Re: [PATCH v4 7/7] soc: renesas: Add L2 cache management for RZ/Five SoC

From: Lad, Prabhakar
Date: Fri Nov 25 2022 - 05:50:46 EST


Hi Conor,

Thank you for the review.

On Thu, Nov 24, 2022 at 9:31 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Thu, Nov 24, 2022 at 05:22:07PM +0000, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > On the AX45MP core, cache coherency is a specification option so it may
>
> How about:
> "Cache coherency is an option feature of the AX45MP core, so it may not
> be supported."
>
Sure, I'll update that.

> I keep finding that sentence kinda hard..
>
> > In this case DMA will fail.
> "The AX45MP predates the standard extensions for cache management, so an
> alternate approach is required to support non-coherent DMA for SoCs
> where this feature is not available, such as the Renesas RZ/Five."
>
> (you've gotta explain somewhere why this is in drivers/soc/renesas lol)
>
I dont want to touch that fiery topic ;)

> > As a workaround, firstly we
>
> How about:
> " Since the cache management instructions cannot be used, we instead
> allocate..."
>
Sure, I'll update that.

> > allocate a global dma coherent pool from which DMA allocations are taken
> > and marked as non-cacheable + bufferable using the PMA region as specified
> > in the device tree. Synchronization callbacks are implemented to
> > synchronize when doing DMA transactions.
> >
> > The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
> > block that allows dynamic adjustment of memory attributes in the runtime.
> > It contains a configurable amount of PMA entries implemented as CSR
> > registers to control the attributes of memory locations in interest.
> >
> > Below are the memory attributes supported:
> > * Device, Non-bufferable
> > * Device, bufferable
> > * Memory, Non-cacheable, Non-bufferable
> > * Memory, Non-cacheable, Bufferable
> > * Memory, Write-back, No-allocate
> > * Memory, Write-back, Read-allocate
> > * Memory, Write-back, Write-allocate
> > * Memory, Write-back, Read and Write-allocate
> >
> > This patch adds support to configure the memory attributes of the memory
> > regions as passed from the l2 cache node and exposes the cache management
> > ops.
> >
> > More info about PMA (section 10.3):
> > Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
>
> But yeah, this is basically the sort of stuff that'd be nice to have in
> the previous patch!
>
Agreed, I'll include this in the binding patch too.

> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > RFC v3 -> v4
> > * Made use of runtime patching instead of compile time
> > * Now just exposing single function ax45mp_no_iocp_cmo() for CMO handling
> > * Added a check to make sure cache line size is always 64 bytes
> > * Renamed folder rzf -> rzfive
> > * Improved Kconfig description
> > * Dropped L2 cache configuration
> > * Dropped unnecessary casts
> > * Fixed comments pointed by Geert, apart from use of PTR_ALIGN_XYZ() macros.
> > ---
> > arch/riscv/include/asm/cacheflush.h | 8 +
> > arch/riscv/include/asm/errata_list.h | 32 +-
> > drivers/soc/renesas/Kconfig | 7 +
> > drivers/soc/renesas/Makefile | 2 +
> > drivers/soc/renesas/rzfive/Kconfig | 6 +
> > drivers/soc/renesas/rzfive/Makefile | 3 +
> > drivers/soc/renesas/rzfive/ax45mp_cache.c | 415 ++++++++++++++++++++++
> > drivers/soc/renesas/rzfive/ax45mp_sbi.h | 29 ++
> > 8 files changed, 496 insertions(+), 6 deletions(-)
> > create mode 100644 drivers/soc/renesas/rzfive/Kconfig
> > create mode 100644 drivers/soc/renesas/rzfive/Makefile
> > create mode 100644 drivers/soc/renesas/rzfive/ax45mp_cache.c
> > create mode 100644 drivers/soc/renesas/rzfive/ax45mp_sbi.h
>
> > diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
> > index 660498252ec5..e7810256c60d 100644
> > --- a/drivers/soc/renesas/Kconfig
> > +++ b/drivers/soc/renesas/Kconfig
> > @@ -340,9 +340,16 @@ if RISCV
> > config ARCH_R9A07G043
> > bool "RISC-V Platform support for RZ/Five"
> > select ARCH_RZG2L
> > + select AX45MP_L2_CACHE
> > + select DMA_GLOBAL_POOL
> > + select ERRATA_ANDES
> > + select ERRATA_ANDES_CMO
> > + select RISCV_DMA_NONCOHERENT
>
> Is this not redundant due to the select by ERRATA_ANDES_CMO?
>
Indeed, I'll drop it.

