
> > +unlock:
> > +	mutex_unlock(&data->update_lock);
> > +	return ret;
> > +}
> > +
> >   static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
> >   {
> >   	struct pmbus_data *data = i2c_get_clientdata(client);
> > @@ -2995,6 +3038,7 @@ const struct regulator_ops pmbus_regulator_ops = {
> >   	.disable = pmbus_regulator_disable,
> >   	.is_enabled = pmbus_regulator_is_enabled,
> >   	.get_error_flags = pmbus_regulator_get_error_flags,
> > +	.get_status = pmbus_regulator_get_status,
> >   	.get_voltage = pmbus_regulator_get_voltage,
> >   	.set_voltage = pmbus_regulator_set_voltage,
> >   	.list_voltage = pmbus_regulator_list_voltage,

Naresh