[PATCH net-next 2/3] net: pcs: altera-tse: don't set the speed for 1000BaseX

[Maxime Chevallier]

When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.

Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
---
 drivers/net/pcs/pcs-altera-tse.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c
index e86cadc391e8..be65271ff5de 100644
--- a/drivers/net/pcs/pcs-altera-tse.c
+++ b/drivers/net/pcs/pcs-altera-tse.c
@@ -102,7 +102,6 @@ static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 		if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
 	} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
 		if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
-		if_mode |= PCS_IF_MODE_SGMI_SPEED_1000;
 	}
 
 	ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
-- 
2.38.1