> > help
> > This enables support for the Renesas RZ/Five SoC.
> >
> > +source "drivers/soc/renesas/rzfive/Kconfig"
> > +
> > endif # RISCV
> >
> > config RST_RCAR
>
> > diff --git a/drivers/soc/renesas/rzfive/Makefile b/drivers/soc/renesas/rzfive/Makefile
> > new file mode 100644
> > index 000000000000..2012e7fb978d
> > --- /dev/null
> > +++ b/drivers/soc/renesas/rzfive/Makefile
> > @@ -0,0 +1,3 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +obj-$(CONFIG_AX45MP_L2_CACHE) += ax45mp_cache.o
> > diff --git a/drivers/soc/renesas/rzfive/ax45mp_cache.c b/drivers/soc/renesas/rzfive/ax45mp_cache.c
> > new file mode 100644
> > index 000000000000..4e0d0545d3af
>
> Mainly just whizzing through the driver itself..
>
> > +static int ax45mp_configure_pma_regions(struct device_node *np)
> > +{
> > + const char *propname = "andestech,pma-regions";
> > + u32 start, size, flags;
> > + unsigned int entry_id;
> > + unsigned int i;
> > + int count;
> > + int ret;
> > +
> > + count = of_property_count_elems_of_size(np, propname, sizeof(u32) * 3);
> > + if (count < 0)
> > + return count;
> > +
> > + if (count > AX45MP_MAX_PMA_REGIONS)
> > + return -EINVAL;
> > +
> > + for (i = 0, entry_id = 0 ; entry_id < count ; i += 3, entry_id++) {
> > + of_property_read_u32_index(np, propname, i, &start);
> > + of_property_read_u32_index(np, propname, i + 1, &size);
> > + of_property_read_u32_index(np, propname, i + 2, &flags);
> > + ret = ax45mp_sbi_set_pma(start, size, flags, entry_id);
> > + if (!ret)
> > + pr_err("Failed to setup PMA region 0x%x - 0x%x flags: 0x%x",
> > + start, start + size, flags);
>
> I have to ask - is it okay to just continue here if a RMA region setup
> fails?
>
Ok so incase of failures "ebreak" is called, so continuing doesn't
cause any harm I guess.

> > + }
> > +
> > + return 0;
> > +}
> > +
>
> > +static bool ax45mp_cpu_cache_controlable(void)
> > +{
> > + return (((ax45mp_cpu_get_micm_cfg_status() & AX45MP_MICM_CFG_ISZ_MASK) ||
> > + (ax45mp_cpu_get_mdcm_cfg_status() & AX45MP_MDCM_CFG_DSZ_MASK)) &&
> > + (ax45mp_cpu_get_misa_cfg_status() & AX45MP_MISA_20_MASK) &&
> > + (ax45mp_cpu_get_mmsc_cfg_status() & AX45MP_MMSC_CFG_CCTLCSR_MASK) &&
> > + (ax45mp_cpu_get_mcache_ctl_status() & AX45MP_MCACHE_CTL_CCTL_SUEN_MASK));
>
> That's a bit of a mouthful lol!
>
>
> > +static void ax45mp_cpu_dma_inval_range(void *vaddr, size_t size)
>
> Not mine to look after so /shrug but this looks like the sort of thing
> that could do with a comment or two explaining the invalidation process.
>
Sure, I'll add some comments.

> > +{
> > + char cache_buf[2][AX45MP_MAX_CACHE_LINE_SIZE];
> > + unsigned long start = (unsigned long)vaddr;
> > + unsigned long end = start + size;
> > + unsigned long old_start = start;
> > + unsigned long old_end = end;
> > + unsigned long line_size;
> > + unsigned long flags;
> > +
> > + if (static_branch_unlikely(&ax45mp_l2c_configured) && !ax45mp_priv)
> > + return;
> > +
> > + if (unlikely(start == end))
> > + return;
> > +
> > + line_size = ax45mp_priv->ax45mp_cache_line_size;
> > +
> > + memset(&cache_buf, 0x0, sizeof(cache_buf));
> > + start = start & (~(line_size - 1));
> > + end = ((end + line_size - 1) & (~(line_size - 1)));
> > +
> > + local_irq_save(flags);
> > + if (unlikely(start != old_start))
> > + memcpy(&cache_buf[0][0], (void *)start, line_size);
> > +
> > + if (unlikely(end != old_end))
> > + memcpy(&cache_buf[1][0], (void *)(old_end & (~(line_size - 1))), line_size);
> > +
> > + ax45mp_cpu_dcache_inval_range(vaddr, (void *)end, line_size);
> > +
> > + if (unlikely(start != old_start))
> > + memcpy((void *)start, &cache_buf[0][0], (old_start & (line_size - 1)));
> > +
> > + if (unlikely(end != old_end))
> > + memcpy((void *)(old_end + 1),
> > + &cache_buf[1][(old_end & (line_size - 1)) + 1],
> > + end - old_end - 1);
> > +
> > + local_irq_restore(flags);
> > +}
>
> > +static int ax45mp_configure_l2_cache(struct device_node *np)
> > +{
> > + int ret;
> > +
> > + ret = of_property_read_u32(np, "cache-line-size", &ax45mp_priv->ax45mp_cache_line_size);
> > + if (ret) {
> > + pr_err("Failed to get cache-line-size defaulting to 64 bytes\n");
> ^
> Looks like you need a comma here...
>
OK.

> > + ax45mp_priv->ax45mp_cache_line_size = SZ_64;
> > + }
> > +
> > + if (ax45mp_priv->ax45mp_cache_line_size != SZ_64) {
> > + pr_err("Expected cache-line-size to 64 bytes (found:%u). Defaulting to 64 bytes\n",
> ^
> ...and a "be" here.
>
> Would you also benefit from a pr_fmt here since you have no device? Or
> else you could save the dev to your ax45mp_priv and avail of dev_err
> here?
>
Sure, I'll switch to dev_err()

> > + ax45mp_priv->ax45mp_cache_line_size);
> > + ax45mp_priv->ax45mp_cache_line_size = SZ_64;
> > + }
> > +
> > + ax45mp_priv->ucctl_ok = ax45mp_cpu_cache_controlable();
> ^
> That function name is a typo, should be called ax45mp_cpu_cache_cache_controllable().
>
Ok, I'll rename it to ax45mp_cpu_cache_controllable().

> > + ax45mp_priv->l2cache_enabled = ax45mp_cpu_l2c_ctl_status() & AX45MP_L2_CACHE_CTL_CEN_MASK;
> > +
> > + return 0;
> > +}
> > +
> > +static int ax45mp_l2c_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *np = pdev->dev.of_node;
> > + int ret;
> > +
> > + ax45mp_priv = devm_kzalloc(&pdev->dev, sizeof(*ax45mp_priv), GFP_KERNEL);
> > + if (!ax45mp_priv)
> > + return -ENOMEM;
> > +
> > + ax45mp_priv->l2c_base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
> > + if (!ax45mp_priv->l2c_base) {
> > + ret = -ENOMEM;
> > + goto l2c_err;
> > + }
> > +
> > + ret = ax45mp_configure_l2_cache(np);
> > + if (ret)
> > + goto l2c_err;
> > +
> > + ret = ax45mp_configure_pma_regions(np);
> > + if (ret)
> > + goto l2c_err;
> > +
> > + static_branch_disable(&ax45mp_l2c_configured);
> > +
> > + return 0;
> > +
> > +l2c_err:
> > + devm_kfree(&pdev->dev, ax45mp_priv);
> > + ax45mp_priv = NULL;
> > + return ret;
> > +}
>
> > diff --git a/drivers/soc/renesas/rzfive/ax45mp_sbi.h b/drivers/soc/renesas/rzfive/ax45mp_sbi.h
> > new file mode 100644
> > index 000000000000..1604874954d0
> > --- /dev/null
> > +++ b/drivers/soc/renesas/rzfive/ax45mp_sbi.h
> > @@ -0,0 +1,29 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +
> > +#ifndef __AX45MP_SBI_H
> > +#define __AX45MP_SBI_H
> > +
> > +#define SBI_EXT_ANDES 0x0900031E
> > +
> > +enum ax45mp_sbi_ext_fid {
> > + AX45MP_SBI_EXT_GET_MCACHE_CTL_STATUS = 0,
>
> Is that zero not implied?
>
I had a feeling we always had to explicitly specify in the Linux
coding standard.

Cheers,
Prabhakar